View Full Version : Carrera 911 (997) 93c86 Dash
pandokrator
29th December, 2016, 05:16 PM
hello,
need cluster dump 93LC86
Porsche Carrera S 997
Manual Gearbox
Model : 2007
Dash : vdo 110.080.229/074
Porsche Part : 997 641 115 10 D07
S/W : 1064/33
i think my dump is corrupt
thnx in advance
salkapone
29th December, 2016, 08:45 PM
http://cardamp.ru/view_full_one.php?langs_us=&selectserach=52&id_damp_list=19029 (http://cardamp.ru/index.php?note_ok=&foto_module_ok=&number_view=&fee_ok=&my_ok=&langs_us=&dey_all=1&submit=Ok&model_s=37&type_s=-1&startyear=ALL&module_s=ALL&memory_s=ALL&module_number_s=&damp_type_s=ALL)
pandokrator
29th December, 2016, 09:46 PM
thanks but not exist there any dump for this dash.
bR
pandokrator
3rd January, 2017, 03:49 PM
no one with same car-job-dash ??
bR
bersch8688
3rd January, 2017, 06:28 PM
i done yesterday this car:chuncky:
Here Full EEPROM 93C86 read with FVDI
419026
pandokrator
3rd January, 2017, 10:40 PM
thanks bro :chuncky:
unfortunately my fvdi is not connected from begining of job on this dash,
(fvdi error is "unknown s/w version).
basicaly my eeprom is microchip_98LC86c and not 98C86.
also i have try repair my corrupt dump and now i'm in last step to coding success dash on car.
(cabrio,M/T,electrical spoiler e.t.c)
Two dumn things, one is dash not go to sleep mode when i remove the key and second is
all time give me DTC C141 (bad coding).
i try your file tomorow and i report.
again thanks for your help.
edit: i attach my last mod file that i run now
bigkey
4th January, 2017, 02:41 AM
HAPPY & PROPEROUS NEW YEAR to all Kaos members.
I am from Down Under, quite confident on Asian/US cars but a newbie on European cars, so hope some one can help.
I bought the VVDI2 last couple weeks and just got a job for 2006 Porsche Carrera 911 997.
First time so dont know where to start. Can I do it through OBD or have to be Eeprom job?
Any guide at all is much appreciated.
Thanks in advance
clusters
4th January, 2017, 02:49 AM
Safest way is to read the eeprom out of circuit and save a copy of the original. Then edit the file manually and re-write it or post the file here for correction.
Siemens algo at 0100-011f and 0200-021f
bigkey
4th January, 2017, 02:58 AM
Thank you very much, but for a novice can I push a bit more.
Where is the eeprom ? Do I need to remove the dash and read 93C86 (interpret from the above posts)
Thanks
clusters
4th January, 2017, 03:03 AM
Assuming this is the same..........
bigkey
4th January, 2017, 09:07 AM
Assuming this is the same..........
Thank you very much ...
I will go to the car tomorrow and will report back ...
Much appreciated
pandokrator
4th January, 2017, 09:28 AM
i done yesterday this car:chuncky:
Here Full EEPROM 93C86 read with FVDI
419026
after a test on car not work.
all clusters go to the end and many of dtc.
bR
pandokrator
7th January, 2017, 10:03 PM
can someone check if this ffile are correct
or need some checksum correction?
bR
randomhero
30th June, 2018, 01:16 PM
Hi Pandokrator,
Where you able to solve this?
pandokrator
1st July, 2018, 10:26 AM
Problem it was bad solders on mcu.
That dash is a risk when remove & opening.
bR
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.