View Full Version : Switching out Cluster on 04 Vw Jetta
pkeeney
29th January, 2016, 04:39 PM
What info needs to be transfer from one cluster to the next to make it plug and drive?
pkeeney
29th January, 2016, 11:47 PM
Hello http://uploads.tapatalk-cdn.com/20160129/c335c75ec5877a07f2954409c30bdb58.jpg new cluster
http://uploads.tapatalk-cdn.com/20160129/0278acd2820bc8111a8e8a066ae03b24.jpg old clusterhttp://uploads.tapatalk-cdn.com/20160129/50f3f61581aeed3cf68c4cc155515b2f.jpg
Sent from my SM-N910V using Tapatalk
ruffles1986
29th January, 2016, 11:50 PM
If have same reference copy eeprom and shoul be work. If not same reference and PIN code from both cluster are know then can be adapt with VCDS
pkeeney
29th January, 2016, 11:51 PM
I hope everyone is having a great day........ If I can kill the immo I would prefer that.
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 12:00 AM
Made 2 keys (required) for a 2015 ford f150 today if alarm is activated you cant program key. Tried adding 3button fob by doing the ignition cycle but didnt work I ended up having to use the keypad on the door to kill alarm.
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 12:01 AM
I wonder if their is a way to cycle actuators through OBD port
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 10:12 PM
http://uploads.tapatalk-cdn.com/20160130/29047c7ec7bd3adc9366c368d2d8ce9b.jpg
Which eeprom holds the info I need to transfer
Sent from my SM-N910V using Tapatalk
ruffles1986
30th January, 2016, 10:57 PM
I think is USA version? thats right? I believe eeprom 93c86
Kellerek
30th January, 2016, 10:58 PM
in my opinion changing just eeprom will not do any good to you...eeprom is crypted by micronas flash
use x-prog to read flash and eeprom by points from both clusters the upload it hire I will transfer immo block for you
pkeeney
30th January, 2016, 11:13 PM
I think is USA version? thats right? I believe eeprom 93c86
Yes
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 11:16 PM
in my opinion changing just eeprom will not do any good to you...eeprom is crypted by micronas flash
use x-prog to read flash and eeprom by points from both clusters the upload it hire I will transfer immo block for you
Dont have a x-prog. Can I use a any eeprom programmer that supports that chip type? Is the pin code located in cluster or ecu? Thanks
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 11:30 PM
I'm doing this for free its a learning thing for me. I know there are tools to make this process go very easy I'm just trying to see if there's a workaround
Sent from my SM-N910V using Tapatalk
pkeeney
30th January, 2016, 11:30 PM
What is the best tool to have to work with Volkswagen and Audi.
Sent from my SM-N910V using Tapatalk
ruffles1986
30th January, 2016, 11:32 PM
If dash is rb4 or rb8 maybe the best way is adapt it with pin by diagnostic session.... i not do it never with these dashboard, but it shoul work
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.