PDA

View Full Version : Freelander 1.8 immo off


Ahmy501
6th May, 2018, 07:08 PM
I need an immo off dump for a Land rover Freelander 1.8 MY2000 ECU is Motorola NNN100710 EOBD i have read the eeprom in 8-bits and 16 bits, also to note that i have tried the RUNFREE solution but its not working.

Thanks
s qubiak
6th May, 2018, 07:46 PM
Out off code line 72pin form ECU
firestator
7th May, 2018, 07:22 AM
This is not the right solution ... you can send synchronization
Ahmy501
7th May, 2018, 10:36 AM
Out off code line 72pin form ECU

Thanks i`ll try and report, do i have to work around the starter wiring?
Ahmy501
7th May, 2018, 10:38 AM
This is not the right solution ... you can send synchronization

You mean immo off is not possible for this type of ECU, have u seen any successful attempts to immo off a Freelander?
s qubiak
7th May, 2018, 11:30 AM
immo saved only in c66 cut off code line 72pin
in immo box connect pin 23 (black - red) with the ground pin 2 (black)
to make the starter run with turnovers
firestator
7th May, 2018, 02:58 PM
IMMO off is not possible, if you want to cut the machine, go to my Skype
Ahmy501
7th May, 2018, 03:47 PM
IMMO off is not possible, if you want to cut the machine, go to my Skype

hitting u on skype right now
Ahmy501
7th May, 2018, 03:53 PM
immo saved only in c66 cut off code line 72pin
in immo box connect pin 23 (black - red) with the ground pin 2 (black)
to make the starter run with turnovers

Just noticed that this a CAN based ECU i can see the white IC in the ECU that i have.