e36 immo

[Tzepy]

hy guys can you help me please whit a immo off solution for this ecu

[Tzepy]

ecu bosch number is 0261203276

[Volker]

Hi. Hi.
I have here a software version with IMMO off of another BMW, but with the same Bosch number.

Its different to your 27c256, but maybe you'll give it a try.

No Pass needed.

[Tzepy]

thank you , i have try but is not working..

[adiagnostyka]

calculate isn and use emulator

[Tzepy]

there are two version of this ecu whit and whitout immo.

[Tzepy]

no solution guys please?

[Lambda1]

M43B16 oder B18?
Have solution in file for both.

[Tzepy]

it is 316 befor 93

[Tzepy]

please help me if you can whit bouth solution to try

[Lambda1]

Will send you file in evening - if i dont forget. Its working solution, use them many times before.
Also have to delete ews unit and connect two big wires for starter

[Tzepy]

any chance whit the files please

[Lambda1]

Forget you yesterday.
Will be send in evening.

[Tzepy]

thank you, i have try your solution but does not work, i have 2 ecu s but the same

[Lambda1]

But then you had a another problem. You can test emulator but think you had another.

[Tzepy]

i have try it whit 2 ecu s...

[Lambda1]

Dont talk about ecu ... failure can be on other side of car.

[Tzepy]

to have spark minimum condition is crankshaft and camshaft senzors , bouth of them are new wire check from them to ecu , suply to ecu etc , all are ok ....

[robert1232]

change 27c256 eprom values,but you should a use new one or delette old with UV tool.
conect big black wires on ews plug for stsrter crank
work 100 procent
press thanks
pw

[Tzepy]

thank you robert1232 the file is the same as Lambda1...... (http://www.digital-kaos.co.uk/forums/member.php/517014-Lambda1) (http://www.digital-kaos.co.uk/forums/member.php/517014-Lambda1)

[robert1232]

ok bud thih is from car lab immo

[trevormaharaj]

you have read fault codes? if no faults you have no ews isssue, cam or crank sensor or both faulty

[Tzepy]

i have replaced bouth camshaft and crankshaft senzors first thing, i have power to ecu and i replace a ecu to.....i have no dtc on diagnostic...