X-tool questions and answer.

[Seby_TM]

Hi,

Can some one tell me if work OK to made immo off for VW Sharan 2003 by obd II with this tool ?

I don't know what ecu had in car because is not at me yet the car, I think need to be EDC 15 or 16.

Thanks.

[auto techniek]

Hi


Can anybody help me by posting backup files of the x tool x100 pro. My sd card does not work any more and need to change it.

Changed the sd card but i get this error448491

[Nicolas9]

Hi


Can anybody help me by posting backup files of the x tool x100 pro. My sd card dows not work any more and need to change it.

This is wrong topic for you.

[xm3n]

Hi


Can anybody help me by posting backup files of the x tool x100 pro. My sd card dows not work any more and need to change it.

http://www.digital-kaos.co.uk/forums/showthread.php/491145-OBDSTAR-X-100-Pro-Mileage-Correction-Feedback

Post your question here mate :) this is for x-tool

[auto techniek]

sorry thanks a lot

[TOINO]

Good day friends, I have smok tool so far in renault okay, now when it does block abs information the onboard computer clio4 megane 3 trafic stand malfunctioning,
My question is if anyone has xtool experience in this day, and in the affirmative if the xtool flash causes problems or not in renault dashs

[cokolo]

Good day friends, I have smok tool so far in renault okay, now when it does block abs information the onboard computer clio4 megane 3 trafic stand malfunctioning,
My question is if anyone has xtool experience in this day, and in the affirmative if the xtool flash causes problems or not in renault dashs

Same thing with all other tools Dp4,Enigma,Avdi,..... except with Smok you have option for change km in dashboard without blocking abs module when you work complete car (dashboard and abs ).

[TOINO]

Is true friend but for this I had not spent my money spent on smok and do as I did before I got smok with x prog and block abs outside

[TOINO]

Someone has experience with x tool in renault, the panel works as it should be or not! After flash to lock abs info

[atesbocusu]

wait wait wait wait.

[karalada]

After flash with x tool dash works fine

[teerak2uk]

After flash with x tool dash works fine
This must be the only tool on the market that flashes and without problems after PMSL [emoji1]

[TOINO]

ent?o voce diz x tool pisca ta?o filtra dados bs e tra?o fica a funcionar bem no computador debordo e contagem de quilometros?

[TOINO]

So you say x tool blinks tails filter data bs and dash stays fine in the onboard computer and kilometer count?

excuse in english

[diagtech2000]

Has everybody on here got the original x-tool (official) from their website?

http://www.x-tool.org/

Or is thread about a clone version?

Cheers




Sent from my iPhone using Tapatalk

[Diablotic]

There is no clone. Original only.

[diagtech2000]

Ok cheers for that


Sent from my iPhone using Tapatalk

[guillermoc]

Hello, I have consulted several users including X-tool.org but I do not have many answers to my doubt regarding X-Tool and BSI's for OBDII, try with partner, 206, 208, 408, C4 and I could not get connection in any Case, "comunication error" is always the message, do you know why it can be? Thank you for your contributions.

[davorOS]

206 eeprom 95160 no obd, only eeprom, 208, c4, done bsi by obd,

[salamandra]

Cem Volvo C30 conection?
9s12 256
1l1y
Thanks https://uploads.tapatalk-cdn.com/20170602/a3d2ae1813d68f00ac42675d9a8a54b2.jpghttps://uploads.tapatalk-cdn.com/20170602/2f15c0b42cd95dfaf4b70170a2434d1a.jpghttps://uploads.tapatalk-cdn.com/20170602/809ca497f7498a93736288b2c481e21d.jpg


Enviado desde mi iPhone utilizando Tapatalk Pro

[guillermoc]

Hi, here I am with a problem equal to the one I had a while ago regarding a VW Brazil combo instrument, the other time I could solve it, with your help, programming first by ODII and then NEC soldering wires. Now the problem is that this Combined board does not recognize communication by OBDII in G6 NEC + 95320, only changes the Km by Gol G5 24c16 but when cutting the current the originals return, what happens, has the data on another side besides the board? I appreciate your help.

[m_yura]

please schematic adapter a4 - car radio rns 510 !!!

thanks

[pstryk74]

hi all i sell one full xtool NEW :) version full adapters and update 2017 year + certyficate .
its ori software and hardware .

remmeber one art.
info skype .

[pstryk74]

m_yura
please schematic adapter a4 - car radio rns 510 !!!

thanks


-please register forum xtool and ask admin meyby give you diagram adapter A4

[pstryk74]

mr salamandra
Cem Volvo C30 conection?
9s12 256
1l1y



mcu9s12dg256 security remmeber! read xprog m

go hands multi and check punct connect mcu easy only 4art connect

mcu pin 23 ist BKGD
40 VSS
41 VDD
42 RESET


I GREET pstryk74

[Team dz]

SEAT- -IBIZA

ibiza black line 2015



DACHBORD ---- SEAT ----CAN----Mii OBD 2 ------
READ KM ........OK
Security........OK
WRITE KM ...........OK

déconnecter batterie 30 seconde

X-TOOL WORK 1 MINITE

[Team dz]

Renault symbol 2012 NEC via ..... ok
hyundai accent 2013-2014-2015 via obd 2
hyundai accent new 2015 nec+eeprom via ....ok
vw caddy 2013 via obd 2
vw golf 6 gtd 2013 via obd 2
vw golf 6 gtd 2014 via obd 2
SKODA YOTI 2013 VIA OBD 2
skoda octavia 2013 via obd 2
skoda rapid 2013 via obd 2
audi Q5 2009-2011 via obd 5
Peugout 308 2013 via obd bsi Dash direct eeprom. Perfectly.
PEUGOUT 208 2013-2014 VIA OBD
SEAT IBIZA 2013-2014-2015 VIA OBD
renault CLIO 4 2013 ABS + DACH VIA OBD
SEAT LION 2012 VIA OBD
VW PASSET B7 2013 VIA OBD
PEUGOT 207 2012-2013 BSI OBD Dash direct eeprom. Perfectly.
AMAROK 2012 VIA OBD

[Team dz]

Vw Tiguan R-Line Boite auto 2013 work perfect 1 minite !
POLO 2014 work perfect 1 minite !


Kia sorento 2016 via obd ok

[autoTkey]

...
renault CLIO 4 2013 ABS + DACH VIA OBD
...

Do you mean you XTOOL managed to change mileage in ABS by OBD too ?

[waldi1979]

Peugeot 301
BSI-OK
Dash - connection error....

[Triniguy]

Have 2010 Range Rover Sport with 24c16 and X-Tool has no option for that

Any suggestion how to read/write this eep with X-Tool????

[wadim21]

renault capture 2014 dash block sync ABS ok

[danielboom00]

Hi folks,

anybody bought recently x-tool from x-tool.eu?

i paid a month ago, after 20 days and a lot of shit conversation on skype he send me all the cables but not the tool, and now he´s not even answering or getting my phone calls...

please take care with this guy, if anybody knows him in person can help me to solve this...

thanks in advance

[SEAT.]

i have ordered a kit from them aswell, was told he will send via dhl now he used ems and told me he was short paid with 50 euro,i ordered it on 2 Oktober not sure what is in the post

[Dayo]

Xtool.eu is very rude. All he wants to do is take your money and run. Only buy from xtool.org (kermol)

[koyot]

stop false feedback
someone just advertise selling

[teerak2uk]

Xtool.eu is very rude. All he wants to do is take your money and run. Only buy from xtool.org (kermol)True .

[alen112]

Hello, I have one question?
I bought it recently x toll full it cost 1490 euros I'm interested in why the crash data is red and I can not delete it file let's say the Peugeot 307 and any other type of vehicle
when I try to delete it from calculator airbag

Do I have to update brasil to do airabag

479020

[Diablotic]

Did you read eeprom from airbag module?

[alen112]

Did you read eeprom from airbag module?

yes with upa

[alen112]

Did you read eeprom from airbag module?

and open the file I select the car by pressing the clear crash I'm recording a file comparable and it will be the same

[Diablotic]

Did you load the file correctly to x-tool?

[alen112]

Did you load the file correctly to x-tool?


yes 100% ...............

[alen112]

yes 100% ...............

Maybe I need update brasil

[alen112]

Maybe I need update brasil

Any help my

[paulocesar]

D:applause:Dash jetta brazil 2014 work 100%km

[Nicolas9]

ford transit connect/courier 2016 (small display) didnt work with courier2014 option. it worked by Kuga 2013-

[digimile]

hi
ford everest /endevour/ show old km ok but wont write security error...but when open dash and put it back it show what u want to make how...i dont understand.....
thanks

[brkic6]

Anybody can send me version 10.9 of X-tool?
Regards,
Vladimir

[xm3n]

Anybody can send me version 10.9 of X-tool?
Regards,
Vladimir

i am not sure about this version but it's last december update give it a try..


https://mega.nz/#!cEM03CiD!lgkZa8hGTdir7dJUeRbgAoz0HJ3nyOygETLdUer 5FKU

[brkic6]

i am not sure about this version but it's last december update give it a try..


https://mega.nz/#!cEM03CiD!lgkZa8hGTdir7dJUeRbgAoz0HJ3nyOygETLdUer 5FKU
That’s the catch. Last version 2016 was 10.9, but when you try to start jt, it is actually 10.11, and in that version some things just don’t work... So, I still need 10.9... :(
Regards,
Vladimir

[Nicolas9]

Anyone succes with Peugeot 208 dash + Valeo bsi by obd?
When I try. Old mileage comes back (key not on contact just insert key only)

[davorOS]

peugeot 208 work by obd - modify km in BSI (valeo) obd to zero = modify dash to zero=0, disconnect battery 2 min, connect battery, km=000000, modify km to new value (dash), disconnect battery 2 min, connect battery, all ok, if not, repeat the procedure 2 times !!!

[bugarcek]

I have this tool for 1,5 year... Bought from x-tool.org- Kermol... 1 month ago I had a problem obd stopped working and I could not do any job... I contacted Kermol via skype and first ther was no answer for a day it must be very bushy man... But than we taked about problem, I just make a photo of device and he tell me what I have to change. I make a photo of the obd cable and he said that I have old version which does not have transistor for protect itself. He said, he will send me new one... I just want to say, first I was angry and I just thinked that I will stay without tool but he surprised me positivelly and send me new obd cable for FREE (tool is not in waranty anymore)... Now my tool works great and I can just say that Kermol is honest person and I highly recommend you to buy tool from him... For its price is good tool

[xm3n]

I have this tool for 1,5 year... Bought from x-tool.org- Kermol... 1 month ago I had a problem obd stopped working and I could not do any job... I contacted Kermol via skype and first ther was no answer for a day it must be very bushy man... But than we taked about problem, I just make a photo of device and he tell me what I have to change. I make a photo of the obd cable and he said that I have old version which does not have transistor for protect itself. He said, he will send me new one... I just want to say, first I was angry and I just thinked that I will stay without tool but he surprised me positivelly and send me new obd cable for FREE (tool is not in waranty anymore)... Now my tool works great and I can just say that Kermol is honest person and I highly recommend you to buy tool from him... For its price is good tool


yes i Agree :)

[schouten1977]

new chr ok use auris software

[Nicolas9]

Dacia dokker 2017 Ok.
(Used 2013 option. Was 2013 dashboard)

[moto111]

Hi I am looking to buy this xtool without any problems can somebody send me skype link for trusted person so i can have a smooth tranaction, i have already messaged them two weeks ago via there website and i got no reply thank you.

[lucic66]

X TOOL.ORG....
Hi I am looking to buy this xtool without any problems can somebody send me skype link for trusted person so i can have a smooth tranaction, i have already messaged them two weeks ago via there website and i got no reply thank you.

[lucic66]

Hy, ay have ver.10,46,my problem Passat 2009,Sekurity acces...error,thanks,Nice day.

[Nicolas9]

You probably took the wrong option.
Try 24c32 and 24c64. And if colour screen try TFT 24c64

[Cllau]

Hi I am looking to buy this xtool without any problems can somebody send me skype link for trusted person so i can have a smooth tranaction, i have already messaged them two weeks ago via there website and i got no reply thank you.

http://www.x-tool.org
3 days delivery, Kermol is the developer and he is a very busy man and honest. He will answer to you when he gets time for it. I did the same, just payed with PayPal and got in contact with him after purchase.

[Cllau]

Avensis 70F35xx 2016 OBD with X-Tool :driver:

[lucic66]

Hy,ay try old function,not work,thanks.
You probably took the wrong option.
Try 24c32 and 24c64. And if colour screen try TFT 24c64

[sjc1]

Can x-tool change miles on Corsa E? Any issues?

[Nicolas9]

Can x-tool change miles on Corsa E? Any issues?
it works.......

[Team dz]

Peugout 208 Hdi aller 2016 bsi and dach work Perfect 1minite
Seat lion-2.0 2014 FR not work Update 2017

[sjc1]

2011 vivaro reads mileage but stays the same after write even when dash fuse is removed for 5 seconds, has any one been successful?

[Nicolas9]

2011 vivaro reads mileage but stays the same after write even when dash fuse is removed for 5 seconds, has any one been successful?
I had the same.
I disconnected battery for 1min. Didn't work. Then disconnected for 2min. Then it did work!

[sjc1]

Thanks I'll try that I tried the fuse and disconnected the dash but only got 10 seconds

Have you used edc15 immo off via obd did it work?

Is there any functions that youve tried that don't work or have corrupted/damaged the module/ecu etc?

[HeXeN]

edc15 immo OK.
a3 edc16 immo off works. and climatronic and power windows working ok.

[marina_rv]

2011 vivaro reads mileage but stays the same after write even when dash fuse is removed for 5 seconds, has any one been successful?

Opel Vivaro dash milis or km ? left or richts ?

[sjc1]

miles right hand drive

[sjc1]

I had the same.
I disconnected battery for 1min. Didn't work. Then disconnected for 2min. Then it did work!

I tried with battery disconnected and still shows old mileage any ideas? Iv only just purchased x-tool and all 3 cars Iv tried so far it hasn't worked 😟

[drpeter]

I tried with battery disconnected and still shows old mileage any ideas? Iv only just purchased x-tool and all 3 cars Iv tried so far it hasn't worked 😟Sounds like the superprog tool they made before x-tool.

[gijsvm]

Sounds like the superprog tool they made before x-tool.


:):):):) at least the compagny are the same cheaters..

[marina_rv]

miles right hand drive

dash Opel Vivaro = dash Renault Trafic

[Nicolas9]

i never had problems with xtool on any vivaro/trafic.

why you dont just remove dash and program eeprom 93c76? it's a 10min job

[sjc1]

Yea doing it manually isn't a problem. I bought the tool thinking it would save me time etc

Does any functions work?
Thinking I have just wasted alot of cash. Maybe I can get a refund via PayPal
And buy smok. I'll speak to x-tool maybe my unit has a fault x-tool seem to have more good reviews than bad

[Steve182]

anybody knows if it works on FORD FIGO 2017 ???

[sepistar]

Tuareg edc16 kline no connection.
Rb8 ok.

[sepistar]

Clio sagem nec,9020 not working,by dash connector.
Read eeprom calc ok.

[talk2idris]

hello
anyone have idea regarding FORD eco Sport and Ford Figo Aspire odometer Correction for new model
like 2017 and 2018
here are the pics
506501506502

[Littey]

anybody tried the x-tool on the Toyota Wigo? it is supposedly supported but it is not indicated on where or how to solder the adapter on the gauge cluster.

[Nicolas9]

Audi q3 2012 tft didn't work. (with smelecom Ok)

[marina_rv]

Clio sagem nec,9020 not working,by dash connector.
Read eeprom calc ok.

Clio dash Nec MCU no ext. eeprom - correct to Diagn dash pin.
Clio dash eeprom 95020 - only read eep in programmer.
Clio dash eeprom 24c04 - correct to OBDII
Clio dash eepron 93c76 - correct to OBDII

[marina_rv]

Audi q3 2012 tft didn't work. (with smelecom Ok)

no work in old version program.
new version - ok
video --->>> https://www.youtube.com/watch?v=EonRB5fYWVc <<<---

[Nicolas9]

no work in old version program.
new version - ok
video --->>> https://www.youtube.com/watch?v=EonRB5fYWVc <<<---
i have v10.47. so quite new version.
and mine was colour screen, your video was black/white.

and sure, some colour screens q3 would also work.. but apparently not all software versions..

by the way, the error said: cannot read skey (normal key, no keyless)

[Nicolas9]

anyone did cas2 diag?

[manfred2]

cas2 - work, (not all hw).
regards.

[Nicolas9]

i tried vw t5 2011 color dash.

I couldn't read Skey. tried all options.

also digiprog and obdstar couldn't do it
very strange . old vw.

obdstar said
sw0044
hw0016

[atomiczen]

Golf 7? which version? only 2014+ or also 2012.2014?

[Nicolas9]

Opel Karl 2018. obd ok. 2 seconde
use option Corsa E..

[shotaaa]

Hello, is it possible to change km thru OBD opel corsa D 2013 1.3d with xtool ? i can not find this model, only corsa c and e.

[javyb]

Hello, is it possible to change km thru OBD opel corsa D 2013 1.3d with xtool ? i can not find this model, only corsa c and e.No it's corrected by eeprom.

Sent from my SM-G950F using Tapatalk

[shotaaa]

No it's corrected by eeprom.

Sent from my SM-G950F using Tapatalk

So read eeprom 35080, calculate with xtool opel corsa d 35080 vdo, and write file back to the eeprom ?

[eprst]

Golf 7? which version? only 2014+ or also 2012.2014?
only 06.2014+

[teerak2uk]

Read chip
erase chip
write new edited dump to chip

Remove chip to do all of the above.
So read eeprom 35080, calculate with xtool opel corsa d 35080 vdo, and write file back to the eeprom ?

[cutiutza]

please need mileage corection on audi a5 2014 with 25320 eeprom.....i have some problem with my tool..and i have to stay a few days to be repaired...help me with this mate..i will atach files...i whant 183000 km,the car have234827 km

[sjc1]

has any one used x-tool to correct 2014 Kia sportage any issues? TIA

[Nicolas9]

kia sportage works..



new update:

Suzuki Grand Vitara 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Kizashi 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2014... 70F35xx+24c16 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2017... 70F35xx Colo by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2017... 70F35xx Monochrome by OBDII - repair odometer, read\write Eeprom

[zckariya70]

xtool is magic tool..................... i changed a duster with this tool km changed sucessfully, then i unpluged the cluster power socket and re fixed it the old km is back , and then i did with smok and the job done perfectly, again today did vw jetta with xtool changed km sucessfully, disconnected the battery and fixed again the km is back again, then did with vvdi job done sucessfully with this tool...................so x tool does magic..........................:)

[shotaaa]

Hello, somebody tried Opal zafira j 2008 ? i see this model not in the menu... or must i choose other type in the menu ?

[pierre renault]

try with Astra or Insignia should work

[Nicolas9]

should it work with Audi rs4 2006?

[shotaaa]

I tried to read eeprom st 91560 with xtool the programmer says pins correct but i get READ ERROR

[brend]

Look at better pin contakt......

Because you coment like this ........... programmer says pins correct but i get READ ERROR.........just bul:load:.


I tried to read eeprom st 91560 with xtool the programmer says pins correct but i get READ ERROR

[shotaaa]

Look at better pin contakt......

Because you coment like this ........... programmer says pins correct but i get READ ERROR.........just bul:load:.

The programmer says pins contact oke after,that is trieng to read en givs the message read error.
I tried also with the clip a2 but still the saime.
I tried with windows 7 starter and windows 10.
Or it doesnt matter which windows i use ?

[Cllau]

xtool is magic tool..................... i changed a duster with this tool km changed sucessfully, then i unpluged the cluster power socket and re fixed it the old km is back , and then i did with smok and the job done perfectly, again today did vw jetta with xtool changed km sucessfully, disconnected the battery and fixed again the km is back again, then did with vvdi job done sucessfully with this tool...................so x tool does magic..........................:)

X-TOOL is full of bad surprises m8....:mad-new::damnmate:

[Nicolas9]

today Audi rs4 2006. obd ok

[honingkoning]

today Audi rs4 2006. obd ok

WoW real great News [emoji1][emoji1][emoji1].

[sjc1]

EDC16 immo off via obd has any one tested it? Does any one know why the tool now says to connect direct to ecu?

[sendreq]

I did immo off by OBD in few EDC16 Octavia. It worked well.
You can try with older software version, perhaps it will work.

[sjc1]

It seems it's just the Kline option that has changed. I'm just curious as to why?

[Nicolas9]

new update

Citroen C4 Cactus 2014... by OBDII - repair odometer, read\write Eeprom
Citroen C4 Grand Picasso 2014... Mono by OBDII - repair odometer, read\write Eeprom
Citroen C4 Grand Picasso 2014... TFT by OBDII - repair odometer, read\write Eeprom
Citroen C4 Picasso 2014... Mono by OBDII - repair odometer, read\write Eeprom
Citroen C4 Picasso 2014... TFT by OBDII - repair odometer, read\write Eeprom

but until which year can we do bsi??

[shotaaa]

I have some problems with the xtool programmer... i can not read any chip.
With other programmer can read the same chip without any problem.
Somebody know's what this is ? or how to solve this problem ?

https://www.youtube.com/watch?v=tYkGPA6OcSI

[Nicolas9]

the video is not sharp.
try with the eeprom cable? see if it works. then you know if problem is this reader or xtool it self

[lush29]

I have some problems with the xtool programmer... i can not read any chip.
With other programmer can read the same chip without any problem.
Somebody know's what this is ? or how to solve this problem ?

https://www.youtube.com/watch?v=tYkGPA6OcSIMaybe your chip adaptor is not good.
Happen to me before.

Sent from my SM-G950F using Tapatalk

[shotaaa]

the video is not sharp.
try with the eeprom cable? see if it works. then you know if problem is this reader or xtool it self

I tried also with eeprom cable (a2) still the same not reading... i got the xtool now like 2 weeks and this is the seconde time that i tried to read a chip but no succeed.

[SEAT.]

Try to untick pin check

[atomantmk]

There is no problem to read with A2 adapter, i read and write without problem.

[shotaaa]

Try to untick pin check

I tried everything with adapter a1, adapter a2, to untick pin check,i chek the adapter wire connections etc.. i think the problem is the xtool self. I got the programmer like 2 weeks now, other fucntions work well but only
the eeprom programmer dont work, i tried diffrent type eeproms but also not work.
I think must send back for repair.

This is buy the way better sharp video

https://youtu.be/EiImYSGE58E

[Dejfat]

.................................................

[Diablotic]

Wrong thread m8.

[Cllau]

X-Tool v10.66EDC17 TC1793 - repair CRC in Eeprom (calculator)

[Nicolas9]

X-Tool v10.66EDC17 TC1793 - repair CRC in Eeprom (calculator)

What can you do with it?

[Cllau]

It's mentioned there... :guns: repair CRC in EDC17

[zckariya70]

kia sportage works..



new update:

Suzuki Grand Vitara 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Kizashi 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 70F3422 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2014... 70F35xx+24c16 by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2017... 70F35xx Colo by OBDII - repair odometer, read\write Eeprom
Suzuki Swift 2017... 70F35xx Monochrome by OBDII - repair odometer, read\write Eeprom


Read security error, did not read orginal km , cannot write km.............

[Cllau]

Renault Master 2015 OBD - will read ori Km, will read Eeprom and save by OBD then will write the new KM, will say writing OK, but will not change. You have to read eeprom and edit manually....

[xtech]

reconct cluster fuse

[Cllau]

I've tried fuse, battery, cluster plug no change..... It's done by now manually....

[djamelEZS]

please for all members never buy x-tool .org=.eu same thief company
very bad relation ship
not sending goods very slow more than 2 monthes to get mine
have dongle not connected never send it mine never used again
not free shinping from 1400euro they receive money and ask to get 200 euro for sending
NEVER BUY THIS TOOL X-TOOL=SHIT COMPANY

[shotaaa]

please for all members never buy x-tool .org=.eu same thief company
very bad relation ship
not sending goods very slow more than 2 monthes to get mine
have dongle not connected never send it mine never used again
not free shinping from 1400euro they receive money and ask to get 200 euro for sending
NEVER BUY THIS TOOL X-TOOL=SHIT COMPANY


Where you ordered .org or .eu because i ordered about 3 weeks ago and i recive it in 5 days.

only the eeprom programmer is not working correct i must send back for repair. I test on many cars everything works good...

[zckariya70]

.................................................. ......

[billykillkelly]

great works 2016 passat ...

[shotaaa]

i did today citroen c4 dash and bsi write ok but after disconnecd the batery old km came back....

Citroen c4 2012

[Dejfat]

xtool promised 1 year free update i bought xtool from indian seller with full option but now indian update have been relesed for ford figo aspire & maruthi swift . but x tool says its pay option. i have posted this in the xtool forum but now they banned me. so i request not to buy xtool.org tools here after ...................
That's bad for their reputation. Sounds like fraud.

[Nicolas9]

It is correct , you get (maximum) 1year update. (Until end of calender year).
But India and Brasil updates are not included in basic packedge. You just could have read on website.. so I think it's your own fault

[zckariya70]

Kermol has activated indian version for me Thank you !!...................:)

[shotaaa]

Could somebody update to 10.67 ? Or is this update not ready yet ?

[zckariya70]

Could somebody update to 10.67 ? Or is this update not ready yet ?


Not ready yet,..............

[shotaaa]

Not ready yet,..............

Okeyy.......

[shotaaa]

Did somebody tried airbag clear of renault spc560 continetal thru obd ?

[wadim21]

Yes. Work!

[shotaaa]

Yes. Work!

I tried today, all was okay ! Model renault twingo 2015

[sepistar]

great works 2016 passat ...

have you done?
which model of dash.

[lucic66]

Hy all ,wat step its for adjust km Citroen DS3,year 2012 with X TOOL,thanks.

[digimile]

hi
online update of this work..how to update...becasue no reply from x-tool.org
thanks

[lucic66]

Hy,i have 10,47 update ,bat ai have one mistake,change km in dash OK,in BSI OK,after run 1 km back old km.Mi mistake maybe ,i put ON IGNITION.In this moment coback too me the car,i try PUT KEY NO IGNITION.
hi
online update of this work..how to update...becasue no reply from x-tool.org
thanks

[shotaaa]

Hello, have somebody ever send xtool back for repair ?
I send back for repair its now about 9 days there, they dont reply on any phone whatsapp message or email, is this normaal that tooks so long for repair ?

[Happy786786]

It has to be 14 working days don’t include the weekends
So basically it’s 6 days Since you’ve sent


Sent from my iPhone using Tapatalk

[shotaaa]

It has to be 14 working days don’t include the weekends
So basically it’s 6 days Since you’ve sent


Sent from my iPhone using Tapatalk

Oke and how about the reply on message or email is that normaal that they dont answer ? On whatsapp also they read but dont answer.
Even yes or no is to much for them very weird people.
very unfortunate that they deal with customers in this way.

[Happy786786]

Well the only thing I can say there’s billions trillions people all
Over the world will be trying to get in touched
So therefore on your turn they will read you back
If email them


Sent from my iPhone using Tapatalk

[shotaaa]

Well the only thing I can say there’s billions trillions people all
Over the world will be trying to get in touched
So therefore on your turn they will read you back
If email them


Sent from my iPhone using Tapatalk

I understand that they are busy people, but you can expect a simple yes or no within 9 days.
You can read my question on whatsapp but do not give an answer for 9 days.
I just have to accept that those people are a bit strange.

But when ordering everything went very quickly.

[sjc1]

^^^^^^ what was the fault with the tool?

mine took 3/4 weeks to be returned

[shotaaa]

^^^^^^ what was the fault with the tool?

mine took 3/4 weeks to be returned

I bought it about a month ago, immediately after receiving I tested everything did fine except the eeprom
programmer.
I could not read or write eeprom.
What was wrong with yours?
3 weeks is a very long time...

[sepistar]

skoda octavia 08.2013 mqb sw 2210 not working.
security acces (3) ok
immo ok
prog session
it start then give security acces (11) error

[wadim21]

picasso 2015 tft dash obd ok.bsi obd ok

[shotaaa]

I bought it about a month ago, immediately after receiving I tested everything did fine except the eeprom
programmer.
I could not read or write eeprom.
What was wrong with yours?
3 weeks is a very long time...



I recived about 7 days before new xtool (retour from repair), I lost my usb dongle next day i contact Kermol he send me the same day new one next day i recived.
Nice support !

[cotymoto]

I update the new versión 2018. Now try in seat car 2014 recognize and not work. Try talk with support and not response nothing. Very Very bad . Have washaap only read but not response.


https://uploads.tapatalk-cdn.com/20180724/d8e94063b2079fb64a1e61f4f7734d47.jpg

[SEAT.]

Have u tried option 2012 ,u must leave programmer to finish sometimes their are more boot errors,if it has start stop remove battery of key.

[autobo]

Hi.
I have the some problem with VW Polo 2014.First tried MQB 2012-2014 and boot error,then tried MQB 06.2014..... and all ok.

[shotaaa]

Today tried vw polo 6r 2013 johson controls, with option polo jc. Couldnt succeed i get "security error"

[Happy786786]

Johnson’s not possible


Sent from my iPhone using Tapatalk

[sepistar]

skoda octavia 08.2013 mqb sw 2210 not working.
security acces (3) ok
immo ok
prog session
it start then give security acces (11) error

smok uhds did the job.
1 min.

[Aislingob]

Hyundai I40 2016 model and Kia Sorento 2017 model, Tried both of these models with X tool and getting no communication on both of the cars , has anybody else had this problem , ??

[Nicolas9]

Hyundai I40 2016 model and Kia Sorento 2017 model, Tried both of these models with X tool and getting no communication on both of the cars , has anybody else had this problem , ??

Both should work. And no communication is very strange.
Does it still work on others cars? Maybe one cable is broken..

[Aislingob]

Both should work. And no communication is very strange.
Does it still work on others cars? Maybe one cable is broken..
It deems to work ok on Ford ranger 2017 ond2 and others , i think it might be a problem with the unit , does anybody know how to repair it , XTool told me if it was OBD2 lead a new replacement one is 250 Euros which is totally stupid price , has anybody had to buy new obd2 lead for their X tool ??

[cotymoto]

seat Ibiza 2016, not work. recognize good but always same error 3.

[cotymoto]

Ford transit connect 2016 ok, 15 sec.

[Corbo152]

Hi, WIll this do KM correction and crash data reset on the following:

C63 amg 2012
66 range rover evoque
2016 fiesta eco boost
2017 ford ecosport
2012 renault traffic

Also via OBD or EEPROM?

Thanks

[shotaaa]

Hello after correction of milleage v50 2005 i get error on dash for brakes and abs... mileage change oke but error on the dash of brake abs...

[sjc1]

Have you tried to read and clear errors?

[sendreq]

shotaaa drive the car few meters, errors will disappear

[shotaaa]

After driving a while... the error's disappeared.

[shotaaa]

Hello, can do this model peugeot 206 year 2002
BSI thru obd ? Or must do it manuel BSI and dash ?

Regards.

[karalada]

This model BSI can not go through OBD

[shotaaa]

Citroen c3 2018 somdebody tried this year ?

Regards.

[Nicolas9]

Don't work

[shotaaa]

Is it possiblle mini cooper 2006 CAS thru obd ? or must do manuel the dash and the cas ( i think is cas 3 or 3+).

Regards

[qwojtus]

Is it possiblle mini cooper 2006 CAS thru obd ? or must do manuel the dash and the cas ( i think is cas 3 or 3+).

Regards

No. It has EWS and HC12DG128A in the big clock so you need use programmer for it.

[shotaaa]

Yesterday did polo 6r 2012 johnson controls. Change mileage oke, client goes home next day the old mileage cames back...

[cotymoto]

you not work good friend.

[cotymoto]

dacia lodgy 2018 ok. 4 min. block abs and dash by obd

[cotymoto]

scenic 2 working good, perfectly obd.

[cotymoto]

golf 5 . clonning dash full. 3 min by obd. read sec and write sec. read pin and km

[Juragagan1]

Audi A6 4G Dash works well.

[mikkhh]

is newer 2017 2018 ford transit working?

[cotymoto]

Ford transit 2017 working good

[shotaaa]

you not work good friend.

What you mean by you dont work good ? What am i doing wrong can you tell me ?

[andrej_z]

Volvo S60 2012, dash, DDM and PDM working good.

[wadim21]

Renault Scenic3 ecu SID 305 mileage by obd.not working. Read mileage ok, but could not change.change Only last regeneration mileage

[wadim21]

Passat B8 2015 VDO not working.OBD STAR 3min job

[shotaaa]

Hello, is possible to do bmw x6 2012 cas thru obd or must remove and do the cas manuel with other programmer ?

[Nicolas9]

Hello, is possible to do bmw x6 2012 cas thru obd or must remove and do the cas manuel with other programmer ?

is possible. but not all software versions.

let us know if yours worked

[Dayo]

any body done dash swop on 2011-2016 caddy? is it full obd or bench job?

[shotaaa]

Hello did somebody tried fiat talento 2017 ?

[tuning1980]

szukam dowland ​ magic dash can.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=78300&d=1315268692)

[wadim21]

Espace 5 abs via obd—-ok

[Happy786786]

May I know how good it’s on PSA cars
As all French cars have BSI

Tanx https://uploads.tapatalk-cdn.com/20180829/bf3a20fe3656414826cb361890d717e5.png


Sent from my iPhone using Tapatalk

[Nicolas9]

May I know how good it’s on PSA cars
As all French cars have BSI

Tanx


Sent from my iPhone using Tapatalk

not all french cars.

it works fine. mostly until 2016. and valeo also 2016-
smok is better

[Nicolas9]

Espace 5 abs via obd—-ok

which option did you select in menu?
and how long did it take?

thnx

[wadim21]

Megan 4, Scenic 4

[shotaaa]

Somebody tried volvo v50 2009 OBD ? I get comunicetion error.

And also autodetect dash can not found wich model..

[Happy786786]

not all french cars.

it works fine. mostly until 2016. and valeo also 2016-
smok is better

Tanx


Sent from my iPhone using Tapatalk

[shotaaa]

Today tried peugeot partner 2008 bsi by obd and dash manuel.
Disconnected batery put dash in the car and connecd batery but old milleage came back.

Tried one more time, change km in bsi (jc) and read the bsi it gives that mileage change oke..and dash manuel... but same result old mileage came back.

[Happy786786]

Do bsi again take the dash out first
Put lower numbers in bsi and actual figures in Dash



Sent from my iPhone using Tapatalk

[Happy786786]

Do bsi again take the dash out first
Put lower numbers in bsi and actual figures in Dash



Sent from my iPhone using Tapatalk





Sent from my iPhone using Tapatalk

[gogovaseev1]

hi guis , anyone know how can i repair my x tool to can read eeprom on board without desolding from pcb, i have a version from 2015 year and now 1 friend take the last 1 device and told me then new divace read eeprom direktly on board,is posible do also mi divaice?

[Nicolas9]

today kia rio 2012.
it said write error.
but was ok in dash.

[shotaaa]

Hello mates, i have a renault twingo 2015 with crash.
So i tried to clear crash data thru obd, i have choose the option renault spc560, it find the crash and i cleared. After read it one more time it says crash cleared.... so i cleared also the fault codes.
After i tried to start the car, but the car doesnt start so i diagnose the car again and the fault codes are back. I tried a couple of times to clear fault codes but they coming back again.
On the Diagnois it says that the crash is not gone in module, but if i read with xtool with the option renault spc560 it says cleared crash.

[shotaaa]

Hello mates, i have a renault twingo 2015 with crash.
So i tried to clear crash data thru obd, i have choose the option renault spc560, it find the crash and i cleared. After read it one more time it says crash cleared.... so i cleared also the fault codes.
After i tried to start the car, but the car doesnt start so i diagnose the car again and the fault codes are back. I tried a couple of times to clear fault codes but they coming back again.
On the Diagnois it says that the crash is not gone in module, but if i read with xtool with the option renault spc560 it says cleared crash.

554877 i have still this fault in the car after erase the crash thru obd

[teerak2uk]

Renolink SW works well

[system101]

Yesterday did polo 6r 2012 johnson controls. Change mileage oke, client goes home next day the old mileage cames back...

what is the end of this story???? The most programmer do not support johnson controls

[shotaaa]

what is the end of this story???? The most programmer do not support johnson controls

Dp4, avdi, enigma i was curious if there was any experience with this kind of cluster using xtool

[danyman80]

Shotaa how much it lasted to get back the device you sent for repairs? you said you didnt get a response even after 9 days....

[shotaaa]

Shotaa how much it lasted to get back the device you sent for repairs? you said you didnt get a response even after 9 days....

It was about 2 weeks i get it back from repair. They send me new one.

[shotaaa]

Skoda kodiaq 2018 write km ok !

[311786]

Toyota Yaris 2012 93c66 changed mileage. Mileage Changed to value inputted all dial working as should. But when driving car mileage display stops moving trip keep on resetting itself. Bug may need to be fixed sent supported bin to X-Tool one week no reply so far.

[Nicolas9]

Toyota Yaris 2012 93c66 changed mileage. Mileage Changed to value inputted all dial working as should. But when driving car mileage display stops moving trip keep on resetting itself. Bug may need to be fixed sent supported bin to X-Tool one week no reply so far.
dont wait for reply.

please upload original file and tell which mileage it is and you need

[311786]

No longer needed to change sorted by another tool.:beer:

[doditntd]

Hello everyone. I'm new in the use of x-tools. I have to do a clio of 2015. how should I proceed to change the kilometers and block the abs?
first I read flash, then I write it with "unlock dash" or "block abs" ??
please help me, thank you?

what does it mean and what does "write with unlock DASH" do?

[Team dz]

Hello.
peugeot 3008 2014
BSI JC obd -OK!
Dash obd -OK!

Ford focus c-max 2012 read 0 km, I did not write . - not oK.

citroen C5 2005r bsi jc obd -OK!
Vw Golf 7 _2013 work obd
Seat lion _2013 work obd

Skoda oktavia 2016 via obd

[Team dz]

Renault Clio 3 work via obd 2

[doditntd]

hello. I have x-tool. anyone help me to change km on alfa Romeo Giulietta 2015 please ?

[tavicu21]

hello.dacia lodgy year 2012 securyty acces error.......not work.....and suport bad

[zckariya70]

hello.dacia lodgy year 2012 securyty acces error.......not work.....and suport bad


lodgy works 100% without any problem..............i did many

[Nicolas9]

hello. I have x-tool. anyone help me to change km on alfa Romeo Giulietta 2015 please ?
Remove cluster and program eeprom

[marina_rv]

hello. I have x-tool. anyone help me to change km on alfa Romeo Giulietta 2015 please ?

read eeprom only programmer 24C16 or 24C32.

[marina_rv]

hello.dacia lodgy year 2012 securyty acces error.......not work.....and suport bad

please send info name dashboard + version software.

[tavicu21]

if you want ,y send a video
570035this ist for
zckariya70 (http://www.digital-kaos.co.uk/forums/member.php/405360-zckariya70)
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/statusicon_blue/user-offline.pngin forum x tool are 20 post with this problem.y do many dacia but y have dacia lodgy with securriti error.,and answer for my problem ist wrong select.y spoke with mr kermol but nothingif you want to send a videoanswer

[marina_rv]

if you want ,y send a video
in forum x tool are 20 post with this problem.y do many dacia but y have dacia lodgy with securriti error.,and answer for my problem ist wrong select.y spoke with mr kermol but nothingif you want to send a videoanswer

work dacia 2014...2015

please diagnostic i send name + version dash

[Nicolas9]

yes works.

but i had a 2017 once. and i had to choose the 2013 option.

[billykillkelly]

2017 toyota c-hr ok... using auris 2015 menü .. take the baterry off for 5 mins

[Nestar]

Thanks you for All your review .
I try xtools on 2013 Golf 7 kilos fail

[cotymoto]

Xtool not working in ranger rover sport 2016. http://cloud.tapatalk.com/s/5bf58a5993550/VID-20181121-WA0031.mp4

Enviado desde mi SM-G950F mediante Tapatalk

[kwansterp]

Citroen Jumpy 2009 BSI Simens ok
Peugeot 407 2005 BSI JC ok
Citroen C4 GP 2011 BSI JC ok
Scenic II ok
Fiat Grande Punto ok
Calculator Ford serial V ok
35080 v6 erase ok

[kwansterp]

Audi a4 RB4 ok
Jeep Cherokee 2015 dash Continental not ok access security error.

[moto111]

2017 Auris, reads mileage incorrectly so i did not change, took out dash and checked to see whats inside it has the D7OF 3535, Would it be possible of different type version that is not supported, tried the smok also it did not read correctly also. anyone any experience with these type dashes ? Thank You

Original Reading = 56237 miles
Xtool Reading = 39407 km
Smok Reading = 48083 km

[Dayo]

Have you checked for mssop?

[isma123]

it have only df no mmsop

[quikcar]

mercedes ML W164 don't work
digiprog + fvdi clone work fine

[lucic66]

Hi all,have one Bmw e90 year 2007,must reset cas3 ,dont work ,wat method exist,thanks.

[lucic66]

????????????
Hi all,have one Bmw e90 year 2007,must reset cas3 ,dont work ,wat method exist,thanks.

[kizagt]

Hi all,have one Bmw e90 year 2007,must reset cas3 ,dont work ,wat method exist,thanks.

Read cas3 with some programmer like smok jtag, vvdi prog , xprog...

[carradio2001]

Hi !
Who have xtool setup v10.87.1 ?!!? On the site is available 10.88 which is version 2019 and 10.87.1 it is latest from 2018.
Please write pm to me if somebody have v10.87.1
Regards,
Carradio2001.

[alyahmed]

what about kadjer abs and dashbord with xtool

[Nicolas9]

what about kadjer abs and dashbord with xtool
Cannot do.....

[quikcar]

can xtool correct mileage vw polo 2016

[javyb]

can xtool correct mileage vw polo 2016No chance of that

Sent from my SM-N960F using Tapatalk