VW Touareg 2008 all keys lost

[seishinkan]

Hello! The car is Touareg 2008, 3.6 FSI. Kessy - continental, transponder ID46, for US
Ask for help: client lost last key.
We get login and 6 bytes of CS by FVDI, but I dont know how get 7-th byte. Help please. Here dump KESSY

Login is 21512
CS: C1 18 79 0D 82 30 XX

Thanks

[ZAHEER]

hello mate do you have vvdi prog if yes then read the kessy with vvdi prog and post the dump here
now you read the eprom which is not ok for getting pin and cs you must read it with vvdi prog becaude it continental kessy

only read 93c86 is not enough to get the correct pin and cs

[seishinkan]

Thanks for reply, but we do not have vvdi prog. This is eeprom from kessy, but if I read eeprom from ECU and post here - it helps?

[immoresearch]

you need vvdi prog to read this eeprom
done it several times

[drugowaz]

What are you talking about. Why read need vvdi?

[ZAHEER]

because it is continental kessy not possible to get correct cs pin and mac from only eprom you must to read it in circuit
at the moment only two device i know who can do it tmpro2 and vvdi prog

[ZAHEER]

yes read ecu and post it here

[ZAHEER]

Thanks for reply, but we do not have vvdi prog. This is eeprom from kessy, but if I read eeprom from ECU and post here - it helps?

read ecu and post here

[seishinkan]

Here dump from ECU

[rob h]

How are you going to precode the transponder with the correct cs bytes?
id46

[seishinkan]

How are you going to precode the transponder with the correct cs bytes?
id46
Sorry, do not understand question)

Is CS in 1 post right? If yes - need I 7-th byte or no?
To prepare ID46 transponder I open FVDI and use "Make dealer key". But I'm not sure about valid CS

[rob h]

Your ecu and kessy hold the same 6 bytes and pin.
The fvdi key programming will search for the 7 during key programming.

[seishinkan]

car is ready, make transponder manually and add via standart procedure.
Thanks