Immo off Bosch

[shooting]

Hi all, can someone give me an Immo off for this ecu?
Also can someone confirm that 5P08C3 is read as 25080?

wbr

[rafal]

https://www.digital-kaos.co.uk/forums/showthread.php/187962-Renault-Trafic-5P08-immo-off
Only emu.......

[shooting]

https://www.digital-kaos.co.uk/forums/showthread.php/187962-Renault-Trafic-5P08-immo-off
Only emu.......

Thanks friend :) but not the same ECU

[credoline]

5P08C3 is 95P08 SPI eeprom memory. Can not read as 25080. And for this Renault ecu (Opel Vivaro the same) not exist immo off, specially not in eeprom. You must repair car or if problem is with key, add new PCF7936 in the place of original key with remote.

[Gavra]

Hi all, can someone give me an Immo off for this ecu?
Also can someone confirm that 5P08C3 is read as 25080?

wbr This (https://carlabimmo.com/manuals/immobilizers/renault/renault-with-can-ver1.pdf) will be your fastest solution.

[kazoula55]

IMMO OFF Renault Trafic 1.9 DCI

[shooting]

5P08C3 is 95P08 SPI eeprom memory. Can not read as 25080. And for this Renault ecu (Opel Vivaro the same) not exist immo off, specially not in eeprom. You must repair car or if problem is with key, add new PCF7936 in the place of original key with remote.

Why do you say it can't read as 25080? 95P08 = 25080 .. it reads ok ;)

wbr

[credoline]

I say because is truth. And not read ok. And solution from kazoula is not complete. It say that write in flash file from non CAN ecu and recode eeprom and connect emulator which work on K line, but ecu is on CAN lines. Where to connect immo emulator K line?
Solution to start car exist with CAN immo emulator connected on CAN lines, but immo off not exist.


Why do you say it can't read as 25080? 95P08 = 25080 .. it reads ok ;)

wbr

[shooting]

I say because is truth. And not read ok. And solution from kazoula is not complete. It say that write in flash file from non CAN ecu and recode eeprom and connect emulator which work on K line, but ecu is on CAN lines. Where to connect immo emulator K line?
Solution to start car exist with CAN immo emulator connected on CAN lines, but immo off not exist.

So my read of 25080 is incorrect? it looks good tho...
Look at my dump in Post#1 .. is this a bad read then?
Can you provide a good read?

wbr

[credoline]

Download from here eeprom file from same ecu and compare them and find what is wrong with yours reading.
https://www.digital-kaos.co.uk/forums/showthread.php/263335-i-need-virgin-dump-for-trafic-1-9dci?highlight=0281010633

[seattm2012]

i dont know or good , but try :/

[Louislesinge]

Hi all,
What i allways do is read the 95P08 as 25080 with GQ4X4 for years without problems!

With emu, have a look here:
https://carlabimmo.com/newforum/viewtopic.php?t=17864

And:
https://carlabimmo.com/manuals/immobilizers/renault/renault-with-can-ver1.pdf

But it means to use a switch every time you start...
Greetings,

[Louislesinge]

Shooting, Your box is full!

Did you see this?:
http://www.digital-kaos.co.uk/forums/downloads.php?do=file&id=2976

[Louislesinge]

Here is the off:

[shooting]

Here is the off:

Thank you my friend :)

wbr

[Master8]

how to recognize if ecu is Kline or CAN version ? as far as I know, this car can have both