Audi a4 2006 rb8 dash new key adaptation

[Mr BLACK]

i can not add a ney key to audi a4 rb8 dash i have pin and cs but i do not know how to precode megamos crypto transponder
pin is 42309 cs: 22 15 6A 2C 44 2A 36 54 01 46 6C A8 ...what i have to write to transponder so that i can adapt key to car i have effi. thanx

[haroutioun]

Hello.
this can done by obd2.

[amigokola]

supervag.com has released RB8 dash TP precode and add to immodata 48 and 48W with help of MiraClone.

[Mr BLACK]

i do not understand what do you mean ?

[Mr BLACK]

id48 can on cs section i have only 7 bytes ...i am lost here ...

[Mr BLACK]

there is a way to precode tp using dash eeprom dump ...?

[lupu_sandu]

No. Only way to add key on this dash is via obd2.

[Klimek]

smok_key maker,avdi _avdi,smok tango,avdi avdi,vas smok avdi tango,ade evo,itd....obd

[Mr BLACK]

i try by obd2 old key is accepted but new transponder is rejected ....i have tools to program key by obd 2 ...but i do not know how to precode transponder i do not know if precoding is reqired for this car ...i have id48 can audi but new transponder is not accepted by car

[Mr BLACK]

i read by obd2 pin code and cs

[haroutioun]

i read by obd2 pin code and mac
Hello.
Dear, the pin code and mac &&& those data you need manual write when you wont to adapt ecu to immo. but about to do dealer or add a key on rb8 dash = immo, so this you need special tool for ready to rb8,for example on avdi insert obd2 connector to car diagnos socket and after from special function you can do without pin code,so avdi its self prepare the transponder and he add the transponder to immo data.but by eeprom or immo data can't done to add transponder.

[Mr BLACK]

so there is no way to add a new transponder to car using pin and cs ..........in this case i use plan B remove transponder from old key and super glue it on antena coil:burnout:

[Klimek]

xcan does in this way that turns the whole, seciurity block,

[mol chaves]

You have to get 6 bits cs from file them calculate The 7th one... After that you can introduce The precoded transp. By obd port ( if The 7 bits cs are not correct... It won,t work).

[Klimek]

depends on the version of the clock, read clocks and versions hours, sometimes 6,7 byte xx, HW........

[amigokola]

http://www.kandm.com.pl/AdvCodeEvo/index.html?supervag.htm
Did not try by myself but this option exists. I assume it reads sec block and add TP directly. Someone tried it ??

[Mr BLACK]

i do not whant do to immo off on edc16u31 or glue transponder on antena coil or use a tool to do the job for me ...i just whant to know what i have to write on transponder cs section to precode id 48 can for this of car ..i have 12 bytes of data from the car and 7 bytes on transponder cs section ...what i have to write in that damn transponder so i can program it by obd2

[Mr BLACK]

and i must lock transponder with car pin code or is accepted unlocked by the car immo

[mikajna]

Mate, you already know that you need 7 (Seven) Bytes...not 12 bytes!!! You need to find correct 7bytes and with those bytes easily prepare transponder for programming, but if you have wrong bytes, transponder will be rejected...

Better find someone to do that job for you...or put ecu eeprom dump to someone calculate you good bytes

[Klimek]

6 ...........XX.....................

[Klimek]

KEY VISTEON 7,VDO 7 NEC 7 RB8 6XX

[MOHCIN2]

HI friends with those 7 BYTE you can make a dealer key locked to your car but you can do a precoded transponder tp25 and add to the car using you pin and tool

[lupu_sandu]

RB8 bosch dash use 12bytes CS

[mikajna]

I dint know that, thanks Lupu you're master :) how can precode transponder with CS 12 bytes?

[Mr BLACK]

...........?

[MOHCIN2]

I THINK with avdi can adapt that key without pin code just precode the chip and add the key
see here post #15 (http://www.digital-kaos.co.uk/forums/showthread.php/280288-What-is-the-status-for-Audi-RB8-cluster-in-Virgin-mode?p=1623654&viewfull=1#post1623654)
http://www.digital-kaos.co.uk/forums/showthread.php/280288-What-is-the-status-for-Audi-RB8-cluster-in-Virgin-mode