2008 Bentley

[Freebsd]

Can the 2008 Bentley immobilizer eprom be read with the Upa or with gq4 ?? Does anyone know the location and type of eprom ??? And the security bytes on it ? ...

[topclef]

Bentley 2008 : Immo Data in Kessy , serial eeprom 93C86
for 2008 , need to prapare Key with CS ....
read and post the Kessy Dump , DK friends can help you

[Freebsd]

i have the dump im not shure if it is correct ... i read it with gq4 one of them showed all fffff and the other all 0000 so im posting the one with all ff .. thanks any help apreciated ...

[topclef]

dump not correct , it is empty... , read it again properly

[Freebsd]

317524317525
here is two more i read them ... in 16 bit ....
seems ,like somthing is here but in all reality the mc is a 93c86wp .... and for reading my options are the 93c86 , a , b , c , ... not the exact 93c86wp thanks ...

[haroutioun]

Hello.
still your dump not loaded data. can you take a photo of your board of kessy & load it here? just to see if you the correct way.. and what you want to do by this dump info?.

[Freebsd]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317642&stc=1
this is the kessey i have the chip and read it again trying to get the pin code so we can program key , unless there is a way to add the key to the file then just start car .. i know the file is read in ascii .... 317643
im gonna post another bin ... im not shure if the forum alows emails if so can i email you thank u .

[haroutioun]

Hello.
OK good this is the correct module. just to understand where is the problem,please answer to my question bellow.
1) you want to add key or you don't have any key???. i am asking this to know if your dump corrupted or not.if you have working key please reconnect the kessy to the car and try start the car & see if the car start or don't?.
2) if start this mean your dump ok but your programmer can't read it or cause you don't choose the correct type to read your programmer as well the eeprom 93c86.
3) answer us all what you have to say,to arrive for solution.

[Freebsd]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317649&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317650&stc=1more photos so you can tell me if im wrong thank you ....
im using a gq4 eeprom reader the upa gives me an error ..

[Freebsd]

i do not have a key
car will not start
i have order key
1. wanted pin code
2. or wanted to add key to immo file so i can start again
please advise me.

[haroutioun]

Hello.
1) Dear,please answer for my questions in post#8.
2) you desolder the eeprom to read? or you connect clip on eeprom to read by your programmer???

[topclef]

as I see , you try to read it in circuit , if yes
remove it from board and read it again , i think it's better .....

[haroutioun]

i do not have a key
car will not start
i have order key
1. wanted pin code
2. or wanted to add key to immo file so i can start again
please advise me.

Hello.
if you don't have a key, so i have little idea maybe wrong or true.
1) maybe some who work on it before you,and he corrupted your dump,and in this case you can't do anything.
2) or your read method not correct must remove eeprom from kessy board and read it by programmer.

[Freebsd]

I have de soldered the eeprom ,,, but once desoldered I clipped it to read it , please corect me should I solder it to pcb and read , ?

[haroutioun]

I have de soldered the eeprom ,,, but once desoldered I clipped it to read it , please corect me should I solder it to pcb and read , ?

Hello.
you have 2 option.
1) you can direct connect your clip to the eeprom even the eeprom still on the kessy board,but you must carefully connect the clip cause some times can't connected well & for that when you read the eeprom can't give the full dump,and you must connect it the correct position on pin 1 of the eeprom to read if you connect the wrong position so you can't read it.

2) there is the second point by solder out the eeprom and put the eeprom in a adapter and the adapter it must in the programmer.for example i use to read eeprom 93c86 by (BeeProg+ for ELNEC)

[Freebsd]

317666
i think this is it it seems to pull alot of info..

[topclef]

you're near , read it as 8 bytes , i thin all will ok ...

[Freebsd]

317679
this is it i slowed it down also...

[topclef]

Congratulation ! :excitement:
Pin Code : 03181
this model not need CS , only Virgin Key
Good luck m8

[Freebsd]

please explain i have one of the original keys and saying immobil activated ....
can i virginize the keys i have .... ???
i have pictures of the keys ...

[haroutioun]

please explain i have one of the original keys and saying immobil activated ....
can i virginize the keys i have .... ???
i have pictures of the keys ...

Hello.
no you can't Virgin it yet,for now just Audi Q7 + PASSAT transponder 46 (pcf7936) you can unlock it to re-adapt. in your case you must have tool to try re-adapt by obd2.

[Freebsd]

Ok tell what tool ??? Or can I use skp900

[Freebsd]

Sorry for the bugging you .... Can I edit the eprom file and check and see if the keys are there ? Or am I stuck with the odb machine to add keys ??? Thanks .... I have a photo of the keys read .... I do know the batteries went dead on the vehicle and that it sat for 6months ....