VW Polo 2002 Immo EDC15P+ 0281010697

[nezocas]

Hello,

I have read the 24c04, and cleared Immo with ImmoDec 3.2
I leave the original file, and the Immo OFF file... to see if its all OK.
Do I need to make any changes to the car wiring...????

Best regards
Nezocas

[lupu_sandu]

Your off file is bullshit*.
Proper off file attached

[dragon100]

Is it ok Lupu ?

[nezocas]

Your off file is bullshit*.
Proper off file attached

Will try your file and will report bak
Any changes to make in car / wiring / or other..???

Regards

[electrones]

If u have immobox need to disconnect it

Cheers

[nezocas]

Your off file is bullshit*.
Proper off file attached

SOLVED
File worked like a charm ..... THANK?S
NO need to disconnect anything from Immobox or any wire disconnected.
This car does not have ImmoBox, I think Immo is also in dashboard.

Regards
Nezocas

[JCRVideira]

Hi, can you help me with this dump, please?
I need bypass immo.


VW Polo 1.4 TDI
ECU Bosch - 0281010697
Eeprom 24C04

I appreciate your help.
Thank you very much!

[kiszka]

..........

[JCRVideira]

Wow, you are amazing, it was fast! Thank you very much.Tomorrow i will give a feedback.

Thanks again.

[endjov]

Hello colleagues, can anyone help me with correct imo off file.
The car is VW Polo 1.4TDI 2002,Ecu-0281010697/EDC15P+/EEPROM-24c04
Thank you in advance!
Greetings!

[rafal]

post ori file - not after mod

[endjov]

I'm sorry, but this is the file that the car came to me with. I suppose someone before me modified it.
Is it possible to use a file from another ECU?

[rafal]

what is problem with car?
because off done in your ecu................

[cascais]

Here is your file off :D pass in pm

Podes por a confiança password na caixa de mesagens:)



Hi, can you help me with this dump, please?
I need bypass immo.


VW Polo 1.4 TDI
ECU Bosch - 0281010697
Eeprom 24C04

I appreciate your help.
Thank you very much!

[rafal]

if you will write cascais file so have a look for vin......
check this is it same as your car please................

[endjov]

Colleagues, I apologize for the delay, but I need to communicate with clients.
So,the car came to me, it can't start. Also there was no transponder in the key. When trying to start, it starts and immediately goes off. In the ECU of the engine, there are no malfunctions.
There is a malfunction in the cluster-01176 - key 07-00 - signal too low.
Also, the car was systematically left with too low a battery voltage
I am already quite confused and I appreciate your help.

[rafal]

try to find other problem with car...............in ecu off done ok

[brend]

Colleagues, I apologize for the delay, but I need to communicate with clients.
So,the car came to me, it can't start. Also there was no transponder in the key. When trying to start, it starts and immediately goes off. In the ECU of the engine, there are no malfunctions.
There is a malfunction in the cluster-01176 - key 07-00 - signal too low.
Also, the car was systematically left with too low a battery voltage
I am already quite confused and I appreciate your help.




rafal is right off ready done!

Fault code in ecu?.........705663

[Andreastech81]

check exhaust for block maybe ??

[cascais]

rafal my dump was modified from is original dump :D

[rafal]

rafal my dump was modified from is original dump :D

you know better..............as i know is not true............but anyway i do not care

[brend]

I think he not know , his car work with immo off and now car stop work because trable up in another plase and he think problem in immo ......706502


you know better..............as i know is not true............but anyway i do not care