Change millage Hunday I10 9S12HY64

[DUSTYDUSTER]

Good Morning Guys ,
please need change millage for this dash : hyundai I10 2012 dashboard with 9S12HY64
millage is average 194K i need 120K
Thank you in advance for your help

[zckariya70]

ur data looks not good mate

[DUSTYDUSTER]

ur data looks not good mate
Thank you for your answer boss , i was not sur but it seems like you say because this dashboard was opened befor me , so i ask you if i ineject another dump from the same dasboerd wil it work ?

[zckariya70]

yes u can ..................... if u need i can help u for the dump

[DUSTYDUSTER]

yes u can ..................... if u need i can help u for the dump
please boss help me with a dump for millage 120k

[zckariya70]

here is the file for u...................

[DUSTYDUSTER]

Hello ,
i did a mistake with this dash , i read it with UUSP as a MOTOROLLA MCU : MC9S12XHY128 , read ok result is the first dump below , but when i tryed to program the dump with 120k the MCU is locked and dont want to read again , i know that the mistake is that i must read it as 9S12HY64 , now i want to know if its any solution or i killed it

[zckariya70]

do u have connection to check the cluster ? if u have check in the table and see the cluster is working r not if it is working u can read and write the dump again the mcu will not lock

[DUSTYDUSTER]

do u have connection to check the cluster ? if u have check in the table and see the cluster is working r not if it is working u can read and write the dump again the mcu will not lock
hello ,
no cluster dont work , i connect it to the car , no odo , no RPM needle

[zckariya70]

write these both files P flash and D flash it will work

[DUSTYDUSTER]

write these both files P flash and D flash it will work
Thank you very much Boss i will try tomorrow and report