mitsubishi lancer 2013 need clear crash airbag

[eliaselias]

358982

mitsubishi lancer 2013
need clean crash
eeprom 93c56
8635a274 ... only 1 airbag available on steering wheel

[repairmymodule]

These should not store crash. You should only have to Re-Zero passenger seat

[eliaselias]

this car dont have air bag on the seat ,, its only have on steering wheel

[repairmymodule]

It should have airbag in passenger side of dash and that is what the seat sensor switches on and off according to passengers weight. So you must go into special functions menu of airbag system and re-zero seat sensor

[eliaselias]

beleive me there is no airbag on seat... the car is coming from asia and only have 1 airbag

[eliaselias]

do you have any solution >?

[clusters]

Scan the SRS for codes, if you get DTC B223D you need to recalibrate the passenger seat sensor.

[eliaselias]

I am getting dtc 35 :deployed

[repairmymodule]

I see. Sorry i was thinking it had a dash bag.

If you have the car there with yuo to test, You can try to '00' the top 2 lines. May do the trick

[alismotors]

I see. Sorry i was thinking it had a dash bag.

If you have the car there with yuo to test, You can try to '00' the top 2 lines. May do the trick

I think repairmymodule of the rights 00 :listen:

[eliaselias]

thanks for your file i have try it before.. still same thing... i have remove the dashboard plug and reinsert it ... problem soved