DUMP FILE ANALYSIS

[Sparks Autotech]

Friends

I recently read an eeprom from Toyota Isis Immobilizer 93c66.
It first gave me a wrong reading. I used UPA serial programmer to read file and the car key could not be programmed with that file.


I then tried Using X100 eeprom program. The same eeprom gave me a different dump of which was used to program the key. The engine was started, and my client is happy.


Is there is any way you advanced guys on this forum analyse a dump that you may know that this file has been read wrongly or right?


any software to analyse the reading of dump?


Thanks in advance

[panos_k]

when you read the memory you need to verify.
To be sure, find another file from another car and compare it.

[brend]

No spetsial software for this, only experience bad/good job and 100Kg :banghead: away!!!

So......Welcome to DigitalKaos.:thrasher:




Friends

I recently read an eeprom from Toyota Isis Immobilizer 93c66.
It first gave me a wrong reading. I used UPA serial programmer to read file and the car key could not be programmed with that file.


I then tried Using X100 eeprom program. The same eeprom gave me a different dump of which was used to program the key. The engine was started, and my client is happy.


Is there is any way you advanced guys on this forum analyse a dump that you may know that this file has been read wrongly or right?


any software to analyse the reading of dump?


Thanks in advance