Bosch Highline decode

[evilution]

Hi All,
I have a stack of faulty Bosch Highline stereos that I'm trying to combine into a few working units.

As I go through them, would it be possible to let me know the code?

Ta!

[bogege]

Code line not ok!!!
I get code 434A ?????!!!!!!

[shooting]

Hi All,
I have a stack of faulty Bosch Highline stereos that I'm trying to combine into a few working units.

As I go through them, would it be possible to let me know the code?

Ta!

Bad read, your code is 434A

wbr

[evilution]

Hmm interesting, so it's not a calculated code, probably a simple substitution cipher.
OK, doing some research.

edit: downloaded and compared all of the 95128 dumps uploaded on here by others. Seems simple enough.
2nd number is a straight run in reverse starting at 7 and missing out 08 to 0D
3rd number is a straight run forwards starting at 8 and missing out 02 to 07
4th is reversed pairs starting with 9 and missing 02 to 07

I don't have enough data to fill the 1st line but I have the answers for 0, 1, 2, 3 and 4 so it looks like it'll be reversed quads starting with 3.
3
2
1
0
7
6
5
4

Just not sure on the position of 8 and 9 though.

[smoggy]

Hmm interesting, so it's not a calculated code, probably a simple substitution cipher.
OK, doing some research.
yes it is a calculated code
try reading again or post another dump from one of your other ones

[evilution]

No need. I have created a spreadsheet and worked it all out. It's a simple thing like 00 = 3. 01 = 2. 02 = 1 etc.
Currently, as long as the code doesn't start in an 8 or a 9, I can work it out in a few seconds.

[bogege]

No need. I have created a spreadsheet and worked it all out. It's a simple thing like 00 = 3. 01 = 2. 02 = 1 etc.
Currently, as long as the code doesn't start in an 8 or a 9, I can work it out in a few seconds.

Please let us know about the result after your experiments!:hmmmm2:

[smoggy]

No need. I have created a spreadsheet and worked it all out. It's a simple thing like 00 = 3. 01 = 2. 02 = 1 etc.
Currently, as long as the code doesn't start in an 8 or a 9, I can work it out in a few seconds.

good to see you have worked it all out, but if any of your codes don't work feel free, we are here to help :crushed:

[evilution]

Thanks for the offer. I'll probably write a simple program specifically to tell you the code depending on the hex values inputed.
The decoding software you are using, do you just load in a BIN file and it spits out the radio code?

[smoggy]

Thanks for the offer. I'll probably write a simple program specifically to tell you the code depending on the hex values inputed.
The decoding software you are using, do you just load in a BIN file and it spits out the radio code?

no
just a simple mathematical calculation

[bogege]

I'll probably write a simple program specifically to tell you the code depending on the hex values inputed.

To do what you want will need a little more than you can create programs !!!! For example, you know where the code is located, how it is encrypted and so on !!
And if you know all this, there is no need for any programs !!!

[johnaboyy]

Would it be possible to give me a radio code for my Smart 451 Bosch Highline radio/cd/satnav with my serial number?

Smart 451 906 86 00

Bosch 7 640 051 110 001

Many thanks if you can.
John.

[masterskay62]

Would it be possible to give me a radio code for my Smart 451 Bosch Highline radio/cd/satnav with my serial number?

Smart 451 906 86 00

Bosch 7 640 051 110 001

Many thanks if you can.
John.

Hi, read eeprom 95128 and post it here
Don't spam forum!