PDA

View Full Version : Audi A3 dashboard clone - adaptation please help


seba_m_
5th March, 2015, 12:49 PM
Hi, I have broken the dashboard of the Audi A3 8P0 crypto 2006 years. I have another one dashboard and I want to fit into the car. Has anyone fitting procedure using the dashboard? Or, what must be soldered to the old dashboard?

Thanks

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302766&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302767&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302768&stc=1
lupu_sandu
5th March, 2015, 12:54 PM
Read and post here Micronas+eeprom from both
seba_m_
5th March, 2015, 12:59 PM
But I've got no Micronas see on the photo IMG_4554 underneath, previously gave a different dashboard small plate but I have corrected the attachment.
lupu_sandu
5th March, 2015, 01:10 PM
In that case you have Fujitsu+93c86 dashboard. Via obd2 only.
seba_m_
5th March, 2015, 01:26 PM
Thanks. A device which can do this? I only have VCDS.
yugo45
5th March, 2015, 06:18 PM
SMOK X-Dash, AVDI and etc.
There is no cheap solution for this .
simaservis1108
6th March, 2015, 02:15 AM
Swap 93c86 + Fujitsu Processors.

You have 2,one on small board,one on big board.
seba_m_
6th March, 2015, 07:09 AM
Ok, I will give information about the results.