Immo Peugeot 307 2002 Valeo BSI G0X -00

[DigitalBacon]

Can someone help with pincode of following IMMO

Immo Peugeot 307 2002 Valeo BSI G0X -00

see attached.

[kiszka]

Can someone help with pincode of following IMMO

Immo Peugeot 307 2002 Valeo BSI G0X -00

see attached.
read is bad

[brend]

Dump not look good.
Read better.

[DigitalBacon]

Thanks, I tried while it was off removing eprom but wasn't sure which one it was and never got a read.. I tried these in red. was I trying the wrong ones.?

While car was on I got those dump that seem to be bad then.

[kiszka]

Thanks, I tried while it was off removing eprom but wasn't sure which one it was and never got a read.. I tried these in red. was I trying the wrong ones.?

While car was on I got those dump that seem to be bad then.
inappropriate

[DigitalBacon]

inappropriate

Dump not look good.
Read better.

read is bad

Just uploaded an image, can you help me figure out which is the right one. maybe I tried the wrong ones and that is why I did not work. Dump I attached was while it was on, so guess it was done wrong.

[ionut red50]

For 2002 it is not with eprom?

Trimis de pe al meu SM-J330F folosind Tapatalk

[DigitalBacon]

For 2002 it is not with eprom?

Trimis de pe al meu SM-J330F folosind Tapatalk

Could you please elaborate. We don't get much of these cars in my country so not sure how to proceed.

[ionut red50]

Try this o googlehttps://uploads.tapatalk-cdn.com/20190207/2502c786d44e41f4531783935b06a380.jpg

Trimis de pe al meu SM-J330F folosind Tapatalk

[DigitalBacon]

Try this o google

Trimis de pe al meu SM-J330F folosind Tapatalk

Thanks I'll try that, I got an UPA here.

[DigitalBacon]

Looking through all my junk/dongle/adapters I found this one, but no idea what software it uses. I found PSA cracked, but doesn't install the driver for it and show unrecognized. Would this help to read it?

[DigitalBacon]

So I did as recommended, hard to find what pins go to the UPA, but based on some diagrams I soldered 4 wires as following(actual picture of the job) and got this dump now, but I believe it's still wrong.

[kiszka]

So I did as recommended, hard to find what pins go to the UPA, but based on some diagrams I soldered 4 wires as following(actual picture of the job) and got this dump now, but I believe it's still wrong.
no immo data available

[DigitalBacon]

no immo data available

No immo data as I read it wrong using that pinout layouy? or it's corrupted ? Would really appreciate a little more guidance if you have an idea how to proceed.

[kiszka]

No immo data as I read it wrong using that pinout layouy? or it's corrupted ? Would really appreciate a little more guidance if you have an idea how to proceed.
read eeprom is ok
no immo data available

[lion0304]

Many GoX-00 when hardware came bad corrupt the eeprom, the red key light will ON in the middle af dash.

Now for pin: Read ECU, repair BSI PCB if you know or use doner BSI with virgin file and recode with Lexia.

You can virgin old BSI and recode, but problem will come back in some days or weeks.

[DigitalBacon]

Many GoX-00 when hardware came bad corrupt the eeprom, the red key light will ON in the middle af dash.

Now for pin: Read ECU, repair BSI PCB if you know or use doner BSI with virgin file and recode with Lexia.

You can virgin old BSI and recode, but problem will come back in some days or weeks.

Thanks I tried with Virgin BSI I found here on the forums, but seems it didn't work. thanks for the infomation though