SRS airbag stays on, even crash data has been cleared

[yem22]

Hello,,

I got KIA Sportage 2011, i found that its SRS ECU's eerpom 25320 has bad file, because some one play with the eeprom ,
so i put a cleared new file dump to the 25320 ,, but the light stays on, and the strange thing is that there no fault code in the SRS...

any idea or help will be appreciated

ECU part NO :
95910-3W110


thanks in advance

[Meat-Head]

1) its fkuced, you need a new one

2) there is a fault, but the computer says no

3) tweet a replacement module, start again

[servicetecnocar]

place this file here and version too.

[rrador]

What scanner are you using can you scan ODS system? Probably needs calibration since file is from different car.
But should still have a code in srs module if it needs calibration.

[repairmymodule]

Try another clear file, sometimes these Hyundai's and Kia's will have SRS light with no codes if there is still some crash data, like Toyota's.

[yem22]

hello

Dear servicetecnocar, file attached,,,ver 1.1



Dear rrador, I'm using autocom Delphi,but it scan well



Dear repair mymodule,,i try more than files here in this forum but no success,, some body told me to well ground the ecm it self or it has no good connectivity with car body ground

[yem22]

it light ON and light off ,then light one again

[credoline]

Give a one more try ..

[servicetecnocar]

hi friend test this

[yem22]

thanks alot...tomorrow customer will back to me and i will report

[bassam]

yem22 your dump is bad let me now if you solved the problem