SMOK and 912 mcu pls read owners of jtag

[dave11674]

hi guys
been working with gregorz on the 912 mcu
we got it cracked as his latest software and firmware updates had a bug and mine wasnt working

so a heads up if your doing anything with the device till the bug is ironed out

i was working on a dash mini one

the clocks were dead after doing the km with microcalc

so do this before changing anything on these clocks or anything jtag for now

read whatever device your doing....flash and save, eep and save

its one of my prime directives when using a programmer anyways

if you have the option to read it do so and save it before you try write anything

this way you have backups to fall back on


what it was doing is this...

when hooking up to dash and selecting the mcu in multiprog it was sticking on unsecuring...
then would error
so i found a flash file for the said mcu hw04 sw14 and flashed it
then i wrote the orig eep back and tested

boom it fired up...

so microcalc and changed km
powered dash again and nothing but backlights !!

so wrote the flash back and tested it and it fired up perfectly

i think when its unsecuring its fluffing the flash of the mcu up for some reason

gregorz is working on this so i thought id give you guys a heads up

dave


EDIT...
or just hang fire for a few days till gregorz fixes it ;)

[simaservis1108]

Yeah,it happens on Xprog sometimes too when reading secured MCU.

[dave11674]

if anyone has flufffed a flash have a gander on here there is lots n lots to filter through SEARCH button of course.

failing that give us a shout ill help

dave

[dave11674]

new update released for multiprog guys
fixes the issues as mentioned above

but as a safety note always make a backup first
i do
can never be safe when it comes to unsecuring these micro's

dave

[batandball]

this must be the biggest bag of ~~~~~ ive ever had
split link tools work better

[cheester]

Dave11674 what tool are u recomending to read 9s12 on mini? Will have this car tonight.....

[smartymarti]

Read Rosfar never misses

[shirokov]

Hi!

After the last update 1.40.3.6 (firmware 1.79) problem is not solved.
Checked with EZS Mercedes 211 545 10 08 with MC68HC912DC128A.
If you try to bypass the protection, the procedure fails and an error.
This partially damaged FLASH contents. And it's too bad if you have no backup.

In recent versions of the program box firmware can not be rolled back to work correctly with older versions software.
But it can be done if you use the installation kit for the earlier versions.
Install this version, disclaim network updates and program the box firmware.

Setup_MultiProg_1.14.0.1_fw_1.16.zip
https://mega.nz/#!rhpSgL7Z!GTLBAs-5U3P-o64sKc4riE6lBoejXaGY06UKImYMFuo

Then you can install a more recent version of the most stable.
For example, this version:

Setup_MultiProg_1.40.3.3_fw_1.77.zip
https://mega.nz/#!r9w31ChB!U2EGIR_gOtc8xN2rIwzOHDBd7NNtr4EiAraVtij w4Vk

Or this version, it is more stable to work with a MC68HC912DC128 series of MCU.

Setup_MultiProg_1.36.0.5_fw_1.60.zip
https://mega.nz/#!XpoDxT4T!ATRDJEZ1_-zYz-_TC9NVIyGvvEFAnvT1GUroEZ2u5kU

When you start, you should refuse to upgrade from the network. It is necessary to avoid problems.
Good luck! :)

[Fallen]

Why do people use this POS?
I have 2 units, 1 unit destroyed EVERYTHING it read and the other iv'e never been game to use on anything.

[dave11674]

i still think its a good bit of kit

dave

[yugo45]

I have Old Box , first generation , and I keep it on old software 1.37.0.8 v with Micro Calculator 1.43 V and never has problems.
For me there is no reason to Update to new one as I have only HC 12 and Micronas.

[dave11674]

TRUE
YUGO whats that broken link for in your signature mate ??

dave

[cheester]

Why do people use this POS?
I have 2 units, 1 unit destroyed EVERYTHING it read and the other iv'e never been game to use on anything.

Will you sell me one what you never used? :) PM me price with details

[yugo45]

YUGO whats that broken link for in your signature mate ??

dave
It is fixed now, it was old link and when I clear it, it remember web , it was to help one little girl that she has heart problem, unfortunately she did not survive after surgery.

[smartymarti]

I updated and did a 2013 63 cars 3 today no issues

[dave11674]

what else have you done with your JTAG smarty :) ??

dave

[cheester]

Mates, just quick question, mini cooper 2003-2006, with two small clocks over the stering wheel and big rpm on the middle (no navi) what modules need to be done for mileage? Its truth only 9s12 in middle clock is enough or ews also need to be done?

[PremierD]

Yes mate .. in the keys so EWS needs done .. also in the BCU .. ... as well as the ashtray, spare wheel, and nodding dog on the rear window ... just depends on how far you want to go .. :)

[cheester]

Would like to know the minimum what need to be done to keep the new mls :)
Tacho and EWS?

[dave11674]

just clocks in the middle mate

prem you crack me up dood :)
you forgot the locking wheel nut tho :)

dave

[techterr]

Hello,
I have the smok Jtag as part of a MBE kit.. Tried using it yesterday and it said the jtag needed update.. Went to smok.com.pl and downloaded update. The program is now 1.40.3.6, but when it try's to update the jtag, it fails on mcu2... anyone ran into this before??
thanks in advance..

[carbandit]

Try different usb cable this worked for me just last week when I had same problem

[teerak2uk]

Try different usb cable this worked for me just last week when I had same problem
Same here mine stuck on update loop because of bad cable

[dave11674]

guys i cant stress this enough
USE A GOOD GOOD GOOD QUALITY USB CABLE WITH SMOK :)

dave

[Michaelescobar]

Marty the only way to do the 2003 mini cooper 9s12 secured mcu is with the rosfar r260? On a regular cluster with out navi. So it's imposible to do it this job with a clone digiprog3 or tacho pro 2008?