Citroen C4 Picasso Model 2017 Bsi Delphi

[tony59]

Hello to All

I need Help to put zero into this bsi delphi with 95128

i attached file bsi , original value km 10871

[Dr. Zoidberg]

Hello to All

I need Help to put zero into this bsi delphi with 95128

i attached file bsi , original value km 10871Are you sure of your reading?....
-----------

[hivrich]

Are you sure of your reading?....


try this....




492792

Maybe it will be better

[Dr. Zoidberg]

Maybe it will be betterjejejej , I went the hard way :) .....

[tony59]

Good morning and thank you for your help
sorry for my english, I use the translator
sorry Hivrich, but I have not used your file,
I was not convinced the area on line 2940, because there was a bad cks ,
try to try I preferred one of my solution that was successful,
clearly I want to share with you , I also attached the bsi connections to read the 95128 without
detaching the 2 cards (from smok) original value 10871 changed value 800
dash marelli tft 95160 from 10871 to 800
bsi delphi 95128 from 10871 to 0
regard to all

[drpeter]

Good morning and thank you for your help
sorry for my english, I use the translator
sorry Hivrich, but I have not used your file,
I was not convinced the area on line 2940, because there was a bad cks ,
try to try I preferred one of my solution that was successful,
clearly I want to share with you , I also attached the bsi connections to read the 95128 without
detaching the 2 cards (from smok) original value 10871 changed value 800
dash marelli tft 95160 from 10871 to 800
bsi delphi 95128 from 10871 to 0
regard to allSo this is working? Strange, the cs in the bsi is wrong, at 0km the cs is 6BE9, not 0000!

[tony59]

strange but true, I knew of that second cks, but I did not know how to calculate, in fact mine was an attempt .... went well
I have covered a 2 km and the speedometer works well

[drpeter]

strange but true, I knew of that second cks, but I did not know how to calculate, in fact mine was an attempt .... went well
I have covered a 2 km and the speedometer works wellok my scripts calculate the cs but i think it is not needed then, thanks. I never had this car so could not test it.

[vageric]

ok my scripts calculate the cs but i think it is not needed then, thanks. I never had this car so could not test it.

i think because the cs is not correct it auto make mileage 0km and it take the dash mileage!

[Spike999]

499954Hi, tried your pin out this morning but could not get coms. How did you separate the PCB's?
Many thanks Vaughan

[teerak2uk]

Hello to All

I need Help to put zero into this bsi delphi with 95128

i attached file bsi , original value km 10871Did you have to split the board to get access to the eeprom?

[adjee]

499954Hi, tried your pin out this morning but could not get coms. How did you separate the PCB's?
Many thanks Vaughan


hi friend
can you help me with pinout of delphi bsi

thanks

[Cllau]

your answer is in post #5....595458:captain:

[proteus]

Hello

I need Help to put zero into this bsi delphi with 95128

i attached file bsi , original value km 47400

[LINKUNCOOL]

THANKS FOR THE INFORMACION , I WILL TRY YOUR PINOUT .