PDA

View Full Version : Audi A6 VDO dash virgin state please.



amigokola
5th September, 2016, 04:15 PM
Hello Guys...
I have dash to change with VCDS but it has to be in Virgin State (4).396257
VVDI2 cant do it Eeprom programmer also. Thank's in advance.

haroutioun
5th September, 2016, 04:24 PM
Hello.
your loaded dumps pin is (06048) try read the dump from the next dash load here to get pin code and after adapt the new dash by vcds. vvdi2 i think can't read k-line he have problem in K-line for vag.

amigokola
5th September, 2016, 04:54 PM
I have both PIN's but I can't adapt it with VCDS (system not ok). Used dash has to be in state 4 to adapt it in Audi. I've read eeprom from new dash with VagEepromer also. There are few bytes different than VVDI2 read. You see that it's bad read ?? There is window in VVDI2 "Make Virgin" but it is not active after obd read...

amigokola
5th September, 2016, 05:48 PM
Someone can make it virgin ??

amigokola
6th September, 2016, 06:26 AM
Guys ??? Anyone ???

lupu_sandu
6th September, 2016, 07:05 AM
Your dash virgin.

amigokola
6th September, 2016, 08:35 AM
Thank's to Lupu for virgin file but I cant adapt this cluster even with this file. I also changed Immo status to "1" but no go.. My procedure:

17-login-ch50-login-system not ok
17-login-ch50-leave32000-wait (nothing happens)

ECU accepts originall login and new (used) dash accepts login also.
Where is the catch to adapt this clusters. I cant find any info on DK besides immo has to be in virgin mode.

M73 4B0920900Q ------> VDO 4B0920900J

lupu_sandu
6th September, 2016, 10:30 AM
Key is ok on this car?

amigokola
6th September, 2016, 10:44 AM
Yes car starts on old dash. Originall PIN is acepted by ECU so I know that both PIN's are OK.

amigokola
6th September, 2016, 12:58 PM
I have foult that new dash cant communicate with automatic gearbox. Cant see nowhere to code it to manual. Could it be the issue ?? I unplug the aftermarket radio to still cant adapt dash... Maybe they are not interchangable ??

amigokola
6th September, 2016, 02:35 PM
Talked to someone who repairs clusters proffesional and he told me that some can not adapt :(...
Did you have that situation also ??

exe123
6th September, 2016, 02:58 PM
true but you can adapt manually. No help from me as you use vag eeprom programmer.

yugo45
6th September, 2016, 03:30 PM
try this one to adopt.

amigokola
6th September, 2016, 06:23 PM
Thank's to Yugo's file I was able to adapt dash. Amazing knowledge !!!! Thank's everyone who helped !!!!