Clarion NX501E code please

[3inferno3]

sn : CL1004B0009922

BLUETOOTH QD ID - B015683

hov to get code from it?? Thanks

[3inferno3]

who can help??

[Raimax]

Where is your dump?

[3inferno3]

can you tell me first what kind of mem should be? eeprom flash??

[razvanrms]

resoftware the device http://www.clarion.com/ro/ro/user-support/software/NX501E-NZ501E/index.html

[3inferno3]

sn : CL1004B0009922

BLUETOOTH QD ID - B015683

iside was eeprom 24c16

[Raimax]

sn : CL1004B0009922

BLUETOOTH QD ID - B015683

iside was eeprom 24c16





Is this your dump?Old file date. Try code 0000

[3inferno3]

yes it is ori file dump
0000?

[3inferno3]

not work :( who can calc code from dump?

[Juliano31]

Code is on flash..

[3inferno3]

s...it....

[Hack01]

Hi,
i have carradio Suzuki SX4 - Clarion NX501E. i need code.

[reasson]

Hi,

Can someone calculate code for Clarion NX501E from Mitsubishi vehicle.

https://mega.nz/file/q9YzQYJL#t_7CYe4-6jZ4qSHOh4827-Xxw8hyYrdjzPNxGdcdDzk


927457927458927459

Thanks.

[shooting]

Hi,

Can someone calculate code for Clarion NX501E from Mitsubishi vehicle.

https://mega.nz/file/q9YzQYJL#t_7CYe4-6jZ4qSHOh4827-Xxw8hyYrdjzPNxGdcdDzk


927457927458927459

Thanks.

Just upload file here



wbr

[reasson]

Attached Clarion NX501 bin, file name is wrong KX instead of NX

[Raimax]

Attached Clarion NX501 bin, file name is wrong KX instead of NX

There is no code in this dump

[reasson]

I guess code is in the flash memory chip, is flashing the firmware will reset the code ?

https://www.clarion.com/ro/ro/user-support/software/NX501E/

[audiopoint]

need code NX501E
link for HY27UG082G2 https://wetransfer.com/downloads/e4c0cd5c7f4ac74e05a839ebdc06586920221228093820/90b80b

[shooting]

need code NX501E
link for HY27UG082G2 https://wetransfer.com/downloads/e4c0cd5c7f4ac74e05a839ebdc06586920221228093820/90b80b

For me code is in eeprom not flash, this is 501 not 503?


wbr

[Raimax]

need code NX501E
link for HY27UG082G2 https://wetransfer.com/downloads/e4c0cd5c7f4ac74e05a839ebdc06586920221228093820/90b80b

Difficult to find the code in a large flash. You can try one 0141

A 4-digit code?

[audiopoint]

For me code is in eeprom not flash, this is 501 not 503?


wbr

yes 501

24c02 is empty

[shooting]

yes 501

24c02 is empty

The info I have for 501 has 2 eeproms, this is the other eeprom (24C256), my info might be wrong



wbr

[Raimax]

The info I have for 501 has 2 eeproms, this is the other eeprom (24C256), my info might be wrong



wbr


NX501 and CX501 there are different models

[audiopoint]

model is like thread NX501E with Mitsubishi logo on start ,very similar with Zenec units
already flash with new software from clarion web but still ask for code
inside 24c16 and on small board 24c02 and HY27UG082

[shooting]

model is like thread NX501E with Mitsubishi logo on start ,very similar with Zenec units
already flash with new software from clarion web but still ask for code
inside 24c16 and on small board 24c02 and HY27UG082

I did a compare and this is the difference


wbr

[audiopoint]

Difficult to find the code in a large flash. You can try one 0141

A 4-digit code?
incorect,any idea

[Raimax]

incorect,any idea

NX503E has a memory 29GL064. Isn't there something similar here?

If you updated the radio, the code must be 0000

[neeewww]

In service manual ic21 sst39vf160 or en29lv160, may be code here. Need read 2 times - first and after wrong code entrie. Also try find counter in 24c16.

[audiopoint]

my mistake:chargrined: ,EN29LV160CB bottom side with interesting checksum

[audiopoint]

In service manual ic21 sst39vf160 or en29lv160, may be code here. Need read 2 times - first and after wrong code entrie. Also try find counter in 24c16.

THANKS friend :beer:

just follow your instruction solder 29lv160 back to board and enter wrong code 0000 but unit this time accept them :laugh:
before was try same code 3-5 time minimum
think now we have full set of dumps for decode and repair brocken unit

[Raimax]

THANKS friend :beer:

just follow your instruction solder 29lv160 back to board and enter wrong code 0000 but unit this time accept them :laugh:
before was try same code 3-5 time minimum
think now we have full set of dumps for decode and repair brocken unit

You don't read all the posts carefully. This was written in post #27

[neeewww]

THANKS friend :beer:

just follow your instruction solder 29lv160 back to board and enter wrong code 0000 but unit this time accept them :laugh:
before was try same code 3-5 time minimum
think now we have full set of dumps for decode and repair brocken unit

Now You have good possiblity full solve it - find code addresses. Set new code and read flash again. Offcourse if You have time for it.

[audiopoint]

probably after update (https://www.clarion.com/ro/ro/user-support/software/NX501E/) need to disconnect unit from supply couple of minutes
will try next time
thanks to all for help