SCION FR-S 2013 ALL KEY LOST

[achaccha]

Dear Friend
I can say that the key is programmed into the integrated unit which is 93C86 eprom. The client lost all your keys. In some workshop they have tried to program the key using different equipment as Tcode, SKP900 and also tried reading via eprom, but all they have done is corrupt the information of the integrated unit.
I entered with the original escanner I reset immo and after 20 minutes tells me that has zero keys, when programming does not get me any transponder. According to the catalog of JMA should the transponder is TP34, but I used this and other possibilities such as the G and H keys Toyota, also the Subaru, but no program.
Please can you tell me what type of transponder used this vehicle?
I would like to know if anyone has a virgin file for this integrated unit of the vehicle.
Thank you

[ray-ray]

I read out a Scion FR-S and a Subaru wrz (Toyota 72G) and the Subaru read out as a Mitsubishi chip.

[achaccha]

Thank you very much for your contribution but TP34 is a 4d72 and tested this possibility without success. Perhaps the problem is the corrupt information.
regards

[KriptoKey]

I dont have had this car in my hands, but as I see the catalog is a 4D68. Are you have tried this possibility?
I also understand that the key is written on the computer network (integrated unit).
I welcome your comments
luck

[cjawahir]

post dump

cj

[achaccha]

Thank you very much for your support.
I await your prompt help
a hug

[cjawahir]

need read this unit in the pic

[achaccha]

need read this unit in the pic

Dear Friend
I have disarmed the entire board and I have also followed the wiring according to the diagram, I found the connector "Transponder key ECU" well stapled to the body with a safety precinct. This makes me think that this vehicle is not considered the "Transponder key ECU" as part of the immobilizer.
someone can help me with a blank file for the ecu network? (Integrated unit).
Thank you

[mcgywer]

Hi,
can anyone make reset for Scion FR-S 2014 with bladed key?

Immo box Subaru 88210CA210 with 93C86

Thanks in advanced
Mat

[forumoto]

Is the Immobilizer the integrated box, pm me

[achaccha]

This car not have unit integrated box.
thanks for your coment

[forumoto]

This car not have unit integrated box.
thanks for your coment


have you get the car started, i mean the frs, do you still need help or you re done, which country re you from...

[achaccha]

If friend thank God everything was solved. Thanks for your concern.
https://www.youtube.com/watch?v=kWNxkl386U8&feature=youtu.be

[siyadk]

loved your "bingo"

Did the tango add the transponder to dump?

[cjawahir]

If friend thank God everything was solved. Thanks for your concern.
https://www.youtube.com/watch?v=kWNxkl386U8&feature=youtu.be

so u come here ask for help , no care in the world to say thanks and u solve the car .


care to explain ?

cj

[achaccha]

Dear Friends.
Tango can not add the key to this vehicle yet. In the video only reading key is seen with tango. All programming of the key, is carried out with the scanner dealer.
regards

[siyadk]

so you added by techstream? did a immo reset?

[achaccha]

As explained at the beginning, this vehicle was well-thumbed by other workshops. the information was corrupted. So we had to work hard to restore the file and then make the adaptation of the engine ECU.
I hope to help someone when similar problem arises.
regards

[maxim200]

All keys lost to Toyota GT86 2017
Is it possible to make a transponder from the eeprom memory?


Subaru Denso ECU 112800-3831 - there is no eeprom memory
Integ Unit Assy Denso, USK 232800-0330 - has 93c86 memory but I think it does not contain information about the keys

Does this car have, for example immo box or something like that ?


I will be very grateful for every help, regards

[ammreid]

Your original question was "Which Chip this car uses" did you find out? I don't think it is Toyota G chip... can you say which transponder is used by this vehicle?