Audi A4 B8 BCM 2 No Ignition after crash

[dij16]

Hi all I have problem with A4 B8. After crash car wont start, no ignition at all. Vcds in 05 Start auth has fault:
02811 - Control Module for Electronic Steering Column Lock J764
014 - Defective
Erase and on next ignition try, fault came again.
I tried to disable ELV with fvdi but no succes.
Does I need to read 95320 from BCM2 to repair, or what?

[Ladis]

CAN Bus communikation glitch

[brend]

What did it look like?


Hi all I have problem with A4 B8. After crash car wont start, no ignition at all. Vcds in 05 Start auth has fault:
02811 - Control Module for Electronic Steering Column Lock J764
014 - Defective
Erase and on next ignition try, fault came again.
I tried to disable ELV with fvdi but no succes.
Does I need to read 95320 from BCM2 to repair, or what?

[dij16]

In FVDI in readaptation process of BCM2 it asks me to disable elv, i click Yes.

[dij16]

In BCM2 there is no external eeprom, only nec. I have upa clone, xprog, fvdi, r270, carprog. No ones can read this nec? Only way is to readapt the other BCM2? Or problem is somewhere else?

[dij16]

My module is BCM2 2.0 H05 0435
8K0 907 064 CC

Which sgo file i need to reflash it with odis? 0435 or some other?
8K0907064___0134_S.sgo
8K0907064___0141_S.sgo
8K0907064___0145_S.sgo
8K0907064___0146_S.sgo
8K0907064___0247_S.sgo
8K0907064___0251_S.sgo
8K0907064___0252_S.sgo
8K0907064___0321_E.sgo
8K0907064___0321_S.sgo
8K0907064___0323_S.sgo
8K0907064___0324_S.sgo
8K0907064___0326_S.sgo
8K0907064___0327_S.sgo
8K0907064___0328_S.sgo
8K0907064___0430_S.sgo
8K0907064___0431_E.sgo
8K0907064___0431_S.sgo
8K0907064___0434_E.sgo
8K0907064___0434_S.sgo
8K0907064___0435_S.sgo
8K0907064___0437_S.sgo
8K0907064___0530_E.sgo
8K0907064___0530_S.sgo
8K0907064___0633_E.sgo
8K0907064___0633_S.sgo
8K0907064___0711_S.sgo
8K0907064___Z203_S.sgo

[caliskan71]

solution: bcm to elv synchro or elv disable in bcm dump..sgo will not help you

[dij16]

Can FVDI disable ELV by re adaptation process of BCM2?

[firestator]

It’s better to give the car to a real master ... Do not torment the client ... If you had a mind you would read the previous topics, and not create a new one

[dij16]

solution: bcm to elv synchro or elv disable in bcm dump..sgo will not help you
Which programmer I need to buy for read and write dump from BCM2? I can buy Orange5 clone, can it be enough for this job? Inside is D70F3634 without external eeprom.

[ASCM]

Hello Did you solved?

Sent from my SM-J415F using Tapatalk