PDA

View Full Version : Permanent dtc removal



satpt007
20th March, 2017, 11:52 AM
Hi friends,

Is it possable to revome dtc from dump so ecu dont look for them, its the airbag light it is always on, need to take it to mot test.

Thank you so much in advance.

satpt007
20th March, 2017, 11:55 AM
Sorry forgot to say its a renualt vel satis 2.2 dci 2003 model

Autotecno2006
20th March, 2017, 11:55 AM
Make, Model, Year & what exactly is the problem ?

Remember Airbags are there to save Lives !

Regards P

satpt007
20th March, 2017, 11:59 AM
The problem is i have checked all the conectors and put in resistors but the light light always goes on but i need to take it to the mot test very soon. so please if you could help

Thanks

Autotecno2006
20th March, 2017, 12:00 PM
Fault codes !!!!!!!!!!b

Meat-Head
20th March, 2017, 12:01 PM
?

Remember Airbags are there to save Lives !
P

Hardly a hi posted member

would be eaiser to fix the faults, or stuff the bulb up?

satpt007
20th March, 2017, 12:12 PM
If i bust the bulb the service light will still come on.

Meat-Head
20th March, 2017, 12:44 PM
Well stuff the serv light up with crunched up DK thanks buttons, downloads and posts

marmaro
20th March, 2017, 12:50 PM
First identify fault and circut
Then cut the plug and solder the resistor to the circuit with which you have a problem.

Autotecno2006
20th March, 2017, 12:52 PM
Lets try again, What are the fault codes on the system ???????????

satpt007
20th March, 2017, 12:53 PM
Well stuff the serv light up with crunched up DK thanks buttons, downloads and posts

If you have nothing to add then dont say nothing lets stuf the light up so whatever....

satpt007
23rd March, 2017, 01:22 PM
The fault code i cant get to go off is B100B.

dragon100
23rd March, 2017, 01:28 PM
I think so join resistor 2,2 ohm for plug from driver's side airbag and clear errors, then report ...