skoda roomster all key lost

[rdu04]

hello
i have skoda roomster 2008 with magnetti marreli ecu petrol 4HV


i try program key but not succes
can help me give component security correct
i thing my abritus clone not give corect data
10 FF E5 7 0 0 A5 component protection data and pin 2021 it-s good
how should I do that?any help is welcome i have lonsdor,x100pad2
thanks

[brend]

Both immo id....SKZ7Z0H4765435
rorig dash........02021
ecu orig...........02021

[lupu_sandu]

You need ID48 normal and no dealer key for this.
Pin only

[rdu04]

I tried all the variants
I do not understand why I can not program it

[lupu_sandu]

Leave IGN on for 20 minutes, then will work.

[rdu04]

thank you sandu I will try

[brend]

Wrong put ,security time active 15-25 min.
Ignition on and wait .........

[rdu04]

i try 30 min ignition on but not succes
for how long? wait until the key led no flashes?
serial dash 5J0920 810B

[pouleddy]

Hi, if you have vcds go to immobilizer 25 not to dash 17, and all will done, maybe your diagnostic tools not accepting.

[rdu04]

i finally leave ingition on for 1 hour after can programming key thanks to all for help

[rusevi91kk]

Hi. We have same problem with skoda roomster 1.4 Benzin. Immo Chanel locked! Need wait 1 hour with IGn. On?

[rafal]

Hi. We have same problem with skoda roomster 1.4 Benzin. Immo Chanel locked! Need wait 1 hour with IGn. On?

Probably...... check security time

[rusevi91kk]

You have prepared ID48 T24 for skoda or normal ID48 Transponder learning?

[natkahello]

skoda fabia 2008 all lost key
hello counter 5j0920 811 c pam 93c86 pin needed in advance, thank you very much 864241

[emanuel2010]

pin code is 01711

[natkahello]

Thank you for the evening I will have access to the car, it will test it, best regards and thank you

[natkahello]

Thank you so much for help. The password was correct.

[filoxio77]

can anyone help me with the pincode? I detected 22841 but I can't code the keys even if I wait 30 minutes with the ignition on

[evgeny87]

correct login code is: 08835

[filoxio77]

Ti ringrazio tanto, adesso lo provo, che strumento hai utilizzato per trovarlo? e su quale eeprom?

[filoxio77]

Sfortunatamente non codifica la mia chiave nemmeno con questo codice PIN