PDA

View Full Version : Ducato 2.8 edc15c7 immo



maxcombor
7th December, 2015, 05:46 AM
I tried 100 solution and all programs available to me in the past 20 hours and just do not. .. Ecu vonix, immo tool by t-e , otocheck and others .
Please immo off edc15c7 cf3 Fiat ducato 2.8jtd 2006
0 281 010 931

Thanks

lion0304
7th December, 2015, 06:10 AM
So better is coding new key

maxcombor
7th December, 2015, 06:36 AM
Please immo off solution ,42 to 40 in flash not work , immo box is damaged .



I 'm not asking for the removal of faults only immo off

maxcombor
7th December, 2015, 08:09 AM
The car is not near , so all I can do to test only diagnostics on the table, whether in the real parameters should stand start Not alowed Since the U1600 error is present or not ???

maxcombor
7th December, 2015, 11:57 AM
82 views and no help or idea ???
Thanks

selim95
7th December, 2015, 01:05 PM
hi
your immo off
disconect immobox !!!!!!!!!!!!!!!!!

maxcombor
7th December, 2015, 01:10 PM
Thanks, thanks, thanks selim95 (http://www.digital-kaos.co.uk/forums/member.php/450481-selim95)

maxcombor
7th December, 2015, 01:31 PM
Sorry same file tested first , immo tool by t-e , not working on 2.8 .

lupu_sandu
7th December, 2015, 01:55 PM
Your file off. Pass in pm. Remove immobox before.
Don't look on status in live data. You will have Engine Startup Not Allowed, but engine will start.

maxcombor
7th December, 2015, 01:58 PM
Thanks lupu_sandu (http://www.digital-kaos.co.uk/forums/member.php/61191-lupu_sandu) for your help .

maxcombor
7th December, 2015, 06:21 PM
Car is nonstarter Not working after few ignition all 42 come back in flash and some other ,tested without eeprom too, imobox is off all the time , demon car. Meybe Im doing something wrong . What you think Lupu . Ecu is with two conectors , made in france .

selim95
7th December, 2015, 06:40 PM
immo tool by t-e solution work 100% in this ecu !!!!!!!!!

you have other problem!!!!!

maxcombor
7th December, 2015, 09:34 PM
Thank you selim95 and BIIIIG thank to Lupu_sandu for File , car started finaly . (explanation) .Weird thing is what was happenning all the time . After flashing file on table programmer said normaly turn off for 10 seconds , and after this time turn on again . If i give power after 10sec , like programer wrote , flash starts to change everytime with new feed (car wont start). Without this extra feed after 10 sec everything is normal, car starts without problem, tested four times because i can`t believe .
Thanks again people for your time ......