View Full Version : BMW E61 CAS3+ flash 9147221
waldi1979
21st May, 2018, 07:03 PM
Hi,
I need flash:
BMW E61
CAS3+ 9S12XDP512
After odometer reset I have A0AD error.
I can't sync CAS<->ECU (I wrote ori file and the same problem)
While I was reading I had broken green wire from XProg. I think flash was corrupted maybe?
I attached my EEP.
marco70
21st May, 2018, 07:10 PM
You eeprom corrupted
waldi1979
21st May, 2018, 07:13 PM
Is it possible to repair?
marco70
21st May, 2018, 07:24 PM
There may be a problem
brend
21st May, 2018, 07:26 PM
Send flash.
And send both eep. ori/modified.
Hi,
I need flash:
BMW E61
CAS3+ 9S12XDP512
After odometer reset I have A0AD error.
I can't sync CAS<->ECU (I wrote ori file and the same problem)
While I was reading I had broken green wire from XProg. I think flash was corrupted maybe?
I attached my EEP.
waldi1979
21st May, 2018, 07:31 PM
Flash and CAS 2xEEP and EEP of ECU
marco70
21st May, 2018, 08:41 PM
Test and report
sync ecu -> cas
kiszka
21st May, 2018, 10:18 PM
..........
brend
21st May, 2018, 11:07 PM
Look like eeprom game over.
waldi1979
22nd May, 2018, 08:03 AM
Test and report
sync ecu -> cas
No CAS error. Sync not posible. I can start car only 1. After EWS Tampering....
Does anyone have flash to compare?
dijo
22nd May, 2018, 08:38 AM
Hi, in both eeprom dump from CAS you have ISN erased and if this car have ATM then this ISN is also erased...
waldi1979
22nd May, 2018, 09:00 AM
Manual trnsmission. Is possible read ISN from ecu and put in CAS?
kiszka
22nd May, 2018, 09:14 AM
..........
dijo
22nd May, 2018, 09:14 AM
yes, post ecu type and data
kiszka
22nd May, 2018, 09:31 AM
please delete
kiszka
22nd May, 2018, 09:38 AM
..........
waldi1979
22nd May, 2018, 09:45 AM
0281015130 EDC16C35
dijo
22nd May, 2018, 10:39 AM
to write and correct cas dump we need to decrypt dump with working key...
kiszka
22nd May, 2018, 10:48 AM
..........
dijo
22nd May, 2018, 10:57 AM
m8, this dont help because you dont have the key...
waldi1979
22nd May, 2018, 11:35 AM
I can read key by Abrities as Hitag. (probably corrupted)
dijo
22nd May, 2018, 11:43 AM
Post Screen image from Hitag and your working key!!!
kiszka
22nd May, 2018, 11:47 AM
..........
waldi1979
29th May, 2018, 06:27 PM
I read working key by Abrites.
One of the member dencrypt data immo and copied keys and isn (from Ecu) to the other dump.
Now the car is working properrly.
Thanks everyone for help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.