VECTRA C 93LC76 CIM PIN NEED

[hector]

Hello friends...
I need a pin from dump to 93LC76 to CIM module Vectra C.
thanks a lot!!!

375587

[TPS]

PIN - 1303

[hector]

Thanks a lot!!!!.
A question please...
I've to put a scrapping CIM, Is it possible?.
I've changed a 93LC76 but not work, now i'll try reset it with a pin with OP-COM, It's OK?
Thanks!!

[hector]

I searched for DK and i've found a manual for remplacing CIM

[hector]

Just in case.. can you search the pin of scrapping CIM too?
Thanks!!!

[TPS]

PIN - 5711

[hector]

Hello.... Is possible the OP-COM clone doesn't work for learn new CIM?
I try , but not work. reset scrapping CIM is Ok, but programing ecuS NOT ok.
Thanks

[Jashmine1983]

I've programmed scrap CIM to a vectra C a week ago and worked with op-com. Pay attention on all the info from your file.

Sent from my V9H using Tapatalk

[hector]

I tried with file manual, but when i try program BCM, it tell me conditions not correct.
I don't undersntand.

[teerak2uk]

Hello.... Is possible the OP-COM clone doesn't work for learn new CIM?
I try , but not work. reset scrapping CIM is Ok, but programing ecuS NOT ok.
Thanks
Opcom clone works fine

[teerak2uk]

I tried with file manual, but when i try program BCM, it tell me conditions not correct.
I don't undersntand.
Plug original back in and reset it first then plug new one in and try if still not working then new cim needs tech2 reset

[hector]

Hello, the CIM reseted and programed OK!!!
The problem is BCM and other units.
I try pin code but not work!!

[Staker]

the bcm and others remains the old car pin code!!!

[hector]

Yes. I reset the BCM with 1303 PIN, and it is OK!!. The CIM scrapping with 5711, and OK too.
But i try program new PIN with 1303 to BCM again it show the window error

[Staker]

hmm, have you missed the pin any time ? Check the security wait time if it is active

[hector]

I think, when i reseted the BCM , reset is not OK and it may be corrupt.
Security wait time is correct.