Need Beeprog Soic pinout adapter

[einet]

Hello,

How have pinouts for soic adapters for the Beeprog2?


Thanks

[einet]

and no one hav e Soic 8 beeprog pinout?

[Faraday]

this is 1 to 1

[einet]

no is not, some need another adaper.

[Youneselm]

Connect your beeprog to computer, and open elnec software.

1)Type in device that you want.
2)click on device info
3) click on isp connection details tab.

There you see the pinout How to connect clip to isp connection on the side of your beeprog.
You wil see something like this
Br

Press Thank and Reputation If info was helpfull.
Always there to help people[emoji304]

https://uploads.tapatalk-cdn.com/20170204/b534e218838dbcbdfd482d6a4fca2538.jpg

[SunRise]

BeeProg 2 and above use new format adapters with ic's on them. They maintain the count of number of uses to force you to purchase new adapters when the 'lifetime of the zif' has expired. All a scam to make more money.

Guess they trying to turn it all into "subscription" service.

They also force you to use USB 'credit' dongles for some chips - pay per program on those.

Robbing b*stards.

You'd be better off with a BeeProg+ or lower or other programmer where you can use 'standard' 1 to 1 adapters.

[einet]

OK thanks SunRise

This is my problema then!, i Have BeeProg2.

That meen that i bin F*ked.

[Faraday]

WTF they must be joking. BEEPROG was industrial standard for many years and now they do so stupid things.

[SunRise]

Read this

http://www.eevblog.com/forum/reviews/new-beeprog-2-disappointment/

[Faraday]

Token based isp programming very funny.

[roth18]

BEEProg+ works just fine, and cheap from China.

[SunRise]

BEEProg+ works just fine, and cheap from China.

Unfortunately no sellers seem to stock them any more.

[roth18]

I remember there was a post to convert clone to ori, some time ago. I was not interested as I have ori BeeProg+.

[SunRise]

OK thanks SunRise

This is my problema then!, i Have BeeProg2.

That meen that i bin F*ked.

If you don't mind me asking ... how much did you pay for BeeProg2?

And is it a clone or genuine?

[einet]

its a genuine Beeprog2 and paied 1200€

[SunRise]

its a genuine Beeprog2 and paied 1200€

Ouch!

Expensive mistake.

[gopelhu]

Hello,

How have pinouts for soic adapters for the Beeprog2?


Thanks


Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

[Youneselm]

Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

Hi mate,
Could you share all those and post them here?
That wil be so awsome and kindfull.
Thanks in advance mate.[emoji6]
Br

[einet]

Hi
This info help many members, me also.

Try to read 93c46 or 56 not read error on some pins.
35080 not read also
95080 not read erro on pins
95160 not read error on pins

i lost all what i can not read, i use Carprog or UPPAs to read eerpoms

[antwnhszr]

i have BEEPROG 2 original from elnec and is very good and stable programmer.the true is for the adapter's and the ISP programming it's litle coplicatated.....
reard's

[SunRise]

Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

Not correct - as I stated they changed the pricing model to make more $$$/???/<insert currency here>

http://www.ebay.co.uk/itm/BOTTOM-TSOP48-NOR1-Adapter-DIL48-TSOP48-Flash-600mils-pinout-NOR-1-/192051523878?hash=item2cb729b126:g:74MAAOSw2xRYTtM z

Here is the bottom part of one of there TSOP48's. No need for a 48pin - but see the extra block and the eeprom/other chip infront of it. This maintains the count of the number of times used and the elnec software uses this to refuse to work after limit reached.

[gopelhu]

Hi mate,
Could you share all those and post them here?
That wil be so awsome and kindfull.
Thanks in advance mate.[emoji6]
Br

Hi mate,

here are and enjoy !!!!

I removed the attchen files bec nobody give me the thanks or....

Regards, G

[gopelhu]

Not correct - as I stated they changed the pricing model to make more $$$/???/<insert currency here>

http://www.ebay.co.uk/itm/BOTTOM-TSOP48-NOR1-Adapter-DIL48-TSOP48-Flash-600mils-pinout-NOR-1-/192051523878?hash=item2cb729b126:g:74MAAOSw2xRYTtM z

Here is the bottom part of one of there TSOP48's. No need for a 48pin - but see the extra block and the eeprom/other chip infront of it. This maintains the count of the number of times used and the elnec software uses this to refuse to work after limit reached.


Hi

This is only NOR flash :) I hate this NOR flash adapter...

I said the all 27,28,29F flash to pin1-to pin1....and NOT a NOR flash ....

Regards, G

[cubica1]

I can't believe what I'm hear here...I have Beeprog orig from Elnec (ok..it's discontinued tool) ..it is fantastic tool, but now..ISP tokens, soic8 adapters are not 1:1 ?? I just can't believe, what's happen to Elnec, they will loose a lot customers on that way. Sadness.
regards,
cuby

[Youneselm]

Hi mate,

here are and enjoy !!!!

Regards, G

Good work mate!;-)


Press Thank and Reputation If info was helpfull.
Always there to help people[emoji304]

[murat332]

hello friends
i have beeprog2
i have MT29F64G08CABA nand flash
it has some settings, how can it be
thanks

[ricked]

hello friends
i have beeprog2
i have MT29F64G08CABA nand flash
it has some settings, how can it be
thanks

the real question is : what are your trying to do??
as your screenshot is pretty straight forward if you ask me

[murat332]

Thank you very much ricked
problem solved