View Full Version : Crafter 2.5tdi eddc16 remove DTC
immokill
14th August, 2015, 02:25 PM
Hello
Please need help to remove DTC P0546 from this ECU CRAFTER 2.5TDI.
Thanks
Regards
immokill
14th August, 2015, 02:52 PM
Please help :( I put new sensor and same error .
mihaiservice
14th August, 2015, 05:50 PM
Hi
Also if someone will remove this kind of dtc P0546- Exhaust Gas Temperature Sensor Circuit High the car will stay in limp mode
Already you have remove dpf from car ?
Mike
immokill
14th August, 2015, 07:55 PM
Yes . Dpf off ok . No limp mode . Just need DTC OFF, please.
mihaiservice
14th August, 2015, 08:39 PM
Hi
here you have dtc off.....
hvala !
Mike
immokill
14th August, 2015, 08:52 PM
Hvala :). Regards
immokill
15th August, 2015, 10:24 AM
Mate not good still error. P0546 . Please help.
immokill
15th August, 2015, 01:52 PM
Please someone help :(((
Thanks
mihaiservice
15th August, 2015, 05:40 PM
Hi
sure are the correct label of dtc ? interogate again with VCDS and upload manufactured dtc label
Mike
immokill
15th August, 2015, 06:24 PM
001350. P0546. Egt bank 1. G235
Vasily.U
15th August, 2015, 09:50 PM
Your file , you need correct cs
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.