Im608 going to be the top programmer

[Manta1600]

Hi Friends. Have a problem with Audi A3 2014 (NEC 35xx) AKL. Server is down.Do you have similar problems?

Yes the server are down from 1 month

but do you have all updates?

Today I saw that they have update - Payment optimization - and think that this is releated to servers and soon they will work again

[Manta1600]

Today fail again to read pass on Corsa E - never had success on this car with this tool

[DenDroid]

Audi server closed for third party devices forever.

[okuser1]

Hi
Today try Ford 1998 AKl whith transponder 4C whith im508
Security access fail

[Manta1600]

Hi
Today try Ford 1998 AKl whith transponder 4C whith im508
Security access fail

Fiesta ?

Autel can't do them

[okuser1]

Yes old fiesta

[tepSIJA]

Hi
Today try Ford 1998 AKl whith transponder 4C whith im508
Security access fail

very old car for this type of tool
i dont use autel for 2005 or older car
Sbb, fvdi, ck100 and many more work on older cars fine

[alex_r_2001]

So far Autel IM608 has failed me numerous times when other tools have done without any problems..... examples are Benz w204 failed to get password or even read Ezs properly was able to do with VVDI MB Tool.... BMW msd85 failed to read isn I was able to read with Autohex 2 and also hexprog and VVDI 2................ BMW MSv80 failed to read isn always says check connection ..... I was able to read with Autohex 2 and VVDI 2 says unsupported. I need to change isn in MSV80 dme Autohex2 is read only I am going to have buy HExprog license to clone MSV80.... I thought hexprog would still allow to read and write ecu with license expired where I can at least get backup of ecu to change isn manually like I did with MSD85 but they shut down everything when license expires I thought they would only remove clone option... Not happy right now.... Anything out there thats not $1000 to be able to read write isn in MSv80 ??????? I suspect I got a deffective GBOX2 with Autel .............

[Manta1600]

So far Autel IM608 has failed me numerous times when other tools have done without any problems..... examples are Benz w204 failed to get password or even read Ezs properly was able to do with VVDI MB Tool.... BMW msd85 failed to read isn I was able to read with Autohex 2 and also hexprog and VVDI 2................ BMW MSv80 failed to read isn always says check connection ..... I was able to read with Autohex 2 and VVDI 2 says unsupported. I need to change isn in MSV80 dme Autohex2 is read only I am going to have buy HExprog license to clone MSV80.... I thought hexprog would still allow to read and write ecu with license expired where I can at least get backup of ecu to change isn manually like I did with MSD85 but they shut down everything when license expires I thought they would only remove clone option... Not happy right now.... Anything out there thats not $1000 to be able to read write isn in MSv80 ??????? I suspect I got a deffective GBOX2 with Autel .............

If Autel can do all cars soon every grocery will offer keys $30 each


Yesterday fail to add key on Aygo 2016 - the customer brought genuine key from Toyota dealer with 8A chip inside

[drugowaz]

To late. Time is came they already bake 20-40e.
East europe

[Manta1600]

To late. Time is came they already bake 20-40e.
East europe

Don't listen too much the customers


If someone do keys for 20e after one year he can't pay the anual subscriptions on his tools


Also he can't hold in stock keys and will offer just KD XH keys


No one will invest more than 30 000e to do the keys 20e


Sometimes beginers do them for 20e just to learn but when some cars go faulty they leave the bussines or increase the prices

[TERMINATOR1000]

To late. Time is came they already bake 20-40e.
East europe


i made transponder key for 40€ , i bought it 3€ , i'm in France , i have 20 000 € of device + key stock !
Buisness is dead for long time !
But if customer is AKL , he can prepare 120€ for single Chinese key :party :

[Manta1600]

i made transponder key for 40€ , i bought it 3€ , i'm in France , i have 20 000 € of device + key stock !
Buisness is dead for long time !
But if customer is AKL , he can prepare 120€ for single Chinese key :party :

It doesn't matter how much cost the key.


I charge them for my time and my knowage.


Everyone can decide how much cost his time and knowage

[Manta1600]

double post

[Andreastech81]

Hello DK friends, i would like to ask, can IM608 do PCF7941 reset ? Does it need XP400 pro only ? Or IMKPA too ? ... or not able to do it at all ? I see that VVDI programmer does that reset/unlock with adapter PCF79xx

[Manta1600]

Hello DK friends, i would like to ask, can IM608 do PCF7941 reset ? Does it need XP400 pro only ? Or IMKPA too ? ... or not able to do it at all ? I see that VVDI programmer does that reset/unlock with adapter PCF79xx

Autel can't renew the keys

[pkeeney]

This topic aged well and now we have the vvdi key programmer tablet.

Sent from my SM-N975U using Tapatalk

[IanBMW]

2017 Ford Kuga Uk
Smart key added in 7-8 mins Via OBD,good job
need strong internet connection, also leave your phone away from car, i think it was causing interference

[IanBMW]

2014 Audi A4 UK CNHC downloads eeprom data ok, but error message, reading IMMO failed
i have strong internet and battery maintainer, any IM608 users have tips for this car?

[IanBMW]

2009 Passat CC Diesel UK all keys lost, could not read IMMO data Via OBD,
Remove comfort module, desolder eeprom added 2 keys via bench. keys work perfect, good job

[IanBMW]

2009 BMW 520D E60 add key via OBD 10 Mins
need strong internet, good job

[IanBMW]

2006 VW Caddy Diesel UK All keys lost Via OBD
generate Dealer key, Need strong internet, good job

[IanBMW]

2006 Ford Focus 1.6 Petrol UK add key Via OBD success
5 Mins , good job

[solitaire]

lanBMW stop flooding, you can write this in one post

[IanBMW]

Sorry , just helping out community, 1 post in future mate
Thanks for letting me know

[Manta1600]

2014 Audi A4 UK CNHC downloads eeprom data ok, but error message, reading IMMO failed
i have strong internet and battery maintainer, any IM608 users have tips for this car?

Audi servers don't work maybe this is the reson

About the passat its never work by OBD only eeprom but I do them without desoldering just take few readings to be safe

[tepSIJA]

Audi servers don't work maybe this is the reson

About the passat its never work by OBD only eeprom but I do them without desoldering just take few readings to be safe

here is answer from autel

[Manta1600]

Today Ford F150 2016 keyless USA import AKL with active alarm - OK


the customer supplied used smart key ID49 868mhz - So looks like Ford ID49 are also reusable

[okuser1]

Smart 454 akl failed to program key
Q7 add key succes ID:8E whith remote

[IanBMW]

Audi servers don't work maybe this is the reson

About the passat its never work by OBD only eeprom but I do them without desoldering just take few readings to be safe

Can i add key to the A4 Via Bench with IM608? have you tried?

[pundravac]

Hi guys,
Is any one program key to Nissan Micra K14, add key or AKL with IM608?

[okuser1]

XP400 pro FAIL to read MCU 1D69J whith APB128 MC68HC05X32 adaptor.

[autocheck]

Is Autel im508 good on toyota Smart 2018 and above

Sent from my TECNO CE9 using Tapatalk

[pundravac]

Hi,
Any one know some thing about that Nissan Micra K14 key programming with IM608
And is any one try to clone PSA BSI with this tool.
Thanks

[Manta1600]

Is Autel im508 good on toyota Smart 2018 and above

Sent from my TECNO CE9 using Tapatalk

AKL - No

Its good to add key on some models - Yaris up to 2020 and Prius maybe to present day

Not possible to add key on Corolla and RAV4

[IanBMW]

Audi A4 2014 XP400 failed to read BCM2 ''chip locked'', Cant add key via OBD or Bench

[tepSIJA]

Audi A4 2014 XP400 failed to read BCM2 ''chip locked'', Cant add key via OBD or Bench


read my post #527 on this page

[nazz2]

Can this tool do spare remote key for fiat 500 2020? do these use the 12+8 gateway or is it via obd? if is via gateway ,any tip where its hidden? or do i need to buy a key from dealer? thanks

[fred77]

Is Autel im508 good on toyota Smart 2018 and above

Sent from my TECNO CE9 using Tapatalk



I tried on a C-RV 2017 AKL and that's a no.

Abrites looks the best

[fred77]

Can this tool do spare remote key for fiat 500 2020? do these use the 12+8 gateway or is it via obd? if is via gateway ,any tip where its hidden? or do i need to buy a key from dealer? thanks



I did a new Fiat 500 2020 last year (May-ish) w Abrites

Unless model now changed mate, it's same-old key

[key4man]

Jaguar XF 2012 , add smart key - ok

[Leeetoyo]

Just did a Opel Adam 2017 add key
Read pin, program key all went fine.

Opel Corsa 2017 wasn’t able to read pin..

[keyman keyth]

This is a great tool. They don't have the eeprom down yet but I would defiantly recommend.

[Matronix]

XP400 pro FAIL to read MCU 1D69J whith APB128 MC68HC05X32 adaptor.


Why did you need to read it? Cannot get pass by IR or Bench connection? EZS Benz if I'm correct?

[IanBMW]

2012 Renault Megan 3 1.5 diesel, IM608 fail to pull immo code, anyone have similar issue?

[IanBMW]

2012 Renault Megan 3 1.5 diesel, IM608 fail to pull immo code, anyone have similar issue?

UPDATE!! Had to buy sub and update IMMO software, works perfect now

[key4man]

fiat punto evo 2009 akl ,id 46 ,pin code, dealer key ,works perfect

[gttuning]

Hi all...
Can im608 read pin code from Isuzu D-max 2016
I went through options very qiuck but cant see anywhere

Sent from my SM-G955F using Tapatalk

[Antonio266]

Hi all...
Can im608 read pin code from Isuzu D-max 2016
I went through options very qiuck but cant see anywhere

Sent from my SM-G955F using Tapatalk
Check here mate https://www.autel.com/vehicle-coverage/coverage2

[milehighlockdoc]

This is a great tool. They don't have the eeprom down yet but I would defiantly recommend.True. Saab cim is a fail right now

Sent from my SM-N960U using Tapatalk

[Antonio266]

True. Saab cim is a fail right now

Sent from my SM-N960U using Tapatalk
I also have to program a remote key to Saab 9-3 2003 with Cim module.
IM608 can't program by OBD with pincode or by Cim dump?

[IanBMW]

2007 MITSUBISHI L200 AKL via OBD took 2mins success
2002 MERCEDES C270 W203 Add Key all via OBD success 9mins to pull code

[qwojtus]

Clio 5 2019 and Autel failure.

[autochei]

Jaguar XF 2012 , add smart key - ok
did u program only keyless?

[okuser1]

Fiat grande punto 2006
Read immo 93c86 by obd
Make dealer key
Key learning
Success

[Jimmy07]

Server down earlier AGAIN

[key4man]

did u program only keyless?
i program keyless remote

[dedz]

I try today clio V with ignition nok

Envoyé de mon SM-G975F en utilisant Tapatalk

[amar28]

2006 VW TOURAN AKL- 5 mins job - Need internet connection

[fred77]

no comms on i10 mrk 2 2019
or kia same year

I' m expecting too much :(

[Manta1600]

no comms on i10 mrk 2 2019
or kia same year

I' m expecting too much :(

Maybe You expect too much :)

One year ago I tryed to add remote on i10 mk1 without success - X100 pad programed the remote OK

After that I tried on other KIA's Hyundai's and I failed regulary so now I use directly X100 pad on them

[lesakljucevi]

Audi A4,2010 add key,5 min,read immo data,add key all OK.IM508

[key4man]

jeep grand cherokee 2017 ,akl, XH smart key , ok

[MACAN]

Akl renault kadjar 2015, all ok

[red69]

Smart fortwo 2001 nok, need to use FVDI

[fred77]

Nissan Narvara 2011 no joy. Used Truecode

[MACAN]

Ford focus 2007 add key ok, transpondeur generated with handy baby s-chip all ok

[Matronix]

Just a few other then the standard Polo 2010/2011 (many of those all OK - except for a few keys aftermarket which made dealer key but would not program due to chip was 'sticked' on the board but too far from ignition to read/program by the car) and other standard cars (some below not that special either, I know)

ALL OK = full proces so inc pin

- Range Rover from 09/2013 - added key in under 3 minutes (obviously not upgraded/locked KVM) all ok
- Opel Vivaro 2004 - first time no luck, second time had the sysflash on it and other set of aftermarket keys , all ok
- Fiat Punto Evo 2011 - tried all Eeprom immo read options and made dealer key but big time fail - no correct pre coding so no working FOB (10 legged chip) - Delphi BCM -FAIL
- Fiat 500 - Delphi - same method as the Punto Evo but succes - all ok
- Nissan Micra 2018 - under 5 minutes, all ok
- Renault Scenic II keyless (!) key - need to open door with keyless function before starts working but works fine - all ok
- Renault Megane II / Scenic II several 'standard' keycards, previously issues but tried and went smooth now - all ok
- Ford Transit Custom before 2016 - easy and fast - all ok
- Ford Transit Custom after 2016 - easy and fast - all ok
- Audi A6 2006 (I think, was the new style key) - all ok
- Nissan Qashqai - several , always watch closely to BCM warning with numbers and USE SysFlash! - all ok
- Peugeot Boxer 2012 - pre code / make dealer key in the control unit menu, not possible in automated functions - all ok
- Ford Transit blue key - as expected no issues - all ok
- Benz - lot of different ones ; W211 (standard and AMG, only can not source keyless key for this one), SKL200, W169, W245, W639, W203 etc. - ALL OK
- Peugeot Partner 2016 - all ok
- Seat Alhambra 2006 - ofcourse need to read Eeprom on bench but no support for programming in Autel , not even after retreiving pin - FAIL
- Toyota Auris 2013 smart key - all ok
- Audi A2 2004 - no pin -, read by VAG Reader and did it with VVDI since Autel failed - FAIL
- Opel Astra J tourer - all ok
- BMW 2 series and 3 series FEM - several on bench, good guidance for unlock/programming - all ok
- several Mini CAS3 - just held my breath, hooked up sysflash for the ones with downgrade and so far no issues (still itches every time) - all ok
- same for all kinds of BMW CAS3 , also did a CAS2 which (ofcourse) don't give any issues, just check frequency of remote - all ok
- Golf 7 SporsVan 2016 - no sweat except the little extra work on the HU162T blade - all ok

just a little sample of the things done with my IM608 in last period - taking it out first before the other tools now, most is ok but for Peugeot and Opel still I take out the Abrites set mostly. Renault only after last month that I got a few cards again which went ok now that confidence is rising (earlier on always had to fall back on Abrites so didn't even bother with IM608 anymore but seems to be ok now)

[Weasel3]

GysFlash? Charger

[fred77]

yeah long list there great

personally would of used other tools on sum. big balls on some stuff like range rover

[janake]

Bmw Fem add im608
2015
Good job

[MACAN]

Bench or all obd?

[pepi]

There is no OBD solution for FEM BDC yet.

[Manta1600]

yeah long list there great

personally would of used other tools on sum. big balls on some stuff like range rover

RR is without any problems with Autel eaven updated - If the KVM is updated you will have message that is not possible but can't go faulty

The big bals is on the Mini with CAS3+

[red69]

Hyundai I30 2008, learn immo OK but learn remote not OK

[lion0304]

Kia Rio 2017 smartkey 8A. Remote doesn't work any more but can start the car.

I repair remote, still the same. Use Xpad2, X300 Pro4 failed to read pin.

IM508 read quickly pincode then reprogram the key. Problem solved.

[mjoesen]

Mitsubishi Outlander Phev 2018. Failed to add a new OEM smart key, but could register the old one and at the same yime delete the lost one.

[Manta1600]

Mitsubishi Outlander Phev 2018. Failed to add a new OEM smart key, but could register the old one and at the same yime delete the lost one.

Bad key

I programmed a lot of them

[mjoesen]

Bad key

I programmed a lot of them

Key was from dealer with same number on back, but I guess it is like you say. Keys look like the one on the photo. 812280

[Manta1600]

Key was from dealer with same number on back, but I guess it is like you say. Keys look like the one on the photo. 812280

I have regular customer car trader that sell mostly this model Mitsubishi

One of the cars was with this model remote and I programed cheap chinese smart key without side buttons

Also one time programmed renewed genuine key - never had problem with this model

[djollie]

anyone done a smart key on a uk corsa f....reads pin code but asks to put key in key holder when trying to learn key...car does not have key holder?????

[jodge]

check the car's user manual there must be an emergency slot or place when you must put the key when the fob battery is gone. Unders the steering wheel like the bmw or something similar

[Manta1600]

Lonsdor KH100 has nice function to find the coils

[mjoesen]

check the car's user manual there must be an emergency slot or place when you must put the key when the fob battery is gone. Unders the steering wheel like the bmw or something similar

Yes, it is under Radio/AC in the center consol to the right.

Edit: sorry this was aswer was for another question.

[djollie]

Yes, it is under Radio/AC in the center consol to the right.

i had a quick look at the manual i'll try this location tomorrow.

813210


HOLD TO LEFT SIDE OF COLUMN

813207

https://www.vauxhall.co.uk/content/dam/vauxhall/Home/PDFs/owners/owners-manuals/new-corsa/new_corsa-owners-manual-july-2020.pdf

[fred77]

Mit Colt 07' almost impossible to use. Abrites in minutes

[jodge]

Mit Colt 07' almost impossible to use. Abrites in minutes


yesterday i made a 2006 colt :D
i can resync the ETACS <--> ECU succesfully, relearn the orig key and add a folding keydiy.

[fred77]

yesterday i made a 2006 colt :D
i can resync the ETACS <--> ECU succesfully, relearn the orig key and add a folding keydiy.


Maybe update last few weeks or just this car. Doing a 2nd key found impossible.



You mean XHorse as KEYDIY doesn't list these yet. Well impressed!!

[fred77]

Nissan Navara 2010 no luck. May of been 2nd posting as had 1 last month.

Truecode

[Manta1600]

few months ago I programed Colt 2007 without problems

Truecode always is my first choice on Nissan models that cover

[jodge]

Maybe update last few weeks or just this car. Doing a 2nd key found impossible.



You mean XHorse as KEYDIY doesn't list these yet. Well impressed!!


Yeah bcose they are chinese companies with twisted brain. Try under Benz.. you will more impressed than ever :D

[jodge]

Nissan Navara 2010 no luck. May of been 2nd posting as had 1 last month.

Truecode


something isn't right with your stuff i made a lot navara with a rectangular id46 key around 2009-2010 (company fleet)

[keymax]

I also have to program a remote key to Saab 9-3 2003 with Cim module.
IM608 can't program by OBD with pincode or by Cim dump?

Just failed on an ‘05 9-3 AKL. Used the tango to add chip. When I went to program a oem key with Autel it just spinned the wheels for 5 mins then failed. Used Tech 2 to teach in no problems. My old MS906 worked on these in the past. Didn’t have it with me.


Sent from my iPhone using Tapatalk

[Manta1600]

Just failed on an ‘05 9-3 AKL. Used the tango to add chip. When I went to program a oem key with Autel it just spinned the wheels for 5 mins then failed. Used Tech 2 to teach in no problems. My old MS906 worked on these in the past. Didn’t have it with me.


Sent from my iPhone using Tapatalk

Add key maybe work but AKL I don't think that any tool can do it by OBD

[lion0304]

Jeep Renegade 2019, use FCA cable read pin and add proximity 4A by xhorse smartkey. IM508 perfect.

FCA cable from odstar X300

[keymax]

Add key maybe work but AKL I don't think that any tool can do it by OBD

Reread my post.
I added a chip like always because everyone on the planet knows AKL is impossible through OBD.
The Autel wouldn’t add the OEM key.


Sent from my iPhone using Tapatalk

[fred77]

something isn't right with your stuff i made a lot navara with a rectangular id46 key around 2009-2010 (company fleet)



truecode is just 1 British guy writing software lol

Yet he does a better job for this Nissan than a dozen Chinese

[fred77]

So guess right in saying AKL lost for VAG group gone.


One of the best features of Autel gone :(
Ok know this is cos server back-door closed but still disappointed


Next question is what happens if don't pay subscription for 6 months.... door stop?

[Manta1600]

So guess right in saying AKL lost for VAG group gone.


One of the best features of Autel gone :(
Ok know this is cos server back-door closed but still disappointed


Next question is what happens if don't pay subscription for 6 months.... door stop?

If Autel stop work on VW MQB AKL what tool can do it on bench?

[Jimmy07]

If Autel stop work on VW MQB AKL what tool can do it on bench?

None it’s online sync files

[Manta1600]

None it’s online sync files

I think that exist solution without sync file - with dash on the bench

[Matronix]

Just did a first 'problem Benz' with Autel in case of no IR read options on defect EIS. OBD and IR adapter were no option. Eeprom diagrams are spot on, read eeprom and flash (just to be sure) and ported it in the donor, all done sweet and nice. Thumbs up and a winner over the 'plug and copy' guys who will run away if it get's any harder then pushing buttons. This is a good extra on Autel in my opinion. This was a W203 (W209 EIS). So good alternative to other Eeprom options.

815205

[DenDroid]

Today I was surprised! The advanced mode item has disappeared from the menu. Accordingly, it is impossible to make AKL on MQB cars. :(
VW Tiguan 2018, Continental

[fred77]

I think that exist solution without sync file - with dash on the bench


yeah saw something on Abrites will check out. Nothing in manuals.

Expect needs a working key still for sync

[Antonio266]

Today's jobs:

-Fiat Doblo 2020 remote Delphi: Pin, precoding, learning all OK
-Fiat 500L 2017 remote Marelli: Pin, precoding, learning all OK
-Fiat Tipo 2017: Pin and precoding FAILED, it says 'impossible to enter programming mode'

I usually use AVDI on FCA vehicles, but for the Doblo 2020 it couldn't read immo data from Bcm, solved with Autel in 5 minutes, but failed on Fiat Tipo, i think i will dismantle Bcm and read it for completing this job..

[key4man]

Peugeot 3008 2017, incorrect pin code reading

[jodge]

Today's jobs:

-Fiat Doblo 2020 remote Delphi: Pin, precoding, learning all OK
-Fiat 500L 2017 remote Marelli: Pin, precoding, learning all OK
-Fiat Tipo 2017: Pin and precoding FAILED, it says 'impossible to enter programming mode'

I usually use AVDI on FCA vehicles, but for the Doblo 2020 it couldn't read immo data from Bcm, solved with Autel in 5 minutes, but failed on Fiat Tipo, i think i will dismantle Bcm and read it for completing this job..


until now i never able to learn Tipo keys with autel. It's always having comm problems with the BSI

[Alpaholic]

VW Touran 2015 AKL ID48 success

[Antonio266]

until now i never able to learn Tipo keys with autel. It's always having comm problems with the BSI
Same for me, it's the second one failed via OBD and solved by dismantling BCM, but i think it's not worth in this way...
I've heard for these keys AVDI is much better, but for now i don't have the update for Fiat Tipo on AVDI.
On Thursday i will have a Fiat 500X with the same MQB key, i will update the post with results..

[alex_r_2001]

2005 Saab 9-3 failed to add key ( I had correct pin code and working key ) Also tried write key by dump with Autel ... to do with CIM with eeprom clip did not work failed

I used VVDI prog and VVDI 2 success. Was able to program Pod key and also used a XT27a super chip for testing to emulate an already programmed key slot success as well ...VVDI prog with eeprom clip adaptor can read write in circuit no need to remove eeprom. Just make sure to short quartz crystal

[mikajna]

2005 Saab 9-3 failed to add key ( I had correct pin code and working key ) Also tried write key by dump with Autel ... to do with CIM with eeprom clip did not work failed

I used VVDI prog and VVDI 2 success. Was able to program Pod key and also used a XT27a super chip for testing to emulate an already programmed key slot success as well ...VVDI prog with eeprom clip adaptor can read write in circuit no need to remove eeprom. Just make sure to short quartz crystal

Why short quartz crystal, to not wake processor? short with some tweezers or solder wire, or need to hook up with those two wires on vvdi prog clip, becide a eeprom clip?

[fred77]

2017 Nevada smart no prog - like many others. expect like Juke code is rejected

[Antonio266]

Fiat 500X 2016 with AES/MQB remote key (not proximity)--->Reading Immo Data and Pincode - Precoding key - Key learning all OK with Autel IM608, job done in 5 minutes.

But it's actually the first one out of three that i've been able to do with Autel, the other two (Fiat Tipo) was impossible to read Immo Data from BCM via OBD.

[alex_r_2001]

Why short quartz crystal, to not wake processor? short with some tweezers or solder wire, or need to hook up with those two wires on vvdi prog clip, becide a eeprom clip?

Without crystal shorted get bad read and write... . I short with alligator clip

[hbt]

Hi guys,

I want to know if Im508 with xp400 pro has the same functions as Im608 with xp400 pro?
Same features and diagnostics and immo ?
And just size different ?

[Manta1600]

Hi guys,

I want to know if Im508 with xp400 pro has the same functions as Im608 with xp400 pro?
Same features and diagnostics and immo ?
And just size different ?

IM508 + XP400 cost half of the price on IM608 are you think that can do the same?

only immo part is the same the diagnostic is the diference

[sleepyrz]

IM508 + XP400 cost half of the price on IM608 are you think that can do the same?

only immo part is the same the diagnostic is the diference

Wrong......

Same shit

Only difference I can tell is the j2534 box

Which you can buy separately anyway.......

Im608 is the same shit with a j2534 box

Again which you can buy separately and is used with laptop anyway
.............

I actually prefer the wired connection of the im508 vs the 608

Same with autopropad lite vs basic

I had the lite and it was shit Bluetooth problems all the time

So i "upgraded" to the basic with direct wire connection

Less problems same programming abilities

[Manta1600]

Wrong......

Same shit

Only difference I can tell is the j2534 box

Which you can buy separately anyway.......

Im608 is the same shit with a j2534 box

Again which you can buy separately and is used with laptop anyway
.............

I actually prefer the wired connection of the im508 vs the 608

Same with autopropad lite vs basic

I had the lite and it was shit Bluetooth problems all the time

So i "upgraded" to the basic with direct wire connection

Less problems same programming abilities

The annual subscription is double

Are you realy think that only the wireless and j2534 is the difference?

[sleepyrz]

The annual subscription is double

Are you realy think that only the wireless and j2534 is the difference?

So what is it?

Show me

[Manta1600]

Come to me with your 508 and will show you

[rapidlocksmiths]

So what is it?

Show me

the immo functions are pretty much the same for key programming , the difference is the diagnostic functions , im608 has far more diagnostic functions included , depends what you want the machine for , the extra cost and subscription cost is for the diagnostic functions .

[Leeetoyo]

Ford ranger usa model 2017 add dealer key, all ok. This was a blade key

[Alpaholic]

VW Tiguan USA 2018 Prox no success.

ZedFull made a precode but could not learn, says battery low in fob. Tried that predcoded fob with autel no success.

Maybe problem with fobs…. Tried xhorse and kdx.

[Antonio266]

Land Rover Discovery 2017 Add Key
Dismantled RFA, wrote new key and deleted the lost one, all OK

[Manta1600]

VW Tiguan USA 2018 Prox no success.

ZedFull made a precode but could not learn, says battery low in fob. Tried that predcoded fob with autel no success.

Maybe problem with fobs…. Tried xhorse and kdx.

KD and XH aren't good for VAG smart keys

its better to use aftermarket

[Ecuprog31]

I never had problems
kd and xh work on mqb cars with Vvdi
always fail with lonsdor
lOnsdor need original or aftermarket keys
I think autel also

[Manta1600]

I never had problems
kd and xh work on mqb cars with Vvdi
always fail with lonsdor
lOnsdor need original or aftermarket keys
I think autel also

Next time when program XH on VAG keyless check the emergency start - For me doesn't work

and if the customer lost the genuine key you can't add new smart key using the existing XH key as you can't switch the ignition on with the emergency coil

[Ecuprog31]

Emergency start work
ive did many mqb all work

[jodge]

Next time when program XH on VAG keyless check the emergency start - For me doesn't work

and if the customer lost the genuine key you can't add new smart key using the existing XH key as you can't switch the ignition on with the emergency coil


if the emergency part isn't working then you can't add the key. Like the Passat B8 you must hold on the emergency area the KD key until the counter changing to 2/2
I've only had problem with aftermarkey keys detections not the KD

[Manta1600]

if the emergency part isn't working then you can't add the key. Like the Passat B8 you must hold on the emergency area the KD key until the counter changing to 2/2
I've only had problem with aftermarkey keys detections not the KD

Work only 1 time to add the key - After that no emergency start with this key also is not possible to be programmed 2nd time until renew it

I wrote a thread about this problem few months ago on Fabia

I wasted 2 days with this car and I'm prity sure that is not possible to have emergency start with XH keys - I tried with few XH keys and checked many times with all existing to this moment MQB smart keys versions on XH

[lion0304]

Does someone has worked with Autel 8A H AKL cable on Toyota EU?

[Manta1600]

Does someone has worked with Autel 8A H AKL cable on Toyota EU?

As I know not work on EU cars

[sleepyrz]

Does someone has worked with Autel 8A H AKL cable on Toyota EU?

China cars only I think

[DenDroid]

Today was tryed VW Atlas 2020, AKL.

Read immo - 100%, Calculate immo - FAIL! :(

Tomorrow will try again

[K1nd3r]

Today was tryed VW Atlas 2020, AKL.

Read immo - 100%, Calculate immo - FAIL! :(

Tomorrow will try again
do not try, 5c key system

[DenDroid]

Are you saying that MQB49 cannot be done in any way?

[Manta1600]

Are you saying that MQB49 cannot be done in any way?

I think is not possible with the Autel at the moment - I saw some videos with VVDI2 add key

[DenDroid]

I think is not possible with the Autel at the moment - I saw some videos with VVDI2 add key

Yes. But need to calculate immodata. Who can?

[Antonio266]

BMW X1 2012, CAS3++ encrypted (not ISTAP version) programmed new semi-smart key via OBD, all ok

[fred77]

Nissan Navara 2016+ smart fob - same as Juke.
Gets further than other tools (accepts pin) - but no joy.

Worrying thing is seemed to affect steering lock but eventually re-learned itself.

[lion0304]

Does someone use AUtel on late PSA AES system AKL?

I've a C3 AIrcross 2019 key lost, im508 identifie OK, but fail read pin even X100 Pad2, X300 pro4 all failed.

Make diagnose ECU and BSI doesn't detected. In programming, see BSI but ECU show -!-

[rapidlocksmiths]

Nissan Navara 2016+ smart fob - same as Juke.
Gets further than other tools (accepts pin) - but no joy.

Worrying thing is seemed to affect steering lock but eventually re-learned itself.

ive done a few of these fred77 with truecode without issue , coding as a juke , be aware that you dont always get feedback from the software that the pin is accepted but it has been and will be in programming mode so just cycle keys in as you would on juke , screen doesnt always prompt you to do this but its in programming mode so cycling keys works a treat with truecode .

[Manta1600]

Does someone use AUtel on late PSA AES system AKL?

I've a C3 AIrcross 2019 key lost, im508 identifie OK, but fail read pin even X100 Pad2, X300 pro4 all failed.

Make diagnose ECU and BSI doesn't detected. In programming, see BSI but ECU show -!-

I failed twice - C4 smart key - AKL
Crossland add key - read pin code OK can't add key
but this was few months ago

After that I bought PSA for TDB1000 but still don't have AKL to try

[DenDroid]

Today Chevrolet Trax 2017 AKL Smartkey - Done! 25 min job.

[madaxe]

Renault Trafic 2016 prox key, spare key. Autel read flash, wrote flash, prepared key, then failed at key programming. Tried again with new key first, still failed.
Abrites worked, but not with the Autel prepared key. I guess their precoding doesnt work as well as they though.

[lion0304]

Renault Trafic 2016 prox key, spare key. Autel read flash, wrote flash, prepared key, then failed at key programming. Tried again with new key first, still failed.
Abrites worked, but not with the Autel prepared key. I guess their precoding doesnt work as well as they though.


Weird Traffic AES i did with X300 pro4 without prepare anything. W/R flash and programming all about 25 minutes with battery support.

[amar28]

Anyone know if IM608 works to add key on Prius UK version 2016+ Prox and if goes OBD

[jaelgti]

Hello colleagues, does anyone know if the remote control of VOLVO C30 DEL 2007 can be programmed?
Greetings DK

[drugowaz]

No.........

[Manta1600]

Anyone know if IM608 works to add key on Prius UK version 2016+ Prox and if goes OBD

Yes no problem to add key

[MDenV]

Hi guys,

I want to know if Im508 with xp400 pro has the same functions as Im608 with xp400 pro?
Same features and diagnostics and immo ?
And just size different ?
The answer is in the attachment.

[okuser1]

Does the server work for vw lost keys immo4 system?

[Manta1600]

Does the server work for vw lost keys immo4 system?

Must work try and report

one week ago I programmed Golf 6 2010 with OBD helper so I asume that if the Helper still work the Autel also will work

[rapidlocksmiths]

i spoke with abrites distributor with reference to vw server , they said server sometimes working sometimes not , its pot luck

[jodge]

Autel started a manual procedure for VAG, slow but working
https://3dgroupuk.com/uploads/uploads/files/VW%20advanced%20mode%20key%20learning%20process.pd f
currenty is free if your stuff came from 3D

[drugowaz]

What is purpose of this if you cant read data on mqb.
For nec older totaly useless

[Jimmy07]

2018 Peugeot 3008 prox AKL

Smart pro fail
TDB 1000 fail

Autel succeeded after multiple attempts

[amar28]

Astra J 2010, read pin failed

boiled my piss that did

£200 tools can do astra J, Autel need to sort out the pin reading on Vauxhall

[Manta1600]

Astra J 2010, read pin failed

boiled my piss that did

£200 tools can do astra J, Autel need to sort out the pin reading on Vauxhall

Never had problem on Astra J

[amar28]

tried all the options for pin reading, kept failing, have heard from others also the vauxhall pin read is a bit sketchy, read with smok 30 seconds, programmed with autel 12 mins

[Manta1600]

tried all the options for pin reading, kept failing, have heard from others also the vauxhall pin read is a bit sketchy, read with smok 30 seconds, programmed with autel 12 mins

Yes regulary have problems to read the pin on some Corsa E and Moka and Corsa C

before had problem with Astra H and Corsa D

but never had problem with Astra J - use the auto mode with USB cable and good internet connection

[amar28]

Yes was using wired and net, didnt want to read, astra H & corsa D, Zafira B, primarily use smok for pin, never failed me yet

[ranchero]

2009 Chevrolet Aveo (Canada), add key FAIL - "can't communicate with engine ECU". Added remote though.

[Manta1600]

Fail on Renault Master 2013 - Can't reed the pass

[fred77]

------------------------------------------

[Matronix]

@Manta
"Yes regulary have problems to read the pin on some Corsa E and Moka and Corsa C

before had problem with Astra H and Corsa D

but never had problem with Astra J - use the auto mode with USB cable and good internet connection "


Also other way around. Older Meriva etc reads pin correct but won't program. Since Opel is not full proof I didn't dare programming newer Mokka, Corsa E, Adam etc. with Autel yet. So far kept it to the save Abrites programming. However, that tool keeps giving a immo error in the dash with these tools (have to remove battery for about 10 minutes at least to get it fixed) due to mixup in the BCM (code not programmed it says). Are the newer Opel cars good with Autel as I understand from you guys? At least on programming? Pin you can get with several other tools.

[fred77]

@Manta
"Yes regulary have problems to read the pin on some Corsa E and Moka and Corsa C

before had problem with Astra H and Corsa D

but never had problem with Astra J - use the auto mode with USB cable and good internet connection "


Also other way around. Older Meriva etc reads pin correct but won't program. Since Opel is not full proof I didn't dare programming newer Mokka, Corsa E, Adam etc. with Autel yet. So far kept it to the save Abrites programming. However, that tool keeps giving a immo error in the dash with these tools (have to remove battery for about 10 minutes at least to get it fixed) due to mixup in the BCM (code not programmed it says). Are the newer Opel cars good with Autel as I understand from you guys? At least on programming? Pin you can get with several other tools.


Abrites best.
Immo error self clears ~ 30 minutes.

Don't make life differcult for yourself :)

[tenzen]

Someone get pin or cs on audi a6 4f from obd port with im608? Without dismantling j 518,of course...Tried various ways,i have one key with dead remote and want to program another.

[Manta1600]

Someone get pin or cs on audi a6 4f from obd port with im608? Without dismantling j 518,of course...Tried various ways,i have one key with dead remote and want to program another.

I usually use VVDI2 on them but if the car is up to 2008 I think that Autel also will read the CS and PIN from engine ECU without need to take out the steering

[Manta1600]

Abrites best.
Immo error self clears ~ 30 minutes.

Don't make life differcult for yourself :)

I'm not AVDI fen and never had situation on Vauxall to can't read and program the keys - if Autel fail then Truecode and Smart Pro do the job

[okuser1]

Vag help file work whith im608 /508 for Akl?

[MACAN]

Someone did clio or captur Lately, many have had failures since the last update

[igorr]

Today polo 2016
Fail to read immo data tray all solutions
Can not conect with ecu check connection and voltage thats message
I used im508 and xp200 programmer

[ranchero]

2017 Infiniti QX60, add key FAIL. Followed screen instructions precisely. Was able to program ONE key, either original or new, could not add second key. Programming of first key goes well, then appears screen telling that one key is programmed and two options - 'add" or "next (step)". When i click "add" and try to program second key - nothing happens, car does not see second key. So after programming just one key is working.
AutoProPad did even worse - showed "success" for both keys, but at the end - both keys are not working, no tool communication with the car either! I was totally pissed off at this point, you can imagine how much adrenaline I've got. Managed to bring car back to life with im608, "ECM match" or something like that.

At the end I've tried Autek iKey 820, it programmed 2 keys on the first try, EASY! So not always expensive tool is the best. May be screen instructions of im608 are inaccurate or incomplete, who knows.

[fred77]

It's lack of testing.

Software realised in a rush to market. Just don't trust the Chinese tools as much

[mjoesen]

Ford Transit Custom 2020 - add key ok (must have internet connection)

Skoda Octavia 2019 non keyless - failed to add key, coul not read dash (Avdi failed to, could not relese SA2 security)

Both cars with IM508

[metallo]

Hi! i've recently bought IM608 with xp400 pro, i wanted to read a mc68hc908az60 micro following diagrams on autel but xp400 pro fails to connect to the chip where upa reads good (connecting 3 other wires), other chips tried: 9s12 read ok, eeproms 93/95/24 ok, keys id ok, do you have the same issue with mc68hc908 family or is there something i miss?

[Manta1600]

Hi! i've recently bought IM608 with xp400 pro, i wanted to read a mc68hc908az60 micro following diagrams on autel but xp400 pro fails to connect to the chip where upa reads good (connecting 3 other wires), other chips tried: 9s12 read ok, eeproms 93/95/24 ok, keys id ok, do you have the same issue with mc68hc908 family or is there something i miss?

Just don't expect that all will works - if work OK if not work try the next tool

[metallo]

Just don't expect that all will works - if work OK if not work try the next tool

Ok thanks! the infos and pinout were so detailed it seemed almost impossible it didn't work!! :D

[Alpaholic]

Got a customer with a Suzuki Swift 2015 no prox. Is it possible to read pin with im508?

[jodge]

Got a customer with a Suzuki Swift 2015 no prox. Is it possible to read pin with im508?


as far as i remember, you must be online and the pin calculation done with the autel server. All on obd

[Alpaholic]

Suzuki Swift 2015 AKL 5 min job - success

[fred77]

Ford Transit Custom 2020 - add key ok (must have internet connection)

Skoda Octavia 2019 non keyless - failed to add key, coul not read dash (Avdi failed to, could not relese SA2 security)

Both cars with IM508

2019 seems year security was updated

[autochei]

from where u buy remote for swift

[Alpaholic]

from where u buy remote for swift

Customer only wanted transponder-keys without remote, but i saw a lot of remotes on kdx and xhorse.

[metallo]

Land rover discovery 2017 add key rfa bench read write OK
added kdx zb key programmed as id49 landrover
cool!
edit: (with im608)

[jodge]

from where u buy remote for swift


orig suzuki available in mk3 for sure, sometimes is out of stock but if you choose the "for indian market" or similar it will be fine. (as far as i remember only the tp is different in EU it's 7936 in India it's 4D65)

[Antonio266]

Someone has tried the new function for reading Immo Data on bench in PCR2.1?
I've seen it's been added in the last VW Immo update..

[lion0304]

orig suzuki available in mk3 for sure, sometimes is out of stock but if you choose the "for indian market" or similar it will be fine. (as far as i remember only the tp is different in EU it's 7936 in India it's 4D65)

SWIFT 2015 sure is iD46 7961 T68L0. Use PCF7946 doesn't work.

[Alpaholic]

I used xhorse universal tp.

[jodge]

yepp, for eurpean markets it's for 7936. But some Indan swifts are using 4D65 tp (not 7946 like in your post) everthing else it's the same. I already bought some of orig suzuki keys (for indian markets only or something like that) and the remote part and the blade is the very same. I replaced only the tp to 7936.

[Alpaholic]

Ford Kuga 2019 prox - add key success with xhorse remote.

[Alpaholic]

Chevrolet Orleando 2012 blade key - success.

[rokibar]

Today tried ad key golf7 with vdo cluster with autel im508 and xp200. Device can't read immo data at any sections. Someone did it successfully?

[ray-ray]

Corolla with aes smart key 2019 can now be done using the g-Box and read Eeprom . 93lc86 is the target Eeprom behind the glove box is the module. I will try and test there calculations, I’m thing the location will be easy to figure out since it a rolling number.

[Weasel3]

Corolla with aes smart key 2019 can now be done using the g-Box and read Eeprom . 93lc86 is the target Eeprom behind the glove box is the module. I will try and test there calculations, I’m thing the location will be easy to figure out since it a rolling number.

I guess this is only US market ?

[mark07]

Seat MII 2018 all key lost - sucses

[okuser1]

BMW Ews3 - FAIL TO READ

[MBSERVICENORWAY]

Can autel im508/608.

Reset immobox 2011 peugeot 107/toyota aygo?

Or do i need to remove immobox and write by dump to add key when Akl?

[Manta1600]

Can autel im508/608.

Reset immobox 2011 peugeot 107/toyota aygo?

Or do i need to remove immobox and write by dump to add key when Akl?

Must read on bench and program chip from dumb

[MBSERVICENORWAY]

Are you sure? I checked the menu, it show oeugeot 107. And you could clear keys and then start key learning?
Also function for reset immo box��

[lion0304]

Are you sure? I checked the menu, it show oeugeot 107. And you could clear keys and then start key learning?
Also function for reset immo box��


If you don't believe what Manta said, just try by youself. EASY

[MBSERVICENORWAY]

If you don't believe what Manta said, just try by youself. EASY


I belive him. But im just curios why autel has solution for akl if it doesnt work?��

Will try when i get to the car��

[Manta1600]

I belive him. But im just curios why autel has solution for akl if it doesnt work?��

Will try when i get to the car��

Offer price like for OBD programming and then enjoy

https://www.youtube.com/watch?v=Ik0M8WEJz6w

[key4man]

suzuki crossover 2019 smart key ,(61M),add key ,success.

[batbatdieu]

Hyundai Santafe 2019:
Function execution failed.
Smartkey security has not been released.
It mean IM can not communicate with car or subscribe expired ?

[metallo]

Hi!! does anyone know the pinout of gbox2+db15 on vci obd im608? i don't have gbox2, i have another breakout box.. thanks

[Alpaholic]

Toyota Corolla 5/2021 smart key - no success. Can not communicate with ecu. ZedFull also no success. „Can not read eeprom“. But i made a 2019 smartkey with ZF before.

[Matronix]

@Rodibar - "Today tried ad key golf7 with vdo cluster with autel im508 and xp200. Device can't read immo data at any sections. Someone did it successfully? " "


Had a Polo , same issue, at one time seemed to enter reading with waiting time but after security access failed still... VVDI no go either however so think it's a VAG Helper thing (if that still works). Did not have it with me so could not try

[Weasel3]

@Rodibar - "Today tried ad key golf7 with vdo cluster with autel im508 and xp200. Device can't read immo data at any sections. Someone did it successfully? " "


Had a Polo , same issue, at one time seemed to enter reading with waiting time but after security access failed still... VVDI no go either however so think it's a VAG Helper thing (if that still works). Did not have it with me so could not try

OBD helper is not working no more.
Even with VW brand.
Have several tokens, but no request on VW earlier. With the need of those.
So now they are wasted.
I needed them this week. Several VW cars with AKL.
But not working anymore.

[rapidlocksmiths]

yes its sad this no longer works , but it was always going to be the case .

as soon as people started flooding ebay and facebook with cheap keys and cheap jobs making them look a rip off , they was always going to act . sadly those in the trade only have themselves to blame for this by flooding the net with silly cheap prices and pictures , many in this industry are their own worst enemy , but very good for the mqb guy and those that can offer this service , so excellent for some

[MACAN]

Qashqai 2017 add bladeKey OK , XH REMOTE

[tepSIJA]

Ford Kuga 2016 OK, keyless go, Xhorse Smart key programed and SuperChip for emergency start , all obd, 5 min job.

[lion0304]

yes its sad this no longer works , but it was always going to be the case .

as soon as people started flooding ebay and facebook with cheap keys and cheap jobs making them look a rip off , they was always going to act . sadly those in the trade only have themselves to blame for this by flooding the net with silly cheap prices and pictures , many in this industry are their own worst enemy , but very good for the mqb guy and those that can offer this service , so excellent for some

I think that is a good news to avoid easy and cheap solution.

Now to do AKL, need more than plug an OBD and press Next then OK

[Manta1600]

I think that is a good news to avoid easy and cheap solution.

Now to do AKL, need more than plug an OBD and press Next then OK

Its good if you can program by self

If you must pay on MQB guys I don't think

I used their service 2 years ago when this just started - was Ok

But you don't have any waranty that the key will work but must pay for the service in advance

Now I refuce these jobs

[lion0304]

Its good if you can program by self

If you must pay on MQB guys I don't think

I used their service 2 years ago when this just started - was Ok

But you don't have any waranty that the key will work but must pay for the service in advance

Now I refuce these jobs

Sorry but i'm not talking about MQB AKL this stament.

If Market price go down, it' because all the tools can use by the button's pressing.

[igorr]

Sorry but i'm not talking about MQB AKL this stament.

If Market price go down, it' because all the tools can use buy the button's pressing.

yes you can add or do all lost keys by button for 2000eu
couple years ago you nead to read mcu then with zedbull tmpro2 add key
key cutting how many pictures on dk PLEASE GIVE ME KEY CUTTING from lock or car key
equipment is too CHEAP
so today every car mechanic,car paint and hawker can made keys

[lion0304]

yes you can add or do all lost keys by button for 2000eu
couple years ago you nead to read mcu then with zedbull tmpro2 add key
key cutting how many pictures on dk PLEASE GIVE ME KEY CUTTING from lock or car key
equipment is too CHEAP
so today every car mechanic,car paint and hawker can made keys

I'm still be sure who deal with eeprom still stay in the field for long

In my case, my job every day is automotive electronique, sometime need solve a car non starting after the pressing buttons has failed.

And by the way, i charge loudly the bill.

[gttuning]

Guys so whats the solution now for AKL on MQB ?? Only sync.file??

Sent from my SM-G955F using Tapatalk

[fred77]

MG E-ZS 2021 failed ... with Security Authorization failed message

[DenDroid]

Jeep Compass 2021 - fail

Can't read PIN.

Need solution for this car.

[lion0304]

Jeep Compass 2021 - fail

Can't read PIN.

Need solution for this car.


Force cable or FCA 8+12 cable?

[DenDroid]

Force cable or FCA 8+12 cable?


Of course it was used (FCA 8+12). I can read the block numbers and the number of keys, I can erase errors, but I can't read pin.

One day ago was learned key to Compass 2019 witout any problems. 2021 - FAIL

[camelgd]

APP won't work either according to supported cars website. No pin or programming. Must be new algorithm in 2021.

[jodge]

2007 Peugeot 207 pin code reading with exist key failed. It was hillarious :D

[Manta1600]

2007 Peugeot 207 pin code reading with exist key failed. It was hillarious :D

There is bug on 207

Try under 207 CC and will be OK

[lion0304]

By Model fail try other modele or system alway work.

The job is not simply clic and go.

[jodge]

normally i using my TDB for PSA and after more than two years it was my first pin code reading with autel. And failed :) yes i know they are the very same with any other PSA modell :) Thx

[Alpaholic]

Audi A3 2010 success

[drugowaz]

...............

[MBSERVICENORWAY]

Anyone here tryed to read immo/coding from benz ecu? And then write this data in new ecu? Will this clone the immo info in ecu?

[jodge]

Anyone here tryed to read immo/coding from benz ecu? And then write this data in new ecu? Will this clone the immo info in ecu?


yepp it worked the coding too tested on Sprinter 2007 CRxxxx something

[MBSERVICENORWAY]

yepp it worked the coding too tested on Sprinter 2007 CRxxxx something

thanks for info. thats good to know :) will make cloning ecu easier for me :)

[IanBMW]

2013 REN Clio4 Petrol AKL
AES Card key Success
used battery stabilizer

[fred77]

Failed 8 digit pin reading/conversion Suzuki Vitara 2017
Gave 3 options all failed

Online server failed to get 8-digit pin also

[antekusa]

2013 Audi A4 B8.5: Read PIN + Add Key (Original) = Success (< 5 minutes) OBD
2004 SL500 R230: Add Key (Chinese Clone) = Success (30+ minutes) OBD

[donesko]

can im608 reset fem mileage ?

[pepi]

You cant reset mileage with IM608.

Sent from my SM-G986B using Tapatalk

[darknezz19]

Can we precode transponders with just XP200 if using another device to read eeprom data or only XP400?

Edit: Apparently xp200 can do precoding if you use another dives to read like vvdi2. Ended up buying xp400 and gbox2 anyway.

[mikajna]

Can we precode transponders with just XP200 if using another device to read eeprom data or only XP400?

Edit: Apparently xp200 can do precoding if you use another dives to read like vvdi2. Ended up buying xp400 and gbox2 anyway.Yes you can, put dump on usb memory, and put usb memory direct in im508 usb port...then tranfer dump to autel local memory.

But xp200 has huge limitations...he can prepare only some transponders, id46, id48 maybe few mores transponder id's.

Tiris dont work, I've try few of thems 4d60, 4d62, 4d63...cant unlock tiris toyota

Послато са SM-A725F помоћу Тапатока

[Weasel3]

Yes you can, put dump on usb memory, and put usb memory direct in im508 usb port...then tranfer dump to autel local memory.

But xp200 has huge limitations...he can prepare only some transponders, id46, id48 maybe few mores transponder id's.

Tiris dont work, I've try few of thems 4d60, 4d62, 4d63...cant unlock tiris toyota

Послато са SM-A725F помоћу Тапатока

On the IM model.
At least for the 600/608.
There is a hidden MiniSD slot.
Under the battery cover. (quite happy, when I found this one).

So easy to transfer files, between a computer.
Best with USB- MicroSD adapter.
Then good to read dump, with IM programmer.
And maybe do some work with the VVDI2.

But not so easy to navigate the file system on the IM pad. I wish it was better.
But is possible to search name, to find the files.

[mikajna]

On the IM model.
At least for the 600/608.
There is a hidden MiniSD slot.
Under the battery cover. (quite happy, when I found this one).

So easy to transfer files, between a computer.
Best with USB- MicroSD adapter.
Then good to read dump, with IM programmer.
And maybe do some work with the VVDI2.

But not so easy to navigate the file system on the IM pad. I wish it was better.
But is possible to search name, to find the files.I was found on local im508 memory user folders where are placed dumps, and make that folfer as favorite...than when open usb stick memory on im508 make copy dump, and when need to navigate I use favorite location, and copy/move dump from usb stick memory, in folder where autel will store when read it. For example, in FIAT folder place fiat bcm dump.

When autel open file manger to navigate me to choose dump, dump is there like that autel read it.

Послато са SM-A725F помоћу Тапатока

[jodge]

no need to play with sd nor usb stick. You can connect your PC and your 508 the the mini usb cable (marked OTG) it should be appearing under "This PC" --> "Devices and drivers" --> "IM508"
looks like in the picture but not ASUS obviously
850659

edit:

and the path is:
im508 --> Nand flash --> Scan --> UserData -->

[ray-ray]

New update for Toyota.

OtoSys IM600 IMMO_Toyota V3.72 2021-11-24


Toyota:
Adds Add Smart Key, Erase Smart Key, PEPS Reset, Back up IMMO Data and Generate Analog Key functions for 4A smart key-equipped models of 2021 below: Corolla (fuel/HV), Corolla Touring (fuel/HV), Corolla Sport (fuel/HV), Corolla Cross (fuel/HV) and Levin (fuel/HV). [First released password-free functions]

[Alpaholic]

Fiat Ducato 2020 -no success. Can not read eeprom. Possibly a model with sgw?

[fred77]

Read server is/was down for 3 days. amazing guess we stop work

[rapidlocksmiths]

Fiat Ducato 2020 -no success. Can not read eeprom. Possibly a model with sgw?


2020 is a cross over year between last of the old and first of the new systems , the ducato doesnt have SGW , it is though a new system that no one has cracked and released yet , but definitely does not have sgw.

ive had 2020 and 2021 registered ducato motorhomes code in without issue , ive also had 2020 models of ducato on new system that have failed , this isnt surprising as many motorhomes are earlier built models before being built into motorhomes.

until the new system is cracked , no aftermarket tools will work for keys

[rapidlocksmiths]

Read server is/was down for 3 days. amazing guess we stop work

yes reported to be down until sometime on friday , so saturday to be safe

[Alpaholic]

Did somebody made a Smart 453 year 2019 with Keydiy ZB Smart Key 3-button remote?

[super jumbe]

I just cannot make my mind up buying this tool if Golf 7 with VDO cluster can't read immo data with IM608 the tool is useless.....