PDA

View Full Version : ANY ONE CAN HELP, GMC AIRBAGS WRITE/READ, MC 9S12XDT384. THANKS


KALNAJJAR01
17th December, 2015, 10:41 PM
for gmc cars-srs module.

easier and best programmer with connection diagrams wher to soder wires without removing mcu.
or without lifting any pins, which one you recommend. price not an issue, need one easy to use.

to cover:
MC 9S12XDT384

MC 9S12XDT384 VAL

WHAT IS VAL MEAN TOO.

68HC908AS60A

68HC908AS60
tech_cz
18th December, 2015, 01:43 PM
X-Prog Box

WBR, Marek

347583

347584
SPARTANAUTOWORX
20th December, 2015, 08:08 AM
What GMC Trucks are you doing? Years?
KALNAJJAR01
21st December, 2015, 03:09 PM
2010 Buick LaCrosse
MrWho
21st December, 2015, 03:43 PM
You dont have to lift pins with Xprog?
carradio2001
18th July, 2023, 08:15 PM
X-Prog Box

WBR, Marek

347583

347584

Hi !
I followed the connection as in the picture and it doesn't work, I also found this drawing in orange-5 and I don't know what the 3 marked wires are ?
Please tell me what software need to use to read one SRS unit from Insignia GM 13575447 ?

Thx.
carradio2001
19th July, 2023, 10:50 PM
Solved with power supply the SRS unit 2x12V.
If somebody have the same issue ...
stachu22
18th August, 2023, 05:50 PM
Solved with power supply the SRS unit 2x12V.
If somebody have the same issue ...

Can you tell what connections you use for reading via Xprog? I have the same airbag unit for crash clear, connected like on photo od tech_cz (vdd, gnd, reset, bkgd, xclks) just from back side and nothing, only "bypass security" on Xprog.
You connected 2x12v to airbag socket without vdd of Xprog?