opel CDC40 Opera pin

[fedez]

Hello Everybody!

Trying to marry new radio, but do not have radio pin.
messege: "headunit safe"
unit: Blaupunkt with 95640

Thanks!!

408176

[nikz]

code 6438............

[fedez]

thanks! but opcom don't accept that...
situation: car came without radio, I have bought used one, previuos was cd70 navi, so am trying to marry with opcom, but code don't work...hmmm

[Raimax]

Try now .......

[fedez]

Thanks, I will try later and report ;)

[shooting]

Thanks, I will try later and report ;)

For pin you will need to post dump from screen....

wbr

[fedez]

I have car pin

[zdravo]

With chinese opcom you will not be able to marry them.
Try with Tech 2 or MDI

Poslano sa mog SM-G900F koristeći Tapatalk

[fedez]

so, I have writed new dump with delivery mode, radio turns on, but always beebing...opcom code accepted, but radio still beeping...

[KierAn20]

With GID and CID screens Chinese Opcom often says "Programming successful" when in reality not a single piece of data was changed :chuncky:

Perhaps post 93c66 dump from the display also. Is this CID (colour) or GID (monochrome) buddy?

[fedez]

With GID and CID screens Chinese Opcom often says "Programming successful" when in reality not a single piece of data was changed :chuncky:

Perhaps post 93c66 dump from the display also. Is this CID (colour) or GID (monochrome) buddy?

CID (colour), ok I will read CID...

[niku202005]

verifiy mid can configuration, configure mid can in display and headunit, then try to activate theft protection from headunit. regards

[fedez]

verifiy mid can configuration, configure mid can in display and headunit, then try to activate theft protection from headunit. regards

Already tried, did not worked.

[fedez]

Here is CID eeprom

409000

[nikz]

code 1154...............

[fedez]

code 1154...............

thanks! but am already have car pin code...am hoping someone can edit eeprom and marry new radio to CID?

[KierAn20]

thanks! but am already have car pin code...am hoping someone can edit eeprom and marry new radio to CID?

Not sure on this, but put this dump in radio first and report what happens please.

[fedez]

Not sure on this, but put this dump in radio first and report what happens please.


WORKS!!! THANK YOU!!!

[vince249]

Hello Fedez. Have you tried using this code to enable security.

[vince249]

Hello Fedez. Sorry that last post was out of sync. Did you use the car pin with KierAn20@s dump to enable security. Thanks.

[fedez]

Hello Fedez. Sorry that last post was out of sync. Did you use the car pin with KierAn20@s dump to enable security. Thanks.

Hi,

just connected radio and all works ;)

[shooting]

Hello Fedez. Sorry that last post was out of sync. Did you use the car pin with KierAn20@s dump to enable security. Thanks.

KierAn20 changed the CD40's code to 1154 and set to paired... simple :)

wbr

[zdravo]

I dont agree with that.
If that is simple every kid will know how to do it ;)

Once again Kieran thank you a lot for helping me with pairing of GID and CD30MP3

Poslano sa mog SM-G900F koristeći Tapatalk

[plasma533]

For the Masters its simple, but for the students some are still learning...

[gixerke]

Hi.

I need tha radio code, cdc40 opera.

Thank you!

B.R.
Gixerke

[Raimax]

---6228---

[gixerke]

Thank you Mate!

---6228---

[fedez]

Hello everybody again!!!

thinking to upgarde my Opel Signum display from GID to SID. Radio is CD30 mp3. Tried program SID eeprom with delivery mode but no luck with chines opcom, get "DISPLAY SAFE" on screen. Maybe someone can edit and marry CID eeprom with radio??? THANKS IN ADVANCE!!!

KierAn20 need your help!

all files here:

[shooting]

Hello everybody again!!!

thinking to upgarde my Opel Signum display from GID to SID. Radio is CD30 mp3. Tried program SID eeprom with delivery mode but no luck with chines opcom, get "DISPLAY SAFE" on screen. Maybe someone can edit and marry CID eeprom with radio??? THANKS IN ADVANCE!!!

KierAn20 need your help!

all files here:

https://files.fm/u/7k9qe6z2#_

Upload here, your link is reported as dangerous

wbr

[fedez]

uploaded files!

[shooting]

uploaded files!

Here is your CID display with code 3961, use Opcom to initialise

wbr

[fedez]

hmm, connected cid, checked measurement it was delivery mode, then activated, 10min was ok, after that "DISPLAY SAFE"....between these 10min status in measurement was "ID N.O.K. yet"

[bank]

hmm, connected cid, checked measurement it was delivery mode, then activated, 10min was ok, after that "DISPLAY SAFE"....

Pls, check DIS for errors. It can contains "Replace ECU" error
I have GID with the same sypthoms, also looses pair after programming

[fedez]

no fault, I.D. OK, but display SAFE...tried second time to flash eeprom but no luch.

[bank]

Display safe shows when display in delivery mode or when display connected with head unit, paired with another display.
What is the status or EHU?

[KierAn20]

Hello everybody again!!!

thinking to upgarde my Opel Signum display from GID to SID. Radio is CD30 mp3. Tried program SID eeprom with delivery mode but no luck with chines opcom, get "DISPLAY SAFE" on screen. Maybe someone can edit and marry CID eeprom with radio??? THANKS IN ADVANCE!!!

KierAn20 need your help!

all files here:

With original 93c66 dump in colour display, put this short edit in radio eeprom. Should just plug & play:

[fedez]

YOU ARE MASTER!!!! Just plug & play!!!! ;) Thank You!!!

[Civic86]

Hello Everybody!

Trying to marry new radio, but do not have radio pin.
CDC 40 Opera
unit: Blaupunkt with 95640 eeprom

Thanks!!

[bank]

Use this dump and pair with code from display

[Civic86]

Use this dump and pair with code from display
DAB Box Error (https://www.vauxhallownersnetwork.co.uk/index.php?threads/dab-box-error.422193/) is everything right? So it should be?

[bank]

Set correct config of can bus in radio (should be the same as for display)

[-=TbMoD=-]

Need Security Code
CDC40 Opera - Delphi/Grundig

thx

[shooting]

Need Security Code
CDC40 Opera - Delphi/Grundig

thx

Dump is corrupt, clean chip and try again, also PIN in Display not radio
(Radio dump only needed for unregistering)

wbr

[-=TbMoD=-]

Sorry my fault. I have now unsoldered the PIC.

[bogege]

Sorry my fault. I have now unsoldered the PIC.

Try this.......................
Use pin in display

[GMXcool]

----------------------------------
Here

[-=TbMoD=-]

great
4001 is correct
Which Programm do you use (Picture) ?

[GMXcool]

Hi
Upa-Usb Script

[somi16v]

Hi.

I need tha radio code, cdc40 opera.

Thank you!

[Gesha Nemirov]

Hi. Try 9163 , 1398

[somi16v]

1398 is pass!
Thanks!

[Mankyro]

Hi,everything worked, they replaced the battery, now the display lights up"DISRLAY SAFE".
Display: Siemens VDO 5WK700093
Radio: CDC40 OPERA

Thank you

[shooting]

Hi,everything worked, they replaced the battery, now the display lights up"DISRLAY SAFE".
Display: Siemens VDO 5WK700093
Radio: CDC40 OPERA

Thank you

You need display dump for pairing,
"Display Safe" means radio has been changed


wbr

[Mankyro]

You need display dump for pairing,
"Display Safe" means radio has been changed


wbr
I posted two dumps, there is a 93c66 dump, thank you.

[shooting]

I posted two dumps, there is a 93c66 dump, thank you.
They're already a matched pair...
They will just work


wbr