Daewoo Lanos 2003 1.5 Delphi-Delco 09388019 DLBY immo off?

[Silver740]

Hi to all,

How bypass immo in ecu Delphi-Delco 09388019 DLBY, serv. no. 12201599.
Immo box IM710, DWMC: 96279331
Only emulator?

Thanks,

[vladanr]

is that hybrid?if its hybrid you can do immo off ,but is very hard to unsolder eprom

[Silver740]

thanks, yes hybrid. i can read 95020 on the board, but cant write file back. xprog says buffer error. :(

[vladanr]

we are unsolder eprom and program it on desk ,

[Silver740]

Thanks, thats correct. must desolder.

[satana]

how do you remove the eprom from ecu

[gkogkolos]

Bro,

If you are sure you read it, try to cut 95020 eprom pin number 8 and try to start your engine !!

If this doesnt work, then use my file and your car will start for sure.

Post result here bro !

Press Reputation +1 = Password in PM

regards

[satana]

8 pin is vcc without it the ecu wont work at all:peaceful:
i have tacuma with the same eprom and ecu, have a programmer but i cant desolger it from its fuc..ng ceramics to read write

[gkogkolos]

Its very very hard to desolder the eprom from this ecu, I had took hours one day to clean - desolder it

When you fix it, keep us informed with the way you did it

regards

[Silver740]

i was cut legs, then desolder back. And works. And unplug immobox.

[satana]

desolgered it with the rework station
it should be heated

[durdur]

Hi Gkogkolos,
I've a probleme with immo off on a DEAWOO REZZO. It's a hybrid same a LANOS hybrid.
I make a immo off with immdec3.2 and disconnect immobox but not work.
Ca you send me the pass for this ?
****Lanos_95020 immo off tested gkogkolos****

Thanks in advance

[durdur]

Hello,
no one to help me?

[publiperro]

Bro,

If you are sure you read it, try to cut 95020 eprom pin number 8 and try to start your engine !!

If this doesnt work, then use my file and your car will start for sure.

Post result here bro !

Press Reputation +1 = Password in PM

regards

hi friend,password please,thanks

[rafal]

hi friend,password please,thanks
.........................