View Full Version : Daewo Matiz Key Problem
3R1
3rd May, 2014, 05:13 PM
Hi to all.
I have a problem with a Daewoo matiz 2002 key.
Costumer lost the first key ( which he used all the time in 2 years ) and when he tried the second one it didn't work
When the ignition is switched on the immo light goes off and after 3 sec it comes back flashing
Can someone please verify the 93lc56 dump .
The Id of the second key is
ID:807D608B
and if you can add this key with this ID too
ID:E22EEC3E
Thanks a lot
madzar
3rd May, 2014, 09:07 PM
Program new 93c56 with old content and add key with T300 100% works
immokill
3rd May, 2014, 09:37 PM
Program new 93c56 with old content and add key with T300 100% works
Or , just try to add key with T300 or SBB . Worked for me.
3R1
3rd May, 2014, 09:53 PM
Thanks guys for the reply but tried both of them.
First changed the 93c56 eeprom and after tried to add a key with TEXA but neither of them worked
Thats why I want to know if I can add that key directly to data without try with equipment
If yes can you modify the data with that keys ID
Thanks
ekvas
3rd May, 2014, 10:19 PM
Or , just try to add key with T300 or SBB . Worked for me.
YES, in daewoo is a lot going on
madzar
4th May, 2014, 02:23 AM
Thanks guys for the reply but tried both of them.
First changed the 93c56 eeprom and after tried to add a key with TEXA but neither of them worked
Thats why I want to know if I can add that key directly to data without try with equipment
If yes can you modify the data with that keys ID
Thanks
I will send you working files with keys AND you will add key easy
Sent from my iPhone using Tapatalk
igorr
4th May, 2014, 07:39 AM
you nead first to reset ecu and then program keys and all be fine
3R1
4th May, 2014, 09:13 AM
This solution haven't tried igorr
Will try and give the report
Thanks
madzar
4th May, 2014, 07:57 PM
Here is example just check maybe files are swaped.Also check sichronization like Igorr mentioned
3R1
4th May, 2014, 08:30 PM
Thanks a lot guys for your help. Will test them tomorrow morning and let you know. :)
ciptel07
5th May, 2014, 05:44 PM
use blank id 48 and program with t300
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.