kia rio 2002 immo off simens k42

[ekvas]

i have problem with immo box, LOST KEY
93C46, 8 pin, 128 Bytes
Kia: Rio 2001>
ID: 60
Transponder Type: JMA TPX2

,i read immo 93c46 and with Tango write new dump end transporder, don`t STAR !!!



have you solucion for immo off
i have dump 29f200bb

ecm is with 5 plugs

thanks

[tqnata83]

you can not make a key whit tango this is not possible ??!!! tango work very well
your mistake or your programer is not good
post all dump of immo box org. and new from tango and key data after program new chip

and 1 more
use glass tpx2 transponder othe are bad

[ekvas]

I tried to TPX2 glass, and I tried to Tiris 4D graphite chip


Immo lamp 3 start or shut down, but the car does not turn


here's all the information about my work


thanks

[tqnata83]

the pin is 26222 write org file and try to program by obd if you have some tool
also Page 4 crypto key is FC 66 FA B5C6
1)write add key . rar to immo and try to start the car with tpx2

[ekvas]

thanks,
I've tried, but can not with SBB on OBD, have no other solucia
- this car has the old connector for motors + OBD in the car


thanks for your help

[ekvas]

Tqnata83
Now watch?!
I can give no OBD adaptation ?
i try To put your dump and the tango change page 4 crypto in TPX2.

or i`m wrong ?



thanks

[keycutters]

Hello, hope I am not late in responds but still good for anyone researching into solution.
First if all Tango Is well able to program this key, you just have to make sure you program(register) 2 keys, for some reason, even with eeprom its not able to accept only one key, if lucky it will start with the one key programmed but latter reject it. Secondly OBD programming with SBB is possible, just have to make sure you are using the right transponder type and two keys have to be programmed for it to pick, after each recycle of key the horn will indicate key (chip) is accepted, ie; u need to hear the horn twice one each for each key.