>>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

[nazz2]

Martin, AlekN has said that in case of dongle error, go to the online, select the car manually, go to programming, load the backup and wait for the flash to be written back to the car, what is this back up? from the bcm ?, but you have managed to fix it by renewing the air bag? so which way is best or recommended? Thanks

[rapidlocksmiths]

i suspect on the ones i did it wasnt the internal dongal error but instead was a doner airbag unit containing wrong vin that stopped car running and renewing the airbag unit with the correct data solved the ones i had.

alot of cheap garages when theres an airbag or abs unit issue they replace with a 2nd hand airbag or abs unit and van runs fine , the problem comes when system reflashes during key programming and it sees the missmatched units with different vin , renewing these with correct data seems to get over this , so a different error than the uch error i suspect.

though the member i spoke to on here had similar issue , key programming failed and after remote worked but vehicle a non start ,he kept reading wrong pin from there in , he used another tool which read the correct pin and then was able to reset with avdi he said and he only had to reset airbag unit but needed correct pin to do this , so i suspect just an airbag unit issue on his

[nazz2]

Got you. so scan with avdi,vin check abs+airbag, then if matched carry on with programming the key. if one unit vin not matched, renew then match, then program the old or new key? i guess the writing the back up mentioned by Alek must be from bsi then, if not mistaken. Thanks

[TERMINATOR1000]

Hi, this is exactly what I am talking about. A backup of the UCH is saved in the log folder for renault.
1. No, our developer is 100% adamant about that. He said that people copy his functionality, break cars and the customers should go to the "developer" who gave them the tool for help. He refuses to assist.
.
Hello
it's not an dongle Error this situation , it's boot mode BCM , car is totally dead !
"dongle error" is an wong PIN code after use ZEDFULL last year , tool made BCM with another PIN code than ECU !!!
for repair "dongle error" we need BCM in virgin state + ECU PIN code , if add key Renault.net resolve it , if AKL big money lose to come ...
AVDI is not the Messiah ! If ZEDFULL or AUTEL kill the car .... the car is killed definitely

[honda1200]

2016 Citroen Berlingo, can i programe/ exchange BSI with New unit from Peugeot with avdi online or offline?

cheers

[habbyb]

hello everybody , add key with succes amarok 2019 dash uds can in service mod ok cip mqb , please say remote control it is programmed automatically there is no programmable section for remote ??? mine is NOT the right one cheap chinese , part number oem remote is 7E0837202BP , Do you have any idea where I can find it?

[honda1200]

hello everybody , add key with succes amarok 2019 dash uds can in service mod ok cip mqb , please say remote control it is programmed automatically there is no programmable section for remote ??? mine is NOT the right one cheap chinese , part number oem remote is 7E0837202BP , Do you have any idea where I can find it?


i believe its remote key from dealer and program with odis if you need working remote for 2019-

[lush29]

2016 Citroen Berlingo, can i programe/ exchange BSI with New unit from Peugeot with avdi online or offline?

cheersI never did new units , but second hand yes...If old unit still alive yes by obd ,offline.

Sent from my Pixel 6 Pro using Tapatalk

[whiskeyman]

Hello
it's not an dongle Error this situation , it's boot mode BCM , car is totally dead !
"dongle error" is an wong PIN code after use ZEDFULL last year , tool made BCM with another PIN code than ECU !!!
for repair "dongle error" we need BCM in virgin state + ECU PIN code , if add key Renault.net resolve it , if AKL big money lose to come ...
AVDI is not the Messiah ! If ZEDFULL or AUTEL kill the car .... the car is killed definitely

this is what i have been saying all along
avdi will not repair from the tests i have tried
unless there is something i am missing???

[habbyb]

i believe its remote key from dealer and program with odis if you need working remote for 2019-


hello everybody , add key with succes amarok 2019 dash uds can in service mod ok cip mqb , please say remote control it is programmed automatically there is no programmable section for remote


Hello Alek , please help me with the answer if I find the right one remote is posible programmed automatically because avdi can program the chip without problems , waiting for your answer , thanks

[rapidlocksmiths]

indeed , it shows that theres a big difference between a vehicle rendered a non runner due to a doner airbag unit and a vehicle bricked by the tool used during key programming and pin reading .

so at present abrites looks to be the safest tool to use as at least generates a back up file should the worst happen.

[AlekN]

I have had this on a G class from around 2008-2010... It happened at the 25th attempt - virgin, personalize, write coding, activate. This is 100% a defect of the cars and not on our end. Tested it for sure.

changing vin with the help of das manager (avdi) in mercedes ezs eis, I tried all the ways: I make a virgin, I write the coding, then personalization. In the two that I tried, the VIN remained as it was, not what I saved the coding and I'm trying to write from the coding or manual input. In eis w164 I easily replaced vin with vvdi and w211 with xprog in eeprom

[AlekN]

We determined that 2018 is a rough cutt off point for these cars.

Better start fixing subaru which ones are not working any time on akl :)

[AlekN]

Allowed and not allowed is nothing to do with that. Everyone is allowed :D. Trafic 3 is the same as SMART 453 and Twingo 3 for sure this is how to do it:
https://www.youtube.com/watch?v=5-wgcT2Lrwo&t=1s


Hi Alek N, would you kindly find out from sales which licences we need to do the Traffic 3? because on RR024 description,it says module renewal, but you say it is for key programming, so is RR024+RR019 be enough for programming and fixing Traffic 3? i have RR015, don't have RR014 , or if sales talk its not allowed here, can i ask the same question from sales? Thanks

[AlekN]

In short - we can repair bricked UCH with a different tool but our developer is against it so we cannot.

AlekN

the question was that if someone else has bricked one of these traffic or vivaro vehicles using a different tool other than abrites , can avdi fix this ? as in your desciption you say to select car manually , go to programming , load the back up and wait for the flash to be written back to the car , however if someone else with a different tool has caused this avdi users do not have a back up file to load .

so from your answer i can only assume the answer is no avdi cannot repair this if caused by a different tool , only if caused by avdi where a back up is available .

though ive been to a couple where the remote was working and the vehicle not starting , where renewing the airbag solved the issue , im assuming that this may have been a different issue and was caused due to doner airbag unit .

another member here had same issue , managed to read correct pin with another tool and renew airbag with avdi to resolve issue .

[AlekN]

Yes, Online software and BSI exchange.


2016 Citroen Berlingo, can i programe/ exchange BSI with New unit from Peugeot with avdi online or offline?

cheers

[AlekN]

Here is the way to do it:
https://www.youtube.com/watch?v=MqnGltN9DF4


hello everybody , add key with succes amarok 2019 dash uds can in service mod ok cip mqb , please say remote control it is programmed automatically there is no programmable section for remote ??? mine is NOT the right one cheap chinese , part number oem remote is 7E0837202BP , Do you have any idea where I can find it?

[rapidlocksmiths]

In short - we can repair bricked UCH with a different tool but our developer is against it so we cannot.

why would the developer be against It , surely the more abrites users can repair the more users will buy the licence to do so , alot of these are getting bricked so its a good area for all of us ? sorry i dont understand the developer being against something that could be so important to abrites users .

but hey ho , if the developer says no its obviously no.

[gttuning]

In short - we can repair bricked UCH with a different tool but our developer is against it so we cannot.Is this developer alright??

So there is a way of repairing broken UCH but developer don't want to have this in the software..??..
Why not?? Whats wrong with him?

Again its advantage for avdi owners to have this function..
Who cares that guy with autel broke uch??
As long i can drive down fix it and charge good money why stop this?

I completely don't understand that.

Sent from my SM-G965F using Tapatalk

[gttuning]

Could someone add a option to online software "update later" ?

Sent from my SM-G965F using Tapatalk

[habbyb]

Here is the way to do it:
https://www.youtube.com/watch?v=MqnGltN9DF4

Thanks for the reply AlekN , key was added on obd cip mqb with succes my question was about the remote control if it can be programmed automatically .

[garagetech007]

My avdi doesn’t work on opel instrument clusters . Pulling pin replacement or mileage is an issue. Not had this interface since long. Any suggestions

[rapidlocksmiths]

i had to have a replacement avdi when i had same issue , wouldnt work at all on alot of vauxhall/opel , sent logs and had to exchange and buy new avdi unit . start by contacting your distributor , send log files from the failures and they can pinpoint the issue and know if your avdi needs repair , replacing or just new software links .

[gttuning]

My avdi doesn’t work on opel instrument clusters . Pulling pin replacement or mileage is an issue. Not had this interface since long. Any suggestionsWhat Opel ??
You might talk about 2022 or 1998 so witch one is it.?



Sent from my SM-G965F using Tapatalk

[garagetech007]

What Opel ??
You might talk about 2022 or 1998 so witch one is it.?



Sent from my SM-G965F using Tapatalk

Opel instrument clusters only all makes and models

[rapidlocksmiths]

have you contacted support via your distributor and sent the log files off of the failures ? from these they can tell you exactly what is wrong and what is needed

what licences do you have for opel ?

what is happening , avdi not connecting to the vehicles ?

if you purchased new and not over a year old then your avdi will still be under warranty and you have ams and support while in warranty , so id be straight on to distributor and send log files as they are best placed to assist you and resolve this .

[garagetech007]

have you contacted support via your distributor and sent the log files off of the failures ? from these they can tell you exactly what is wrong and what is needed

what licences do you have for opel ?

what is happening , avdi not connecting to the vehicles ?

if you purchased new and not over a year old then your avdi will still be under warranty and you have ams and support while in warranty , so id be straight on to distributor and send log files as they are best placed to assist you and resolve this .

Thx Will do

[AlekN]

He really does not like it because other companies use his method and brick cars which he then has to fix. Please let us know via tickets, emails or what have you and I will arrange for him to fix each of the ones you need.

why would the developer be against It , surely the more abrites users can repair the more users will buy the licence to do so , alot of these are getting bricked so its a good area for all of us ? sorry i dont understand the developer being against something that could be so important to abrites users .

but hey ho , if the developer says no its obviously no.

[AlekN]

I know about that and have put it up for discussion.


Could someone add a option to online software "update later" ?

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

just seen the video on restoring the bsi on 3008 , good video and clearly shown all steps to take , will help many , good job
https://www.youtube.com/watch?v=Vppa0LBF7Pc

[habbyb]

hello , someone tried to do it vw mqb platform in all key lost situation ???

[AlekN]

DONGLE ERROR UPDATE!!!

Hello guys, I spoke to the developers for Renault today and we had a chance to discuss the Dongle error as per your question. There is a situation which arises for the Trafic III and Nissan NV300. It says "Dongle error" when doing all keys lost.
The Culprit there is the AIRBAG module. During the procedure for key programming it goes off, on and sometimes goes int this DONGLE ERROR.
Now there is a way we suggest you fix dongle error:
- Go to the RENEWAL function (RR014) required
- Select AIRBAG
- Select TRAFIC III
- You will be able to see the "DONGLE RESET" button there.
This is a thing from the cars and is fixed as described.
Please let me know in case of issues. I will start looking for a car for video but UK cars are not too common here because if the RHD.
Thank you.

[rapidlocksmiths]

DONGLE ERROR UPDATE!!!

Hello guys, I spoke to the developers for Renault today and we had a chance to discuss the Dongle error as per your question. There is a situation which arises for the Trafic III and Nissan NV300. It says "Dongle error" when doing all keys lost.
The Culprit there is the AIRBAG module. During the procedure for key programming it goes off, on and sometimes goes int this DONGLE ERROR.
Now there is a way we suggest you fix dongle error:
- Go to the RENEWAL function (RR014) required
- Select AIRBAG
- Select TRAFIC III
- You will be able to see the "DONGLE RESET" button there.
This is a thing from the cars and is fixed as described.
Please let me know in case of issues. I will start looking for a car for video but UK cars are not too common here because if the RHD.
Thank you.

that makes sense , as i knew one of the jobs stating dongle error i managed to fix for a 3rd party who had killed it with another tool was when he did all keys lost , i was certain of it , and i had to renew airbag to fix this , i was doubting myself and my memory for a while there , thought i was going mad .

the same with the member that i chatted to here with his , he also had killed it all keys lost with another tool and had to renew airbag unit to fix things .

thank you for clarifying this and confirm im not losing my marbles .

[davorOS]

Hi

Any one try new AVDI key programmig for Mercedes Truck MN031?

easy like cars on heavy ?

ALekN Maybe a video if possible ?

thank you

[drugowaz]

Video already youtube. But total packadge has not friendly price as also gen 2 protag nedded.

[rapidlocksmiths]

video already on avdi fan https://www.youtube.com/watch?v=CScrL3YTDVA

[davorOS]

yes
I found video over weekend
Yes price is high but.....

thank you

[autochei]

logan 3 2021 year i try tp program new key but avdi say unsuported version i have all licence

i have succes with dacia springer 2022

[nazz2]

Hi Alek, tried to pull pin code to do spare key on a late 2009 Skoda Fabia 1.2, tried manual and wizard, but it failed, not sure about the correct message at one stage something like ecu... blocked? can i leave ignition on for 1 hour and try again? can send log ,if required, thanks

[isma123]

why would the developer be against It , surely the more abrites users can repair the more users will buy the licence to do so , alot of these are getting bricked so its a good area for all of us ? sorry i dont understand the developer being against something that could be so important to abrites users .

but hey ho , if the developer says no its obviously no.


totally agree ,
avdi is here to solve also svdi fvdi smok lonsdor problemes

[hollanda]

Hi Alek, tried to pull pin code to do spare key on a late 2009 Skoda Fabia 1.2, tried manual and wizard, but it failed, not sure about the correct message at one stage something like ecu... blocked? can i leave ignition on for 1 hour and try again? can send log ,if required, thanks

This cluster with Magnetti Marreli cluster? model before PQ model… its like Vw Polo 9N system
best to do is read mcu and add direct key. Write new data back and car is running fine.

[rapidlocksmiths]

AlekN

congratulations on the release of BN014 , indeed a first , though it does throw up a burning question as the new licence also includes all E series models using cas3 and cas 3+ , which as you will be aware are the functions of BN010 which is still sold at £1305.

so my question is that as BN014 contains the BN010 functions many of us already own having paid for BN010 , is their an upgrade price for existing owners of BN010 and BN012 ?

as it seems another imbalance if a new buyer can get the functions of BN010 free for less than you currently sell BN010 for and again for existing users another dead investment .

i ask as theres no mention of an upgrade price in todays release on pre order , im sure this isnt another occasion that existing customers are trampled upon , or is it.

[qwojtus]

I think BN014 is very interesting and unique function and I wish Abrites to keep it for years.

BMW E series AKL via OBD???

Most tools have been doing this way for years, I can't remember when I had to remove anything to make AKL for E. I believe Abrites is doing the same way all others.

What's unique about it?

[gttuning]

AlekN

congratulations on the release of BN014 , indeed a first , though it does throw up a burning question as the new licence also includes all E series models using cas3 and cas 3+ , which as you will be aware are the functions of BN010 which is still sold at £1305.

so my question is that as BN014 contains the BN010 functions many of us already own having paid for BN010 , is their an upgrade price for existing owners of BN010 and BN012 ?

as it seems another imbalance if a new buyer can get the functions of BN010 free for less than you currently sell BN010 for and again for existing users another dead investment .

i ask as theres no mention of an upgrade price in todays release on pre order , im sure this isnt another occasion that existing customers are trampled upon , or is it.Did you check this out.https://uploads.tapatalk-cdn.com/20221122/6127dc94bda918c0512f446653cafc6b.jpg

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

i missed that when i checked , thats actually a very good upgrade deal .

i got it totally wrong so my humble appologies for presuming the worst , im actually very happy with these upgrades , seems abrites may just be listening after all , excellent news and again AlekN congratulations on BN014 , its a very good deal , keep up the good work.

[AlekN]

I did, the video is out, the user manual is complete.
https://www.youtube.com/watch?v=CScrL3YTDVA
https://abrites.com/media/user_manuals/html/abrites-diagnostics-for-mercedes-trucks-user-manual/index.html?v=1668617092


Hi

Any one try new AVDI key programmig for Mercedes Truck MN031?

easy like cars on heavy ?

ALekN Maybe a video if possible ?

thank you

[AlekN]

Great to hear about the SPRING. Please tell me about the Logan - can you describe in an email to support@abrites.com to get it added with the developers.


logan 3 2021 year i try tp program new key but avdi say unsuported version i have all licence

i have succes with dacia springer 2022

[AlekN]

EDIT: Updates are available from basicall all existing functions to BN014. ASK SALES FOR PRICES.

I agree, ask the sales@abrites.com team, they ought to have a vision of how to sell the upgrade, if one is available. We are waiting for a car to do a video this week.


AlekN

congratulations on the release of BN014 , indeed a first , though it does throw up a burning question as the new licence also includes all E series models using cas3 and cas 3+ , which as you will be aware are the functions of BN010 which is still sold at £1305.

so my question is that as BN014 contains the BN010 functions many of us already own having paid for BN010 , is their an upgrade price for existing owners of BN010 and BN012 ?

as it seems another imbalance if a new buyer can get the functions of BN010 free for less than you currently sell BN010 for and again for existing users another dead investment .

i ask as theres no mention of an upgrade price in todays release on pre order , im sure this isnt another occasion that existing customers are trampled upon , or is it.

[AlekN]

We have been doing this for years and years. BN010+ BN012 for ISN reading will get you
BMW CAS up to 3+ by OBD.

I think BN014 is very interesting and unique function and I wish Abrites to keep it for years.

BMW E series AKL via OBD???

Most tools have been doing this way for years, I can't remember when I had to remove anything to make AKL for E. I believe Abrites is doing the same way all others.

What's unique about it?

[habbyb]

AlekN

congratulations on the release of BN014 , indeed a first , though it does throw up a burning question as the new licence also includes all E series models using cas3 and cas 3+ , which as you will be aware are the functions of BN010 which is still sold at £1305.

so my question is that as BN014 contains the BN010 functions many of us already own having paid for BN010 , is their an upgrade price for existing owners of BN010 and BN012 ?

as it seems another imbalance if a new buyer can get the functions of BN010 free for less than you currently sell BN010 for and again for existing users another dead investment .

i ask as theres no mention of an upgrade price in todays release on pre order , im sure this isnt another occasion that existing customers are trampled upon , or is it.

Hello , you are perfectly right , the same shit starts again they made it for a lot of money , intentional , they could do for the owners bn 10-12 another price .

[habbyb]

Hello , yes sory abrites team ,i missed that when i checked , thats actually a very good upgrade deal for bmw .

[garagetech007]

Is avdi able to code a new kvm in a 2017 landrover discovery?

[lupu_sandu]

Abrites shop message:

Product is not available for purchase right now due to technical difficulties.
Please, try again later.
We apologise for the inconvenience.

In general i preffer not to enter in endless conversations with anyone, but Abrites company have a long history to not a give a sh"t about existing customers.
1st in the world they anounce fuse relay cable a revolutionary method to extract pass more quick. Great news, 200e+VAT and a sh"t more on shipping.
Over 2 months, a new revolutionary break-up box apear, same functionalitty , still 200e+VAT (and you guess, same shipping fee). Existing customers who purchased fuse relay some discount? Ha.
After few years passed, ECUPROG apear, and again another big surprise for us: you cannot use old break-up box anymore because of old FW, need new one.
Well you figured up untill now, same 200e+VAT(discount for old customers? C'mon we are talking about big Abrites Company. What is that?).
Now we are going same path with Protag2. Who wants to bet that after few release, protag1 will not have same functionality same as protag2 and we are force to buy'it.

My 2 cents.

PS: Break-up box = Distribution box.
PPS:

I'm still waitting for AVDI to be able to read immodata from Audi A3 Micronas 2011-2012.

[mjoesen]

Update from BN013 to BN014 cost €400.

[rapidlocksmiths]

bn013 to bn014 400euro
bn010 to bn014 450 euro
bn006&bn008 to bn014 450 euro

also bn010 to bn013 400 euro

not bad upgrade deals at all really , looks like im buying quite a bit after all in xmas promo if there is one

[Antonio266]

Done Mileage correction on 2 Renault Captur II in the last 3 days.
Both worked perfect with the new RR025 license and CB021 cable (IC+ABS recalibrated).

[autoTkey]

Great to hear about the SPRING. Please tell me about the Logan - can you describe in an email to support@abrites.com to get it added with the developers.

Could you point which software licenses are needed to do the Spring? It's a bit of a mess in the license viewer for Renault right now...

[TERMINATOR1000]

Done Mileage correction on 2 Renault Captur II in the last 3 days.
Both worked perfect with the new RR025 license and CB021 cable (IC+ABS recalibrated).

You change 2 dashboars in 3 day !!!! Or you F.U.C.K used car customers ???
Perfect example of ILLEGAL USE tools , after you will cry when ABRITES communicates log files to INTERPOL

[Antonio266]

You change 2 dashboars in 3 day !!!! Or you F.U.C.K used car customers ???
Perfect example of ILLEGAL USE tools , after you will cry when ABRITES communicates log files to INTERPOL
Mate, honestly you're really talking without knowing anything, who are you to talk like that to me? Do you know me or maybe do I know you?
I had these two Captur II since one month here, I've been able to finish them now that I've bought license from AVDI.
The first one is a stolen car, then found by the customer, but with ECU, UCH, NAVI and IC missing from the car, the customer bought an used starting kit and used IC, due to the 5-6 months wait for the parts estimated by Renault Dealer.
The second Captur II has a defective ABS (diagnosticated by Renault Dealer) and the customer again chosen to fit an used ABS, here on DK you won't find 'Dealers', here people needs to work also with USED PARTS, keep that in mind.
So on both car I've recalibrates the Dash and ABS, and I've given back the cars to customers after almost one moth I had them here, and given a feedback to the people here on Forum.

Don't ever try again to talk like that to me, talking about illegal use and things like that, without knowing the full story or the person you're talking to. You're very disrespectful.

[TERMINATOR1000]

:yada:yes sir ! Sorry to offence you ... Really !

[gttuning]

What is people about some avdi logs ..interpol ??
I missed something?


Sent from my SM-G965F using Tapatalk

[TERMINATOR1000]

What is people about some avdi logs ..interpol ??
I missed something?


Sent from my SM-G965F using Tapatalk

U.C.O in 3 letters , servers & IP spoking like NEVER !
I will shock ?
Illegal use can kill ABRITES & honest customers too , publishing on forum these functions is not smart , on Youtube no smartest !!!!
It's no the subject , all AVDI functions work fine , big discount on HW today , best price than chinese S.H.I.T !

[autoTkey]

Could you point which software licenses are needed to do the Spring? It's a bit of a mess in the license viewer for Renault right now...

Anyone?

Also I noticed with last update from 25.11.2022 there's a bug with Windows 7. It gives error in ftd2xx.dll.
So I copied the ftd2xx.dll from the previous version and it seems to work. I hope there are no problems when working on a car...
(I also replaced FTChipID.dll just in case.)

[vageric]

anyone saw the video from the BMW key adding through obd?

if i see correct then the car has a valid key allready and is ignation on.

so this is no AKL situation.

AlekN correct me if im wrong pls! or anyone els.

2017 BMW F16 (equipped with a BDC module) All Keys Lost Key Programming Fully by OBDII - YouTube (https://www.youtube.com/watch?v=7miixUl3l9s)

[AlekN]

Yes, this is a windows issue, microsoft do not support Win 7 and newer drivers screw with it. Please find the dll attached, paste it into your instalation directory.


Anyone?

Also I noticed with last update from 25.11.2022 there's a bug with Windows 7. It gives error in ftd2xx.dll.
So I copied the ftd2xx.dll from the previous version and it seems to work. I hope there are no problems when working on a car...
(I also replaced FTChipID.dll just in case.)

[AlekN]

Hello, I am correcting you, the car does have a working key, 2 for that matter, it belongs to a friend of mine. The keys are not in the car for the test, Abrites diagnostics for BMW online forces ignition ON. As you saw the ISN is fully extracted. This procedure was also demonstrated live in Italy.
What is the point of the comment? Just out of cuiosity - What would the purpouse of faking this video be? Lie to you and get slaughtered on DK, Social media, emails, tickets, phone? Not really something I would be looking forward to. The videos are made to help people. Of course they serve their promotional purpouse as well but "HOW TO" is the main drive. I created the Youtube channel so that I could help people. If we fake something we would get minced by you guys so this would not be something we would do.
Best regards,
Alek


anyone saw the video from the BMW key adding through obd?

if i see correct then the car has a valid key allready and is ignation on.

so this is no AKL situation.

AlekN correct me if im wrong pls! or anyone els.

2017 BMW F16 (equipped with a BDC module) All Keys Lost Key Programming Fully by OBDII - YouTube (https://www.youtube.com/watch?v=7miixUl3l9s)

[AlekN]

One more thing. CB015, the ENET cable you see in the video is still not available for sale. For the moment you can use OBD, the only difference is time, with OBD the procedure takes 30 minutes, with ENET - less than 10. Here is the text from the manual we are currently writing:
Connections.
When using the Abrites Diagnostics for BMW online software to program keys to BDC cars of the F Series you can use two different connection options:
1. CB015 ENET (Ethernet to OBD) Cable.
When you use this cable, you can connect the ENET cable directly into your PC using the specific LAN port supplied to it. Please make sure you have your AVDI connected to your PC as well and also make sure that the AVDI is not connected to the vehicle’s OBD because you are going to use the CB015 ENET cable for that purpose.
2. OBD2 cable CB100 or CB106.
When you use this connection simply connect your AVDI to your computer and connect the CB106/ 100 to it on one end and to the vehicle on the other.
NB! Please make sure to have a stable power supply going to the vehicle for the duration of this procedure.
Protag is also required to be connected to the PC

[vageric]

Hello, I am correcting you, the car does have a working key, 2 for that matter, it belongs to a friend of mine. The keys are not in the car for the test, Abrites diagnostics for BMW online forces ignition ON. As you saw the ISN is fully extracted. This procedure was also demonstrated live in Italy.
What is the point of the comment? Just out of cuiosity - What would the purpouse of faking this video be? Lie to you and get slaughtered on DK, Social media, emails, tickets, phone? Not really something I would be looking forward to. The videos are made to help people. Of course they serve their promotional purpouse as well but "HOW TO" is the main drive. I created the Youtube channel so that I could help people. If we fake something we would get minced by you guys so this would not be something we would do.
Best regards,
Alek

AlekN, the comment was because i can see in the video on 0:51 till 1:16 that the ignation is on during connecting the Abrites devices.
so how can it be that the Abrites online is forcing the ignation?
i dont saying that you are faking the video but i only saying that the ignation is allready on, so it cant be AKL situation (mine thinking).
that is why i asking if im correct or not.

also im not attacking you or the company. again i just asking if im seeing it correct or not.
i dont know how the program work so i cant just say that the video is fake.

im sorry if i have offend you. not mine intention.
hope you understand what im trying to say and where im comming from.

regardless im gonna order the software. just so you know.

[gttuning]

AlekN, the comment was because i can see in the video on 0:51 till 1:16 that the ignation is on during connecting the Abrites devices.
so how can it be that the Abrites online is forcing the ignation?
i dont saying that you are faking the video but i only saying that the ignation is allready on, so it cant be AKL situation (mine thinking).
that is why i asking if im correct or not.

also im not attacking you or the company. again i just asking if im seeing it correct or not.
i dont know how the program work so i cant just say that the video is fake.

im sorry if i have offend you. not mine intention.
hope you understand what im trying to say and where im comming from.

regardless im gonna order the software. just so you know.Many scaners can force ignition on bmw cars while you programing ..etc..

Sent from my SM-G965F using Tapatalk

[habbyb]

One more thing. CB015, the ENET cable you see in the video is still not available for sale. For the moment you can use OBD, the only difference is time, with OBD the procedure takes 30 minutes, with ENET - less than 10. Here is the text from the manual we are currently writing:
Connections.
When using the Abrites Diagnostics for BMW online software to program keys to BDC cars of the F Series you can use two different connection options:
1. CB015 ENET (Ethernet to OBD) Cable.
When you use this cable, you can connect the ENET cable directly into your PC using the specific LAN port supplied to it. Please make sure you have your AVDI connected to your PC as well and also make sure that the AVDI is not connected to the vehicle’s OBD because you are going to use the CB015 ENET cable for that purpose.
2. OBD2 cable CB100 or CB106.
When you use this connection simply connect your AVDI to your computer and connect the CB106/ 100 to it on one end and to the vehicle on the other.
NB! Please make sure to have a stable power supply going to the vehicle for the duration of this procedure.
Protag is also required to be connected to the PC

Hello AlekN , thanks , this is not a problem we can buy it I already found it I receive it today , succes .

[mjoesen]

Does CB015 ENET cable only fit cars with BDC or can it speed up FEM and CAS4 programming to?

[lush29]

just seen the video on restoring the bsi on 3008 , good video and clearly shown all steps to take , will help many , good job
https://www.youtube.com/watch?v=Vppa0LBF7PcGuys have this problem on an Berlingo JCI BSI 2014. Procedure was done offline. Trying to recover the filles online/offline but is telling me checksum error any advice please? Thanks https://uploads.tapatalk-cdn.com/20221130/322abab11a912bed667f6f15dc8225fb.jpg

Sent from my Pixel 6 Pro using Tapatalk

[autoTkey]

That's because the backup is corrupted and you can't fix it (this is the weak part in the AVDI recover procedure...). You must check the version of your BSI through diagnostics and find the same flash backup here from the forum.
Important part is to upload only the same version for your BSI. If you upload the wrong version, then the BSI config (eeprom) will be deleted and you will get more problems on your head.

[lush29]

That's because the backup is corrupted and you can't fix it (this is the weak part in the AVDI recover procedure...). You must check the version of your BSI through diagnostics and find the same flash backup here from the forum.
Important part is to upload only the same version for your BSI. If you upload the wrong version, then the BSI config (eeprom) will be deleted and you will get more problems on your head.Appreciate that thank you .

Sent from my Pixel 6 Pro using Tapatalk

[gttuning]

Appreciate that thank you .

Sent from my Pixel 6 Pro using TapatalkWhat r you trying to do with this van??

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

check your log files , you will find the flash file and flash signature there , then either from support or from this forum you can get a clean flash file

[lush29]

What r you trying to do with this van??

Sent from my SM-G965F using Tapatalk AKL. Problem is solved by one of our DK members here .
Different dump fixed

Sent from my Pixel 6 Pro using Tapatalk

[rapidlocksmiths]

it would help others if you state how you fixed it , the procedure you followed as you wont be the last person this happens to and i bet plenty here wont know where plenty of others will.

[lush29]

it would help others if you state how you fixed it , the procedure you followed as you wont be the last person this happens to and i bet plenty here wont know where plenty of others will.Different dump done the job

Sent from my Pixel 6 Pro using Tapatalk

[gttuning]

Different dump done the job

Sent from my Pixel 6 Pro using TapatalkCan you explain what have you done that killed bsi .

I done I imagine over 500 of these and not one problem...

So I'm very interested what happen to you ?


Sent from my SM-G965F using Tapatalk

[lush29]

Can you explain what have you done that killed bsi .

I done I imagine over 500 of these and not one problem...

So I'm very interested what happen to you ?


Sent from my SM-G965F using TapatalkI did loads over the years also. Never ever had problems and I have a big list with flashes there which is been done with AVDI, but this one read it all good untill verification and then all stopped , dead , just stopped at the verification ,booster on the battery also. Never pulled the pin just at the verification stopped. Tool automatically saved the backup.

Sent from my Pixel 6 Pro using Tapatalk

[davorOS]

I had same yesterday but on Captur,read flash with online sw and after read all stop on verification,left HFM in bootloader
lucky AVDI backup dump so I just reprograme with same flash

it is done with new update I receive same day...


I did loads over the years also. Never ever had problems and I have a big list with flashes there which is been done with AVDI, but this one read it all good untill verification and then all stopped , dead , just stopped at the verification ,booster on the battery also. Never pulled the pin just at the verification stopped. Tool automatically saved the backup.

Sent from my Pixel 6 Pro using Tapatalk

[TERMINATOR1000]

Guys have this problem on an Berlingo JCI BSI 2014. Procedure was done offline. Trying to recover the filles online/offline but is telling me checksum error any advice please? Thanks https://uploads.tapatalk-cdn.com/20221130/322abab11a912bed667f6f15dc8225fb.jpg

Sent from my Pixel 6 Pro using Tapatalk

I have AVDI PN18 ( 1380€ !!!! ) i never use it on old BSI , particular in JC EV , ABRITES is not for this cars , PIN code reading method is not safe !!!!
Why they don't copy I.O Terminal PSA since many years ????? Never efraid ?????

[rapidlocksmiths]

ive done literally hundreds of these , only once did i have this issue , that was a 2016 berlingo full battery support on , exact same issue , couldnt use the back up flash as corrupted , i had big list of flash files , but not this one at the time 1275 i believe from memory , contacted kap and they sent me good file in minutes and quickly sorted , now my list is bigger still , must have done over 80 since this with no further issues.

no explanation as to what caused it or why , just an odd freak one , though as easily sorted its not end of world

just 1 out of around 200 similar psa using offline software isnt that bad especially as quick fix , though kap did advise using online software as has had many updates since updates stopped on old software .

[gttuning]

I did loads over the years also. Never ever had problems and I have a big list with flashes there which is been done with AVDI, but this one read it all good untill verification and then all stopped , dead , just stopped at the verification ,booster on the battery also. Never pulled the pin just at the verification stopped. Tool automatically saved the backup.

Sent from my Pixel 6 Pro using TapatalkIt happens once to me with online software with new type berlingo ..
2019...
Stop at 70% writing flash..
Car dead no ignition..
Wrote buckup and back on ok..
Tryed again and all went good..
But offline PSA never fails on me..for reading pin..km..akl..always worked.

Sent from my SM-G965F using Tapatalk

[autoTkey]

it would help others if you state how you fixed it , the procedure you followed as you wont be the last person this happens to and i bet plenty here wont know where plenty of others will.

I already described how. Find the corresponding flash from the forum and upload to the BSI. Important bit - must use only the same version.
Same as all of you fixed it. This is the only way to get out of this issue.
On Autel you can get PIN with working key without reflashing the BSI - it only takes a few seconds. Much safer...

I have also done hundreds even close to a thousand... To me it happened on old C4 Picasso few weeks ago. With AVDI of course. Problem was in the OBD port - it was too loose and didn't had stable communication as it was discovered after the problem happened. DUMP corrupted so had to search the forum and it saved the day. Could've been the same with you.

[rapidlocksmiths]

very likely the same cause , psa obd are awful .

my reason for the post suggesting the poster conclude with how he resolved it was to close the subject objectively , so many post with , sorted it , or a member sorted it for them , or just dont post the outcome at all , i just like to see a problem when posted also concluded theres then info for the next unfortunate .

[gttuning]

Check opel guys after recent update..
Won't open for me ..https://uploads.tapatalk-cdn.com/20221201/ea0de6b6e027cecfa725dbbddecb3720.jpg

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

i updated on tuesday pm , and used the vauxhall software yesterday on an astra j which worked seamlessly , send log to support and request new software links if the issue .

ive just rechecked mine and all working on opel and vauxhall links .

when i had to buy new avdi unit and have software transfered last year it was similar issue i was having mostly on non can models of opel/vauxhall , new avdi was needed on that occasion.

[gttuning]

i updated on tuesday pm , and used the vauxhall software yesterday on an astra j which worked seamlessly , send log to support and request new software links if the issue .

ive just rechecked mine and all working on opel and vauxhall links .

when i had to buy new avdi unit and have software transfered last year it was similar issue i was having mostly on non can models of opel/vauxhall , new avdi was needed on that occasion.It was working before update..
But firmware update it aswell so hope didn't brick the interface..
Support checking this now through Team Viewer...
Don't know why but I just requested new links..but they want to check with TV..
Online works OK.. offline not..



Sent from my SM-G965F using Tapatalk

[gttuning]

2020 AKL Partner..
All super at first go..
Read pin ok.
Write flash ok.
[emoji106][emoji106][emoji106]


Sent from my SM-G965F using Tapatalk

[gttuning]

Also good response from support..[emoji106]
Quite quikly got back to me
And check few things with Team Viewer..
Links r ordered so hope this will fix my issue with Ople..

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

at least support are on it , though this is happening far too often at present .

one for AlekN to look at , it seems after update we are getting far more issues with some licences not opening , hyundai was a common one for many , missing files etc , never used to be an issue but in recent months its been far more common after updates to have these issues , its a pain for us as downtime costs money and reputation , it must also be painfull for support as busy sorting out these issues .

[gttuning]

at least support are on it , though this is happening far too often at present .

one for AlekN to look at , it seems after update we are getting far more issues with some licences not opening , hyundai was a common one for many , missing files etc , never used to be an issue but in recent months its been far more common after updates to have these issues , its a pain for us as downtime costs money and reputation , it must also be painfull for support as busy sorting out these issues .Yeah. Not good ..went to code key on astra j ..Opel wont open..travel 1 hour to this job.
Good job I also have im608..otherwise would be wast off time..

Sent from my SM-G965F using Tapatalk

[autoTkey]

Autel is better at Opel anyway - no need to remove car battery to reset after programming to turn of the check engine light.

[Weasel3]

Autel is better at Opel anyway - no need to remove car battery to reset after programming to turn of the check engine light.

And the IM tool, also fail at other things.
Fully updated.
Like Trafic3 AKL. 2015.

A small grey Star Pad, made the day.

So you need them all.
Not just one brand, of programmer.
Probably at least 10, different vendors/products/developers.
Just to be able to sort things out, there and then.
Out in the field.
When travel long distances.
Doing this kind of work.

[autoTkey]

Of course, I talk only for the Opel menu. There are other situations where it fails. I did not say it is better than AVDI as a whole - because it is not.

[rapidlocksmiths]

avdi like every tool has its fails and its headaches , luckily most will have other tools that do save the day when this happens , just as avdi can unexpectedly save the day when a prefered tool fails , ive had a number of fords where my prefered tool has failed and avdi has saved the day , this is normal.

its the unnecessary faults that are becomming more common , like missing dll files , some licences not opening etc that seem to be happening after update , its these that annoy as a perfectly working function not working after update that new links fixes shouldnt be happening on a premium tool.

[rapidlocksmiths]

looks like a bug fix has been sent out as had new links again today to install .

downloaded new links and all fine

[gttuning]

New links fixed the issue with Opel ...
But definitely something needs to be checked as this is more frequent now ...that after updates we have issue with AVDI..


Sent from my SM-G965F using Tapatalk

[garagetech007]

Hello, I am correcting you, the car does have a working key, 2 for that matter, it belongs to a friend of mine. The keys are not in the car for the test, Abrites diagnostics for BMW online forces ignition ON. As you saw the ISN is fully extracted. This procedure was also demonstrated live in Italy.
What is the point of the comment? Just out of cuiosity - What would the purpouse of faking this video be? Lie to you and get slaughtered on DK, Social media, emails, tickets, phone? Not really something I would be looking forward to. The videos are made to help people. Of course they serve their promotional purpouse as well but "HOW TO" is the main drive. I created the Youtube channel so that I could help people. If we fake something we would get minced by you guys so this would not be something we would do.
Best regards,
Alek

Hi Alex obd doesn’t work on fem , how long of a wait for this?

[qwojtus]

Hi Alex obd doesn’t work on fem , how long of a wait for this?

Luckily BDC works. There is no another company made this function yet.

[gttuning]

Hi Alex obd doesn’t work on fem , how long of a wait for this?It never ment to work by obd..
Bdc only.

Sent from my SM-G965F using Tapatalk

[figani]

So this new bmw package BDC obd...
F Series, FEM is not supported only BDC...?

[vageric]

So this new bmw package BDC obd...
F Series, FEM is not supported only BDC...?

yes only bdc supported.

[rapidlocksmiths]

if it was all fem it would be alot more expensive i suspect , but even bdc only is an achiement as nobody else has this yet

[Ecuprog31]

I never seen bdc in BMW cars
just in MINI F SERIES

[mjoesen]

X-series I beleve, but correct me if am wrong.

[autoTkey]

I never seen bdc in BMW cars
just in MINI F SERIES

Well, MINI is just another name for BMW. Still, there should be some with BDC wearing the BMW logo... I also never encountered them but I found this list here on DK forum.
929941

[gttuning]

F15 has bdc ..sofar I remember..done one for akl way back

Sent from my SM-G965F using Tapatalk

[qwojtus]

I like the situation, some people posting here any thoughts they wake up without checking anything.

The key facts are eg:

BMW BDC versions : F46, F45, F52, F39, F48, F49, F15, F16, F85, F86 thats only from memory.

I personally do them 50:50 and more failures/errors appears on the BDC cars.

[nazz2]

Has anyone else got the same problem as me, with regards to the new tool box? it keeps saying "connecting to server", and another problem, it got installed on the pc, with above message, it took few minutes, but trying to install on a laptop, it quickly goes to 100%, but doesn't install the software!!

update. uninstalled the toolbox on my pc, then i managed to register an Email and run the Toolbox on my laptop.

[pvkm]

Hello everyone, it is written that in the tool box there will be a PSA PIN by VIN tool, well, I didn’t find something after installation, is it like that for everyone?

[joemajdalani]

Hello everyone, it is written that in the tool box there will be a PSA PIN by VIN tool, well, I didn’t find something after installation, is it like that for everyone?

Same with BMW and VAG dump tools, they will be the first to be added to the toolbox according to Abrites news.

[rapidlocksmiths]

i read it that for now its the mercedes functions , bmw , vag , immo off and psa vin to pin tool will be in upcomming developments , so not yet

[habbyb]

Has anyone else got the same problem as me, with regards to the new tool box? it keeps saying "connecting to server", and another problem, it got installed on the pc, with above message, it took few minutes, but trying to install on a laptop, it quickly goes to 100%, but doesn't install the software!!

update. uninstalled the toolbox on my pc, then i managed to register an Email and run the Toolbox on my laptop.
same problem , not working .

[nazz2]

Keep trying, i managed to register and get it to work after loads of tries mate.

[rapidlocksmiths]

just loaded this and all went through 1st time , downloaded to pc and unpacked it to pc , attached avdi to pc and opened the program , entered my email that is registered to my account , system sent me an email to verify my email , once verified the program opens .

[pepi]

Is anyone using EP003 - Bosch MD/MG ECU manager I need some feedback how is it working on
MD/MG ECU-s .

[habbyb]

just loaded this and all went through 1st time , downloaded to pc and unpacked it to pc , attached avdi to pc and opened the program , entered my email that is registered to my account , system sent me an email to verify my email , once verified the program opens .

good , and how do you open it the second time , it doesn't work for me it behaves as if it is not installed.

[cl55]

good , and how do you open it the second time , it doesn't work for me it behaves as if it is not installed.

maybe try use the search function on your computer: "tool box"

[rapidlocksmiths]

i have reopened it a number of times , i get the 4 links , though bmw and vag both say comming soon when clicked , mercedes opens next page , immo off opens next page , so at present working for me

[habbyb]

maybe try use the search function on your computer: "tool box"

Yes , super thanks working .

[rapidlocksmiths]

Yes , super thanks working .

ah i see now , you couldnt find the link the 2nd time , yes i had this , i searched for abrites toolbox , went to its location , created a shortcut and put this on desktop , so where i need it now

[davorOS]

Hello
Anyone manage to connect PROTAG V2 over bluetooth?

I try on win 7 and win 10 but can't find device
only visible when try to find it with phone if use laptop I can't find it

regards

[pepi]

They say " a future extension for bluetooth connection " may be it is not available now.

[davorOS]

YES,not available yet

it would be great to have it,less cables to mess with

[davorOS]

just confirmed yes,not available yet

would be great to have it .less cables to mess with

thank you

[gttuning]

Anyone have issues recently with update links..??.
Some links they sent don't work ..some works ..complete mess..
After last update opel went bananas..
Sent me new links ..fix opel now vw is that slow that I need tablets befor I use it...

Purchased few new software today..got new links half the links don't work!..



Sent from my SM-G965F using Tapatalk

[pepi]

Try with another browser, sometimes I use Opera for download .

Sent from my SM-G986B using Tapatalk

[gttuning]

Try with another browser, sometimes I use Opera for download .

Sent from my SM-G986B using TapatalkI tryed..
The last time I had this I need it to be sent links again...



Sent from my SM-G965F using Tapatalk

[autoTkey]

Anyone have issues recently with update links..??.
Some links they sent don't work ..some works ..complete mess..
After last update opel went bananas..
Sent me new links ..fix opel now vw is that slow that I need tablets befor I use it...

Purchased few new software today..got new links half the links don't work!..



Sent from my SM-G965F using Tapatalk

So far (8-9 years) - never had such problems. Have you tried downloading on another device to see if it goes well? It could be bad luck, but...

And every time the software isn't working as expected a simple full uninstall>install has been able to fix it.

[autoTkey]

By the way, anyone knows if I can use an old ZN001 TagProg from one AVDI interface ON another interface (which does not have this license originally)? Is it enough just to attach the ZN001 to the other AVDI interface or it will not work because the license can't be transferred?

[gttuning]

So far (8-9 years) - never had such problems. Have you tried downloading on another device to see if it goes well? It could be bad luck, but...

And every time the software isn't working as expected a simple full uninstall>install has been able to fix it.Today works no problem..
Tryed diffrent browser....diffrent laptop..

So tryed again this morning..click ..and works OK..

Install it an all works fine..[emoji106]

Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

the link issues tend to not affect everyone when it happens , but new links always solves it .

[nazz2]

Server not working today!

[autoTkey]

Promo ended yesterday. Probably is overloaded.

[fred77]

Quick question guys
Did a Mokka X 2017 using standard Astra-J fob.

Yet supplier reported this as a 2017+ alternative fob p/n 42495044.

What fob are you guys using ?

[Ecuprog31]

HI
anyone has tried to add card for clio V?
Is it working ?

[rapidlocksmiths]

Quick question guys
Did a Mokka X 2017 using standard Astra-J fob.

Yet supplier reported this as a 2017+ alternative fob p/n 42495044.

What fob are you guys using ?

still same fob just funkier coloured cases

[gttuning]

Server not working today!There was Internet issue on Abrites side this morning..

Sent from my SM-G965F using Tapatalk

[autoTkey]

By the way, anyone knows if I can use an old ZN001 TagProg from one AVDI interface ON another interface (which does not have this license originally)? Is it enough just to attach the ZN001 to the other AVDI interface or it will not work because the license can't be transferred?

Nobody tried ?

[doolittle]

Nobody tried ?
Works fine

even one from a Chinese FVDI works

[westwoody]

done a spare key on a 2016 mini clubman today using the new BDC software, works great

anyone any idea of a recent cost bmw uk charge for these supplied and programmed

regards

[mjoesen]

done a spare key on a 2016 mini clubman today using the new BDC software, works great

anyone any idea of a recent cost bmw uk charge for these supplied and programmed

regards

Perfect! I still wait for my first BDC car to try on. Did you use the new CB015 cable? How long did it take?

[Manta1600]

What is the success rate on PIN code reading KIA/Hyundai cars AKL with 4D70 keys?

[Antonio266]

I've also tested the new BDC function, on Bmw F45.
Tested on bench with a spare BDC I have.
The function works, tried also with different versions of swfl, and it works till swfl 85.
On Bench with normal AVDI OBD cable it takes 10 min, with Enet CB015 it takes only 1-2 minutes to unlock the BDC.

[westwoody]

Perfect! I still wait for my first BDC car to try on. Did you use the new CB015 cable? How long did it take?


i did it on the car and used the new cable, didnt time it really but approx 5-10 mins, but i had working key so didnt have to get isn

regards

[habbyb]

it's great what we hear , would be great in the future to be able to do FEM .

[auto techniek]

Guys

Does avdi precode wel remote Fiat Panda. I just did one but remote does not work. Black remote with PCF7941

[Antonio266]

Guys

Does avdi precode wel remote Fiat Panda. I just did one but remote does not work. Black remote with PCF7941
If you're talking about Panda 169 (2003-2012) the answer is: No, only TMPro can precode correctly that Remote.
AVDI and other programmers can precode only the Transponder part of the Key, not the remote.
I do them with both AVDI for reading the Siemens BSI eeprom, and TMPro for the remote precoding, then learn keys on car with AVDI.

[auto techniek]

Thanks mate.

I ve tmpro2 somewhere with package 48
Can I precode remote after programming transponder with avdi?

[Antonio266]

Thanks mate.

I ve tmpro2 somewhere with package 48
Can I precode remote after programming transponder with avdi?
No you can't, now the key is already precoded, you need a virgin one.
Or if you have an original Panda Remote you can unlock it with TMPro and precode again.

[tkmotors]

Abrites Jlr never work for me for cars over 2015 AKL
Today tried to program AKL for jaguar XE 2016 and showing message CONNECT AVDI TO THE CAR but Avdi is connected
Anyone have the same problem

[rapidlocksmiths]

i would suggest the first thing to do is to send your log files to abrites or to your distributor , if having connection issues there should be a log file that they can get to the bottom of the issue , otherwise its all guesswork.

ive done a number of jlr 2016 and 2017 all keys lost with avdi .

if the problem is a message connect avdi to the car then it sounds like a connection issue , this could be a fault with your avdi , could be an issue with your obd cable or cable from avdi to pc , could be an obd issue on vehicle , could be many things if not managing to connect your avdi to the car , though it should register a log file which will point support to the exact issue rather than have alot of us just guess whats wrong and go around in circles giving answers that may not help as guessing. this is what abrites or your distributors support teams do well.

[fred77]

Abrites Jlr never work for me for cars over 2015 AKL
Today tried to program AKL for jaguar XE 2016 and showing message CONNECT AVDI TO THE CAR but Avdi is connected
Anyone have the same problem


Those over 2015 are normally locked (AK72) - I'm no JLR Abrites expert but thought separate function where you use Abrites expensive own keys with programmable id.

Also don't forget no JLR car is alike - when did it last visit dealership? Updates are continuous and lockout aftermarket tools or later all tools.

PS.
Be carefull with Abrites as it modifies p-flash. I've never used it since nasty experience on 2015 model. However this was a few years ago....

[gttuning]

Guys i have akl on 2018 lancruiser..
Key from dealer..smart key.
Whats the procedure on them?.


Sent from my SM-G965F using Tapatalk

[Manta1600]

When I bought new module they sent me links should I download and reinstall all 5BG files or just need to do update from AVDI software?

[rapidlocksmiths]

they only update common software twice a year i was told , you should be fine just deleting personal id software and loading new

[AlekN]

I had password trouble with the Forum. Sorry for not replying for a couple of weeks but I also wasnn't working. Happy new year and let me know if you need any help :)

[nazz2]

Hi Alek, can you shed some light on this problem pls? Tried to code a used ELV to a 2009 Porsche Boxster, loaded bcm and elv dump to the software, it goes into programming, then says"N OK" any ideas? thanks

[AlekN]

Hi Alek, can you shed some light on this problem pls? Tried to code a used ELV to a 2009 Porsche Boxster, loaded bcm and elv dump to the software, it goes into programming, then says"N OK" any ideas? thanks

Hi Nazz, I will but please try to send an email or open a ticket because I do not know a lot about porsches and I will definitely need support from the developers and to get that I will need a ticket. Because I do not know enough to help you.

[nazz2]

Thanks Alek, will be in touch with avdi support soon.

[whiskeyman]

the ford etis button asks you to put in vin then nothing
has this button ever worked before??

[bonecrusher]

Hello Guys,

Busy with a Merc w204

what aftermarket merc keys are compatible with the AVDi? i Have tried programming a few without success.

[Matronix]

Hello Guys,

Busy with a Merc w204

what aftermarket merc keys are compatible with the AVDi? i Have tried programming a few without success.

Xhorse is ok, doing 100's of them so far and little to no issues

[Matronix]

If you're talking about Panda 169 (2003-2012) the answer is: No, only TMPro can precode correctly that Remote.
AVDI and other programmers can precode only the Transponder part of the Key, not the remote.
I do them with both AVDI for reading the Siemens BSI eeprom, and TMPro for the remote precoding, then learn keys on car with AVDI.

not true... I made several Panda remotes last year and frankly all my other tools did not cut it, only Abrites/AVDI did! So indeed both transponder and a working remote. Works after programming transponder.

[Matronix]

I noticed some people had issues with the links as being send (after new software bought most likely) - I normally ignore them and used the 'software update' function from the tool main menu. It opens a link with your specific links, so far no issues doing it like that (but as with all things, it goes right until it doesn't )... it is worth a try however if you are already in a bad spot and need quick options to try (so not waiting for Abrites to reply).

[Antonio266]

not true... I made several Panda remotes last year and frankly all my other tools did not cut it, only Abrites/AVDI did! So indeed both transponder and a working remote. Works after programming transponder.
AVDI can't precode REMOTE Data on Panda 169, tested many times. Only tool capable is TMPro, all other precode only the Transponder part, not the remote.
Probably you're confusing it with New Panda, 2012 and up.
I talk because has been tested more than one times, and it's a well known thing that only TMProg has solution, except some people capables of manually precoding the Remote Data by Siemens BSI eeprom.

[ThiagoArgentino]

Hi Nazz, I will but please try to send an email or open a ticket because I do not know a lot about porsches and I will definitely need support from the developers and to get that I will need a ticket. Because I do not know enough to help you.






Hello AlekN. About JLR 2020+ fixed the problems of Abrites keys not working presence ? A client of mine with an E-Pace 2019, it doesn't have an Ultra Broadband system, and I've already bought all the 315Mhz keys that you launched, and nothing works... I need a solution, it's been 1 year and 2 months since they launched...

[martinez9049]

Hello AlekN, is the CB015 cable just a regulat enet cable? Can I use an enet cable I already have with BDC through OBD? Or do I have to purchase CB015 abrites enet cable? Thanks

[vageric]

anyone know if abrites can make fiat 500 2021/2022 keys?
and if keys are still pcf7936

[rapidlocksmiths]

if keyless system its 6A chip on the new fiat 500 , remkeys sell the keyless keys https://remkeys.com/product/oem-fiat-500-4button-smart-atmel-aes-6a-433mhz-keyless-go-ftrk26-remkeys/

not had pleasure of seeing one of these yet so a question for alekn whether abrites has coverage yet.

ive had a late 2020 that was still on old bladed key , abrites does cover 2020 onwards fiat 500 with mopar system.

[vageric]

Rapid, its same as old keys from fiat ducato and 500.
just recieve a pic from client.
so i think its pcf7936.

[rapidlocksmiths]

a remote key wont be pcf7936 it will be 7946 , a manual key was pcf7936 .

its not same as ducato , sucato is marelli remote as is 500L , fiat 500 is delphi remote

ive had plenty of 2020 that use old key , i know that abrites had issues on late 2020 a while back where remotes wouldnt work correctly but im sure they overcame this.

[vageric]

im gonna go to the car next week and let know the result here.

[Matronix]

AVDI can't precode REMOTE Data on Panda 169, tested many times. Only tool capable is TMPro, all other precode only the Transponder part, not the remote.
Probably you're confusing it with New Panda, 2012 and up.
I talk because has been tested more than one times, and it's a well known thing that only TMProg has solution, except some people capables of manually precoding the Remote Data by Siemens BSI eeprom.

937498

trust me, this is not 2012 or later...

[rob h]

AMS active check.
I want to check, when my ams expires.
My account, on the Avdi website still works, but does reviel this info.

How do i check this?

[vageric]

go to vw and there you can see it in the thicker on top.

[vageric]

AMS active check.
I want to check, when my ams expires.
My account, on the Avdi website still works, but does reviel this info.

How do i check this?

go to vw and there you can see it in the thicker on top.

[autoTkey]

937498

trust me, this is not 2012 or later...

This is interesting. Before it didn't work and this was 100% tested. Maybe they updated in recent months or year but didn't advertise it.

Are you sure you used absolutely blank Chinese remote?

[AlekN]

the ford etis button asks you to put in vin then nothing
has this button ever worked before??
Is it possible for you to DM me the VIN? I need to check something and I know it was working fine up until very recently. There was something wrong with it two years ago but one of our developers fixed it.

[AlekN]

Hello Guys,

Busy with a Merc w204

what aftermarket merc keys are compatible with the AVDi? i Have tried programming a few without success.

BE keys also work fine, we do not have ANY restrictions but another company, let's call it a Chinese one decided to blovk the firmwares for us a while ago, that was resolved in an update from May/ April 2022.

[AlekN]

Hello AlekN. About JLR 2020+ fixed the problems of Abrites keys not working presence ? A client of mine with an E-Pace 2019, it doesn't have an Ultra Broadband system, and I've already bought all the 315Mhz keys that you launched, and nothing works... I need a solution, it's been 1 year and 2 months since they launched...
they do work, what is the KVM 4 digit code of the one you have, maybe it is new but for sure tested on the JPLA, - K8D2 2020+
- J9C3 2018+
all covered and tested. Tell us what is happening exactly.

[AlekN]

Hello AlekN, is the CB015 cable just a regulat enet cable? Can I use an enet cable I already have with BDC through OBD? Or do I have to purchase CB015 abrites enet cable? Thanks
I believe you are not obliged to use ours but I would prefer it if you did because we have tested them for sure.

[AlekN]

anyone know if abrites can make fiat 500 2021/2022 keys?
and if keys are still pcf7936

We have a 500E test car of the new generation and it is coming very soon.

[vageric]

We have a 500E test car of the new generation and it is coming very soon.

hope to hear from you how it went.

[gttuning]

Any hassle with EWS editor or i have fem version not supported??
F30 2012..
https://uploads.tapatalk-cdn.com/20230124/390ce6a8091135f2e95eb6b5600da4f6.jpg

Sent from my SM-G965F using Tapatalk

[vageric]

anyone knows where to buy keys keyless for outlander 2020 ?

[gttuning]

Will see how that gose..
Contact support about unsupported fem.
Few minutes later support come back to reflash to 040 software..should be good then..
Support sofar [emoji108].see how flashing gose ..https://uploads.tapatalk-cdn.com/20230126/499acf99c6725aa3f3157f1d011bf282.jpg

Sent from my SM-G965F using Tapatalk

[gttuning]

Went ok..
Programinf finished ok..no need for additional coding..as I seen few times car was left in transport mode..
This time all ok.
I do the rest on the bench..[emoji108][emoji106].https://uploads.tapatalk-cdn.com/20230126/81d1223c01dbf43c1f2494289b5bbf11.jpghttps://uploads.tapatalk-cdn.com/20230126/120b5b0cdd0e05312409ecd4e0f00aa8.jpg

Sent from my SM-G965F using Tapatalk

[habbyb]

Hello ,,,Contact support about unsupported fem.,,,what do you want to say abaut suport what did the support do ???? , tell more details .

[Matronix]

This is interesting. Before it didn't work and this was 100% tested. Maybe they updated in recent months or year but didn't advertise it.

Are you sure you used absolutely blank Chinese remote?

remkeys remote, so aftermarket 100%

[AlekN]

We saw the current version (early cars 2011-2012) which were never subject to dealer support were not updated and we do not have them in the database, we then used the service bulletins for version update to find out what the update was and we sent GTTUNING our suggestion, he then flashed it and it was successful. This is how we did it, you can probably do that too. Before you ask I cannot share the service bulletins but most of them are readily available (especially if you have a friend who has access to TIS).


Hello ,,,Contact support about unsupported fem.,,,what do you want to say abaut suport what did the support do ???? , tell more details .

[AlekN]

It is honestly very nearly there and so are some other absolutely great functions for the adaptations and coding.

hope to hear from you how it went.

[rapidlocksmiths]

alekN

are we any nearer to being able to do the new ducato ?

[whiskeyman]

also ford transit 72 plate fail to add spare key
BCM NU5T-14C184-AAD
thank you

[gttuning]

Also MQB..
poldiag is doing now akl. With sync file..
Any chance abrites will have thier own solution for them??..

Sent from my SM-G965F using Tapatalk

[gttuning]

2014 transit conect..
Had one here for repair with ecu ..bcm..and abs fitted from custom van ..all them parts workout not compatible for this conect van..

Man got me secondhand ecu abs and bcmii..
So I was testing how module initialization will doo with coding them secondhand modules..
So i swap one by one to see if it can code ..

All went ok..
Bcm unit learned ok..
Ecu learned ok
Abs learned ok

I think that last time I tried way back few years there was a problem with abs immobiliser...

Now all seems OK..


Sent from my SM-G965F using Tapatalk

[honda1200]

Is anyone else having issues installation of common setup for AVDI ?


keep getting lots of faults like this

[honda1200]

Is anyone else having issues installation of common setup for AVDI ?


keep getting lots of faults like this



all sorted. it had renamed one of the folders as they were one in the same location!

[phayz]

alekN

are we any nearer to being able to do the new ducato ?

The next Fiat update will allow you to prepare the transponder by dump of the external EEPROM.

[isma123]

The next Fiat update will allow you to prepare the transponder by dump of the external EEPROM.


new ducatos 2022 have different bcm

[rm23]

sorry mistake

[pepi]

Is anyone using AVDI as a passthru for JLR SDD and what version ?

[nenadgorgi]

It work i have installed sdd just for testing if it work or not i don't remember version of Sw
tested on freelander 2 read car info dtc live data .... etc

[isma123]

what happenend to the website ? whenever i try to get manuals or info it follows me to the french website ?

[gttuning]

what happenend to the website ? whenever i try to get manuals or info it follows me to the french website ?Works as normal

Sent from my SM-G965F using Tapatalk

[nazz2]

Hi Alek
Programmed a spare 2009 Fiat 500 key, but this time after the recent upgrade, it goes online for data processing, why has it been changed?

[rapidlocksmiths]

nazz i did a 2017 fiat 500 yesterday all as normal , unless theres a new update ive not recieved yet

[AlekN]

Hi Nazz, can I please see a photo, maybe send me a ticket or an email at support@abrites.com. I last tested it with the Ferarri key programming was business as usual. I dont think it is anything regular.


Hi Alek
Programmed a spare 2009 Fiat 500 key, but this time after the recent upgrade, it goes online for data processing, why has it been changed?

[AlekN]

Hi GT TUNING, Did you get the programmer from them yet? Yes, there is some chance. I would be checking the Abrites website this week if I were you (wink, wink).


Also MQB..
poldiag is doing now akl. With sync file..
Any chance abrites will have thier own solution for them??..

Sent from my SM-G965F using Tapatalk

[gttuning]

I didn't..get it yet..

Sent from my SM-G965F using Tapatalk

[gttuning]

Worked on E70 x5 today
Cas3+ istap 45..
Downgrade ok
Add key ok
Read cas 16byte isn ok
Read ecu 4 byte isn ok
Read egs 4byte isn ok.
[emoji106]

Sent from my SM-G965F using Tapatalk

[AlekN]

I am very happy to hear, you asked me about something earlier today.
https://abrites.com/news/revolutionary-new-abrites-programmer-rh850-v850-now-available


Worked on E70 x5 today
Cas3+ istap 45..
Downgrade ok
Add key ok
Read cas 16byte isn ok
Read ecu 4 byte isn ok
Read egs 4byte isn ok.
[emoji106]

Sent from my SM-G965F using Tapatalk

[mjoesen]

Thank you AlekN! I have to say that the last months development with BMW BDC obd, Ducato 2020+ and this news you are linking to is very impressive and appreciated.

[rapidlocksmiths]

Hi Alek
Programmed a spare 2009 Fiat 500 key, but this time after the recent upgrade, it goes online for data processing, why has it been changed?

just recieved latest updates and loaded them , so i will check on next fiat i get , i hope is not the case that we now have to be online as will kill alot of my work in underground car parks in city center

[nazz2]

As i mentioned above Martin, i had done few 500 and all being offline, this 2009 500, had to connect to the mobile fone net,and doing it online. software automatically said sending data receiving data, took 7 seconds. all good apart from the bcm lock, after battery rest all ok.will send log to Avdi.

[rapidlocksmiths]

yes do , i do alot of fiat 500 and KA cars as popular with the students , trouble is most are in flats in town center with underground car parks and no wifi signal or phone signal . having to be online would mean having to switch to different tool.

[isma123]

Works as normal

Sent from my SM-G965F using Tapatalk


WORKS NORMAL ONLY WHEN I USE VPN !
ELSE IT SEND ME TO THE FRENCH SITE ?

maybe i don't know how to type an adress but an answer from abrites would be better

tnks

[isma123]

yes do , i do alot of fiat 500 and KA cars as popular with the students , trouble is most are in flats in town center with underground car parks and no wifi signal or phone signal . having to be online would mean having to switch to different tool.


HUHHHHHHHHHHHHH ??

this job has always be done online ,
as they merged new update with ams (many free options to new users ) they have implement this to force us buy ams


300 X 100000 users = lot of money

[autoTkey]

Stop judging their business model already - I'm tired of reading about it. You bought what they were selling at the time and now you want the new functions for free? This means you want them to disappear because they won't be able to afford to pay their engineers.... Cut the hate already. You want functionalities - you must invest.

[gttuning]

I am very happy to hear, you asked me about something earlier today.
https://abrites.com/news/revolutionary-new-abrites-programmer-rh850-v850-now-availableGood news..
What about decoding immo data..Will this be like send file and pay for decoding or it will decode automatically online??..without additional charges??


Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

HUHHHHHHHHHHHHH ??

this job has always be done online ,
as they merged new update with ams (many free options to new users ) they have implement this to force us buy ams


300 X 100000 users = lot of money

fiat 500 like most fiat has always been offline , in fact i have done hundreds over the years with avdi and never once had to be online to do so .

in fact a 2017 fiat 500 , 2018 ducato and 2 vauxhall combo this week alone , all offline , last night i loaded new update and hope this is still the case following nazz post .

ams is actually good value compared to other tools and if buying a tool like avdi ams is not expensive at all and necessary to get the most from the tool , if you want to use avdi to its full possibility then buy and maintain ams , if you dont want ams then buy different tools , simple.

without the income from ams there would be less development , without development we all make less money , charge enough for your services and ams is a justifiable cost , abrites have as much right to a profit as we do and we make a decent profit if charging correctly , i dont get your comments at all . no such thing as a free lunch.

[AlekN]

Hi Guys, just to be clear, we are not doing any preorder for the moment. We want to be ready and sure it works as we have tested. We will then be able to say how to get one. We want you to be able to buy it directly and use it. Preorder is currently not going to be applied so 300X10000000000000000 is not the case here. Lets get the videos, user manuals, stress tests all set and we will then talk about buying one. For now we can tell you how we have tested it and this is in the news. I am also putting a blog post together and this will get us all up to speed.

[gttuning]

Alek give us a hint..
Decoding immo is at additional cost or with in the software?

Sent from my SM-G965F using Tapatalk

[AlekN]

[QUOTE=gttuning;4490580]Alek give us a hint..
Decoding immo is at additional cost or with in the software?

Sent from my SM-G965F using Tapatalk[/

Until the launch next month that is all the information we are allowed to share.

[rapidlocksmiths]

AlekN

is fiat prepare transponder and pin read still fully offline as always or as nazz has asked has this now changed ?

[nazz2]

Hi Alek
Check email pls, ford Ka 2009, spare normal key went online again, after 3 seconds the precoding, security, programming menu appeared, all ok though.

[gttuning]

[QUOTE=gttuning;4490580]Alek give us a hint..
Decoding immo is at additional cost or with in the software?

Sent from my SM-G965F using Tapatalk[/

Until the launch next month that is all the information we are allowed to share.I'm really hoping that its with in software..
As its a trend now for companies to make solution based on calculation at additional cost...
Time will show ..

Sent from my SM-G965F using Tapatalk

[isma123]

[QUOTE=AlekN;4490854]I'm really hoping that its with in software..
As its a trend now for companies to make solution based on calculation at additional cost...
Time will show ..

Sent from my SM-G965F using Tapatalk


they gave you all info in the news !!!!!!

if you read the full dump then no need for calculation UNDERSTAND how it works ???

[gttuning]

[QUOTE=gttuning;4491006]


they gave you all info in the news !!!!!!

if you read the full dump then no need for calculation UNDERSTAND how it works ???Didn't see it in news is it based on online calculation or read dumps....
Where did you see that..?

Sent from my SM-G965F using Tapatalk

[isma123]

the problem with virtual is that the processors are secured ,

the new programmer from abrites unlock acess to full memory where are stored pin cs km key data ...

[gttuning]

the problem with virtual is that the processors are secured ,

the new programmer from abrites unlock acess to full memory where are stored pin cs km key data ...We know where is the problem..
My question is if its online calculation will it be with in the software or send files read form car and pay for decoding..??.

Sent from my SM-G965F using Tapatalk

[p1et]

I think for adding a key we will have everything we need after we read full memory of processor but for AKL we will still need sync data which probably would be token based, something like poldiag does with bcm2, just my thoughts.

[gttuning]

Thats what I'm hoping that files will be calculated with out additional cost ...

Sent from my SM-G965F using Tapatalk

[habbyb]

hi everyone , this is very good news about this programmer anyway I want to buy it , but we must have patience and we'll see , please tell me if you had the opportunity for aerbag crash data after impact mazda cx 30 -2019 or 2020 if you know something , thanks .

[tkmotors]

BMW 4 series 2017 key programming not possible as SOFTWARE UNSUPPORTED
Abritus ������������

[Antonio266]

BMW 4 series 2017 key programming not possible as SOFTWARE UNSUPPORTED
Abritus ������������
What SWFL is your FEM?

[tkmotors]

I don’t know now as I have done this with VVDI .
Audi a3 2008 micronas spare key Abrites fail again ?????
Start reading and stuck on 0710 and nothing happens . I have this problem with few Audi before so send the log file to support but no response whatsoever.Vvdi done the job again

[gttuning]

BMW 4 series 2017 key programming not possible as SOFTWARE UNSUPPORTED
Abritus ������������Needs flashing to software that avdi support...
Unfortunately that software is not in database with avdi
..

Sent from my SM-G965F using Tapatalk

[gttuning]

I don’t know now as I have done this with VVDI .
Audi a3 2008 micronas spare key Abrites fail again ?????
Start reading and stuck on 0710 and nothing happens . I have this problem with few Audi before so send the log file to support but no response whatsoever.Vvdi done the job againThis is now for a while..
Can't remember but if go through wizard it works..if you go to cluster and add key it freezes...so unfortunately support didn't fix this ...I flag this while back..

Sent from my SM-G965F using Tapatalk

[isma123]

Thats what I'm hoping that files will be calculated with out additional cost ...

Sent from my SM-G965F using Tapatalk

with my dashcoder , done one virtual cockpit, it reads with my old programmer , so i suspect ABITES only want to sell us a new prorammer to replace the abprog
as they done with ZN 002

[rapidlocksmiths]

the new protag looks to largly be to accomodate the mercedes truck keys , old protag still does rest for now , i also still have my old tag tool prefering this on alot of functions

[davorOS]

I don't know why we can't use new protag over bluetooth?
they put it in but still not activate as i whose told

[gttuning]

Anyone tryed Ranger 2016 to read car configurarion??. Online is saying something about CCC data error.

Offline wont read aswell ..


Sent from my SM-G965F using Tapatalk

[rapidlocksmiths]

AlekN

why has abrites decided to take away offline pin reading and transponder preperation for fiat from us ? you did this once before with bmw and it took us months of complaints to get the offline software back.

today i had 2 x fiat vehicles , ducato 2010 and fiat 500 2012 , both required me to be online ! the ducato i did as was on the roadside , the fiat 500 was in an underground car park no internet so had to use a different tool, tomorrow i have 6 fiat 500 for local ice hockey team to do , all in an underground car park with no internet so cannot use abrites and have to use a cheaper competitors tool that is now more fit for purpose.

This is wholly unacceptable as kills abrites for fiat for anyone working in no internet locations and certainly not what we paid you alot of money for .

you had one of the best fiat softwares on the market , offline and quick and reliable , this is what we bought and paid you for , it takes same time so its not an improvement , so i can only assume its to force those that let ams lapse to renew , which is underhand if the case as the software is now useless without internet, which badly affects long term customers like me who pay ams every year far more than those that dont have ams , anyone with no ams and old software can still do this offline ,so its only long term customers and those that pay ams that you have hurt with this.

for me i work in 3 city centers , with underground car parks and multi stories where there is little to no internet , 50% of the fiat vehicles i do are for students in underground city center car parks , motorhomes on campsites in middle of no where , both where internet isnt an option , so you have made the best fiat tool for me into the worst and made my investment in abrites fiat a waste of money .

this is not what i paid for , i want back what i paid you for and have been using for many years , or your product has become worthless to me for fiat unless of course you wish to fully refund me for my fiat licences.

so a warning to anyone using fiat software in areas with no internet , if on the latest update then it wont work and is worthless , luckily other machines that dont require internet still work fine .

really unimpressed AlekN , so much for improving relations and customer service and re-establishing relationships with your long term customers, another diabolical move by abrites , which is a shame as you had been improving things , but it seems abrites just cant help themselves, extremely unhappy with this , maybe you would like to refund my fiat licences or do the right thing and give us our offline software back as well as you did with bmw.

why on earth would you ruin perfectly good working software that was the best on the market ??? it makes no sense.

[i-vtec]

Because this company have no sense - many many stupid things!

[nazz2]

Told you Martin, done few since the last update, all online unfortunately for the reasons that you have mentioned.

[rapidlocksmiths]

Told you Martin, done few since the last update, all online unfortunately for the reasons that you have mentioned.

irony is that those without ams and latest update can still use offline , i see no good reason to do this and make abrites unusable in areas with no internet.
ok not everyone is in a city center with underground car parks , not everyone attends jobs in area with no or poor wifi , but plenty of us do .

i used to advise abrites fiat to everyone , now i will advise against abrites fiat as for some its now worthless if no internet.

i cant see it being to push for more buying ams , as those without ams wont have this latest update so still able to do fiat offline so no benefit to increase ams
i cant see it being to prevent copying , as nearly all tools have fiat coverage now
so i fail to see or understand this .

like bmw and other softwares we can keep both offline and online softwares , no need to have stolen this from us.

even the cheapest china tools can do these offline but not the dearest tool abrites anymore , for my area its gone from best to one of worst in one foolish decision . the lack of response from AlekN for me says it all , so looks like my investment pot will be going elsewhere in future unless resolved.