iveco daily

[mscauto]

Hi everyone. I need to immo off this van. Iveco 0 281 011 228. The original ecu was burnt and this is the replacement. Can someone immo off this 95640 eeprom please.
Thanks
Dan

[levisdj]

Just swap eeproms if you have the same HW number, via eeprom only virgin sollution, for total immo off read flash and post it here.

[mscauto]

Hi, the ecu label has been worn away and I only have some of the numbers. I cant read the bosch numbers at all. I have tried changing the chips over but it did not work, the injector light was flashing and wouldn't start. I couldn't get a read from the flash using bdm reader. Maybe I will try again. I thought i had read on dk that immo off in eeprom was possible.

[Tzepy]

459070 your off file .. you have to recode injectors after

[mscauto]

Thanks for the file. I will try it today.

[mscauto]

I programmed the ecu and fitted it back to the van today. The van didn't start, it turns over fires and cuts out. The injector light is flashing. I forgot to unplug the immo box before turning the ignition on, is this a problem? I also cant program the injector codes as its got the round diagnostic plug.

[levisdj]

Your ecu is a C8, not C39, my mistake, now write original flash back and put the file I just uploaded into eeprom, tested 100%...good luck!