Passat B7 Immo PIN / Key matching

[Dawiww]

Hi again!


I have a question: Is this possible to get out Immo PIN from Passat B7 Comfort module? I read somewhere that it is in there and maybe I can get PIN out , just don't know which memory it can be.. Can you help me somehow ? Or maybe there is other way?


With regards,
Dave

[Dawiww]

I found that PIn is in eeprom 95320 in CCM - Is that true? If i post dumb from this memory can anyone extract PIN from it? CCM part nr. 3AA959433

[Bllinda]

Another way might be the dealer. I do not know exactly sells such data.

[lupu_sandu]

Post here dump from CCM and you will get pin.

[autofan1965]

What you will do it with this PIN?

[lupu_sandu]

Steering lock adaptation, maybe?

[Dawiww]

There he is: dump from 95320WQ (4kB x 8bit) from CCM. Can anyone help? lupu_sandu?

[lupu_sandu]

VIN: WVWZZZ3CZCE045780
Pin: 56229

[Dawiww]

Thank you! It worked :) I wanted to match a second key , because to this Passat was only one , and it's not very good ; ) Now have 2 keys :)

[castin]

What is procedure learn second key? I need add second key in Passat B7 2015 with new key blade. VVDI2 extract pin, or must dismount CCM for pin read? Please some info - first time must learn key in this model.

[yugo45]

What is procedure learn second key? I need add second key in Passat B7 2015 with new key blade. VVDI2 extract pin, or must dismount CCM for pin read? Please some info - first time must learn key in this model.

What market your passat is?
Euro Passat do not have key blade .

[kubuswujo]

Hi guys!

I will have to read IMMO PIN CODE From VW Passat B7. What is the easiest way to obtain the PIN CODE?
Read eeprom from ECU?
EEPROM FROM TACHO??

Can i do it using OBD (Carprog) or have to read on table?

Ecu Epromm no problem can read with ori Ktag. But PIN will be inside ECU EEPROM?

[kubuswujo]

Can someone read PIN FROM ECU EEPROM?

I need only PIN for adapt new Column Lock in Passat B7

Ecu is edc17C46 Eeprom in dump.

Can sameone read a PIN?

[richard27]

[QUOTE = kubuswujo; 3481669] ECU EEPROM’dan birileri PIN okuyabilir mi?

Passat

B7'deki yeni Sütun Kilidi'ni uyarlamak için sadece PIN'e ihtiyacım var. Ecu, edc17C46 Eeprom'u çöplükte.

Birisi bir PIN okuyabilir mi? [/ QUOTE]
hello you pin:29784

[kubuswujo]

Ok thanks!

[kubuswujo]

HI I tried Your PIN:

29784
I tried also
029784

Its wrong can someone check if its good pin?
Or should i take out immo?
What memory to read in immo to get pin?

589885

[Medions]

do you have dump CCM ?
P.S. I answer you on other forum.

[DeloopIre]

Hi guys, can someone please help me? I'm new to this, I'm looking my Pin / key so I can make a spare key as my car came only with one. I got the VCDS software I think that should be ok to make the keys but I need the pin.

I done a scan of my car & saved the text file, I have lots of issue so

VIN: WVWZZZ3CZCP038402

Chassis Type: 3C-VW46 (7N0)

Is this the right info I need to give you? I can't read the files the other guys put up, .bin files

[DeloopIre]

Thank you! It worked :) I wanted to match a second key , because to this Passat was only one , and it's not very good ; ) Now have 2 keys :)

Dawiww I need to do this, can you please tell me what software you used to do this? ie VCDS & K can commander etc Thanks

[Weasel3]

These cars can end up as a non-runner, working by obd.
Black dashboard, and not possible to start again with original key.
When doing spare key.


Because, there is no ignition lock to turn to ON.
And have contstant power 12V. With lights in the dash/cluster.


Done this myself.
But had the backup, from the eeprom.
To write back, and get the car alive again.


For spare key, best and cheapest way.
Witout having to invest, in equipment.
Is to visit, the local Locksmith.


You can program the key, with VCDS.
If you have prepared the key, in front.
And have the PIN available.


A key from ebay will not work, unless prepared spesificly to this vehicle.


To get a such key.
Is either order from VAG dealer. Prepared at the VW factory. (But still need programming).


Or doing module reading on the bench.
And other equipment and software.
To place that file, on the tool.
And then prepare the key.

[yukiro]

..............