BDM bricked in ecu

[Cieniu]

Hi im wrong connection bdm in ecu on the picture
https://s13.postimg.org/u8z859ixj/bdm_wrong_connection.jpg
ecu in car work but im cant programing via bdm :/
maeby somebody have solution on this problem ?
kia sorento 2.5 crdi 170ps edc16c39

[smirnoff_rules]

when you try and read is the error mpc not recognized?

[Cieniu]

yes
ktag error this is same "not power" or "not connection"

[kospoz]

try fgtech or you have not good connection

[Fordprobe]

wrong connection friend. last 4 pins on the left in the photo are not used!!!

[duplikeytor]

Are you sure you are powering the ecu? The connections are fine for mpc

[Cieniu]

i know on this moment connect good (last 4 pin not used) and ktag not see ecu :/ before wrong connection im do it backup

[Fordprobe]

when Ktag powers ecu. and tries to read does the MPC get really hot?

[Cieniu]

on this moment i dont know

[doud77]

Hi,

all edc16, 4 left pins (2 up, 2 down) are not used.

Double check connection diagram

[doud77]

What tool do you use?

[WinWoj]

He said ktag

Did you try some another edc16 read? If you using ktag first time or new connection like via CAN or via BDM is possible that the cable is prepared wrong.. Maybe your bdm adapter no good. I had wrong set wires in CAN cable.. When I changed cables, connection runs.

[budG60]

If the probe was positioned wrong the first time and 12V was placed on the wrong pin, the ecu could be damaged now.

[Mr BLACK]

yes if you put the connector for bdm reading in wrong way ....ecu is bricked

[exe123]

Pin on MPC is internally damaged. You cannot repair it and BDM will never work. Get replacement ECU and I recommend not to try anything via OBD that will fully brick the ECU!

[WinWoj]

If only pad fly away it is possible to solder thin wire to bdm probe/adapter, but nescessery to find path from broken pcb pad...

Edited: i'm not read carefully. As they said, ecu replace.

[Cieniu]

im cannot repair it ?
mpc is demage or pin solder ?
maeby somebody knows how repair it ?

[GabrielMga]

I think MPC is damaged friend :(

[exe123]

MPC damaged. With wrong connection you blow up internal pin inside the MPC. You cannot repair it!

[Cieniu]

i can change mpc after change mpc program bdm this ?

[Mr BLACK]

buy another ecu m8 to change mpc you need special tools and some experience