View Full Version : Lancia Ypslon DTC B0100
AlfaRed
3rd February, 2018, 03:23 PM
Hi,
solution for DTC B0100 Internal module error
Bosch 0 285 011 805
thanks to those who can help me
Villainius
3rd February, 2018, 10:39 PM
Try this. Not tested
___________________________________________
if i helped, press 'Reputation'+'Thanks' buttons please
AlfaRed
4th February, 2018, 12:36 PM
No works!!! :(
Faults found
Error code: B0100
Error inside the control unit
Last test completed unsuccessfully
Error present
Failure warning lamp 'ON': Requested
ECU Internal Errors:
Central X Accelerometer: OK
Central Y Accelerometer: OK
Accelerometer 3: OK
Energy reserve 1: OK
Energy reserve 2: OK
ASIC 1: Fault stored
ASIC 2: OK
ASIC 3: OK
ASIC4: OK
Main Microprocessor: OK
Safing Sensor 1: OK
Safing Sensor 2: OK
EEPROM: OK
Voltage Regulator: OK
Driver Warning Lamp: OK
Pretensioners cut-in: 0
Side airbag trigger: 0
PROXI: Configured
ASIC 1: Fault stored
what is the faulty component?
Thanks
dragon100
4th February, 2018, 12:47 PM
Compare with previous solution, try and report.
AlfaRed
4th February, 2018, 03:12 PM
fault stored no works :(
Error code: B0100
Error inside the control unit
Last test completed unsuccessfully
Error present
Failure warning lamp 'ON': Requested
ECU Internal Errors:
Central X Accelerometer: OK
Central Y Accelerometer: OK
Accelerometer 3: OK
Energy reserve 1: OK
Energy reserve 2: OK
ASIC 1: OK
ASIC 2: OK
ASIC 3: OK
ASIC 4: OK
Main Microprocessor: Fault stored
Safing Sensor 1: OK
Safing Sensor 2: OK
EEPROM: Fault stored
I think the data is corrupt ..
does anyone have a virgin file?
Thanks
Villainius
4th February, 2018, 07:54 PM
most likely hardware malfunction
dragon100
5th February, 2018, 07:37 AM
Yes it looks like hardware problem ...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.