Renault master IMMO problem!

[zootyo]

Hi all!

Renault master 1.9 DTI Bosch MSA15.5 (028 010 142 ) HOM7700115265

The engine not start, blinking the MIL lamp (into STOP).
I think the immobiliser does not allow start.
In the ECU has a 24c02 eeprom. I writed the immo OFF. bin into the 24c04.

The engine is started and work, but up to 3000rpm the car is powerless.

This dump programmed : https://drive.google.com/open?id=1GXFZrmvvvfaadO5DSAQY0_KOyblIp0J0

What's the problem and how solve it? Could someone help me?

Thanks in advance.

[petronijul]

Hi all!

Renault master 1.9 DTI Bosch MSA15.5 (028 010 142 ) HOM7700115265

The engine not start, blinking the MIL lamp (into STOP).
I think the immobiliser does not allow start.
In the ECU has a 24c02 eeprom. I writed the immo OFF. bin into the 24c04.

The engine is started and work, but up to 3000rpm the car is powerless.

This dump programmed : https://drive.google.com/open?id=1GXFZrmvvvfaadO5DSAQY0_KOyblIp0J0

What's the problem and how solve it? Could someone help me?

Thanks in advance.

read ori eeprom 24c02 and post dump here

[zootyo]

unfortunately the original eprom is chrushed and dont read.... :(

[kiszka]

..........

[Shmortz]

for this ECU only virgin and emulator, otherwise MIL will blink and ECU will not store any other DTCs

[petronijul]

try this file and post result
cut pin 59
good luck

[zootyo]

Thank's a lot, tomorrow i try it and and post the result.

[zootyo]

Unfortunately not work! the situation is the same, the engine start and run, but not enough power.

Cut ECU pin 59 and pull up the eprom pin7 and connect to pin8.

video for a dash: https://youtu.be/T3vufnfEPFM

[kiszka]

..........

[zootyo]

Ok! :D

I'm search for the solution this problem.

[zootyo]

There is really no solution to my problem?
I have to buy a new ecu with keys?