VECTRA C Security Wait time Active

[phm59]

Hi,
sorry for my english
I have vectra c 2005 with psg16,I read dump with carprog but pin 0000,I don't entered pin with op com ,security wait time active for 21h20,I wait 24 hrs with op com and ignition (with battery supplie) but not entered pin,security active in ecm.
I read psg16 dump with bdm.
Where security wait time in the EEprom dump please?
Thanks for your help.
Regards.

[Bllinda]

The_pin_coed_is_3017

P.S. Be sure to click ....

[phm59]

Hi,it's not ok,not functionnally because security wait time in ECM active,I want switch this security in EEPROM dump,I look this but I didn't found the place in dump.
Thanks

[super jumbe]

You can disconnect the battery for 15 min after that time connect both battery wires for another 15 min that should sort your issue.

[Meat-Head]

Disagree with above post, go leech another dump, compare, lock the leeched dump up, re compare, go play with your self

[phm59]

You can disconnect the battery for 15 min after that time connect both battery wires for another 15 min that should sort your issue.

The battery was disconnected 24hrs and reconnected 24hrs several times unsuccessfully and connect wires both battery for reset and unsuccefully yet.

[phm59]

At present, me puts zones of the EEprom in FF to try to find the wait time.

[Meat-Head]

At present, me puts zones of the EEprom in FF to try to find the wait time.

So why not leech another dump and lock that up, easier

[phm59]

because for flash,I need EEprom jtag read(bdm,galletto...),not carprog read,it's differently,looks dump between differently,
I didn't found correctly EEprom on forums for psg16.

[Bllinda]

Compare or write and find out where is the clock. Or lock.

[valyex]

Hi! Sorry for my english. I have the some problem on Vectra C 2002 with PSG16. The Security Wait Time in ECM si active for 10h40. I waited 12h with ignition on without success.
What I need to do after that 10h40? I only waited with ignition on. I have one Op Com China Clone. Can it help me?
It's need to stay with door open, with OP-COM connected, or something like that? Please help me. :(

[k1champion]

You must go to programming with oppcom and when you see wait time active stay opcom on + ignition on for what tam you need in wait time active !!

[valyex]

Thanks k1champion but can you give me more details? With Op-com I can see security wait time in Measuring Blocks not in Programming. I do something wrong?


You must go to programming with oppcom and when you see wait time active stay opcom on + ignition on for what tam you need in wait time active !!

[k1champion]

Go to programing and make to program psg16 den you will see security wait time and wait with it.

[MJRVR]

Hi! Sorry for my english. I have the some problem on Vectra C 2002 with PSG16. The Security Wait Time in ECM si active for 10h40. I waited 12h with ignition on without success.
What I need to do after that 10h40? I only waited with ignition on. I have one Op Com China Clone. Can it help me?
It's need to stay with door open, with OP-COM connected, or something like that? Please help me. :(

Theres a rumour you have to have all other modules plugged in and programmed for the timer to countdown.
Is everything plugged in and programmed?

[valyex]

All modules are plugged but I don't know if are programmed. I'll verify.
So, if all is plugged and programmed, it is need to ignition on, connect opcom and in ECM module menu, at programming, I will see the countdown timer? It's need to enter Security Code before see countdown?



Theres a rumour you have to have all other modules plugged in and programmed for the timer to countdown.
Is everything plugged in and programmed?

[Crisanto]

Hello sir can u you help me for security wait time active 21hours then almost 24 hours waiting but not active any solution? im using opcom opel zafira psg16 2005..

[ziko]

Hm, I see not only me has this problem with sec wait time 20:21:00
I think flashing ecu with tech2 solve this,but still not confirmed