View Full Version : How to clone PSA MED17.4 Tprot8-12? (Tricore 1796)
soxten
6th February, 2016, 01:42 PM
I have a broken MED17.4 0261201602 / 9664416980 as I need to clone to a used.
Magicmotorsport can`t read this full only Xrom.
Ecu has Tricore 1796
Eeprom
Irom
Xrom
Xrom I can read by magic, but get checksum fault(?)
Irom is not PW/OTP protected (it say) but I need a pass file to read info and Magic cant do that.
Eeprom (I cant find a separate Eeprom so it must be inside MCU Tricore 1796)
I attached my reading of Xrom
Is the best way to do Immo of in Xrom? Can "EDC17 immo off" from ECUVionix do that?
356355
Please need help!
soxten
7th February, 2016, 10:58 PM
Any experiens here on DK?
Help
ecumix
8th February, 2016, 03:13 PM
Here you are immo off but checksum must calculate by programmer use ktag no problem with checksum .
Enjoy
soxten
9th February, 2016, 11:14 AM
Here is Xrom from used as I need immo off.
356828
soxten
16th February, 2016, 07:11 AM
ECUmix can you help me?
CustomCars
16th February, 2016, 04:25 PM
ECU can be cloned but:
- needed install new MCU in second ecu
- jump OPT sector, but then will work only immo off or second ecu must by adapted.
soxten
17th February, 2016, 12:01 AM
Hi CustomCars
New mcu in used ecu?
Problem is that We can only read Xrom, Irom is code protected....
So I think we get problem to change mcu(?)
Immo off, who or what tool can immo off?
Adapted used ecu? Who or what tool?
acab
17th February, 2016, 12:21 PM
can anybody help to read flash from med17.3.1?
antlio
17th February, 2016, 04:31 PM
Hi
You can t read the eeprom at TC1796 .Only flash and you can im*o off in flash .
regards
soxten
17th February, 2016, 08:55 PM
Antlio what program or who can do this?
antlio
18th February, 2016, 05:47 AM
Hi
I use byteshooter but also FGtech clone can do this .
regards
soxten
18th February, 2016, 03:21 PM
Reading is no problem but immo off.
What program can do immo off?
H2Deetoo
19th February, 2016, 10:25 AM
I can do immo off in eeprom for M(EDC)17.
There are some public tools to do immo off in flash also.
soxten
19th February, 2016, 11:24 AM
On this MED17.4 you cant read Eeprom, pass protection.
Only flash to read.
Zmann
19th February, 2016, 11:51 AM
This's part of eeprom data in your flash file :)
358881
antlio
19th February, 2016, 07:24 PM
There isn t part of eeprom in the flash . There isn t code .
soxten
20th February, 2016, 07:48 AM
Magicmotorsport did make a working immo off file to me.
Work perfekt.
i_shot_the_sheriff
3rd April, 2017, 08:41 AM
Mate , care to share the immo off file that worked for this ecu?
I've tried several options in manual immo off but none worked. I'm programming it with KTAG original...
Thanks in advance
acmotor
19th April, 2017, 06:49 PM
Try this ...
Immo is in MPC
search for this sequence in whole or just part of it:
F00FF480208B022022
Change it to:
F00FF4802000008212
done,
immo is off!
It works all the time!
i_shot_the_sheriff
21st April, 2017, 09:04 AM
Hello mate
I already tried this solution and make checksum with KTAG while write but still ecu not unlock !
elneomaster
20th October, 2020, 05:27 PM
Hi;
I have the same problem, I need Immo Off for this ecu 0261201602 / 9664416980 MED 17.4 with TC1796. The original ecu was stolen.
This are the files read with ktag.
esse
20th October, 2020, 09:21 PM
Hi,
Here..........
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.