Corsa D problem Immo

[serviclau]

Hi.
I have opel corsa D and car not star engine is a Z14XEP
In diagnostic engine say me this tow errors:
P1632-00 incorrect trasnponder key
P1679-00 identification of the level of the emissions received incorrectly BCM
I reporgram keys and reset bcm and ecu engine and same. Erase keys and program and same.
Now I read BCM eeprom, is a 93c86, and tried open with tango in program fiat and unknow version, in opel not have 93c86.

Wait answers.
Thanks.

[serviclau]

any idea for this?

[Panathaole]

car have battery drain? Have you check the battery voltage?

[serviclau]

yes battery is ok now

[Saab A Dalys LT]

Read the MCU and know more

[Stelaras26]

Same faults after reprogramming keys?<br>Did you program vin also in bcm?Check faults in dash and other ecu too

[serviclau]

I chek fault in dash, airbag and say me immobiliser error, but erase ok. But in engine cant erase.
I reprogram keys and program vin in bcm but same.

[serviclau]

or any immo off for this?

[Stelaras26]

If i were you,and had the correct pin code ,i would start from the beginning...
Reset in bcm/dash/ecu/and everything else that has the option-vin and immo

then write immo code ,vin id and check.
if you erase faults in some ecu and then they never come again,they were old or not permanent.
I think p1632 is the reason that car does not start

No immo off for opel petrol ecu

[serviclau]

ok, i try and comment results

[Panathaole]

Read here, follow the procedure, and everything should work fine..

https://www.digital-kaos.co.uk/forums/showthread.php/768027-Opel-Corsa-d-can-t-reset-ipc?highlight=Opel+Corsa+pin

[serviclau]

I realice this prcedure and reprogram keys but same faults.
I buy a kit ( ECU, BCM, STERING, DASH, KEYS), but say me same error in ECU.
Any idea for this??

Thanks.

[gsmrepair]

check battery voltage on live data from ecu, can be a missing voltage.

[Bllinda]

Are you sure? The fault is somewhere else


I realice this prcedure and reprogram keys but same faults.
I buy a kit ( ECU, BCM, STERING, DASH, KEYS), but say me same error in ECU.
Any idea for this??

Thanks.


Read the MCU-n.e.c and know more

[serviclau]

yes but i don't know

[Bllinda]

I realice this prcedure and reprogram keys but same faults.
I buy a kit ( ECU, BCM, STERING, DASH, KEYS), but say me same error in ECU.
Any idea for this??

what was wrong with the original kit?


yes but i don't know

[serviclau]

i don't know, say me errors in ecu from immobiliser, and change all modelule, (ECU, BCM, COIL, DASH) but with this new kit say me same errors in engine ecu.
And I think problem is other, but I revise fuse box and all is ok, and I don't know any idea.

Thanks.

[serviclau]

SOLVED. CAR STAR.
I remove ecu airbag and read 95160, in two ecu airbag detect crash, and I realice clear crash and write VIN and car star.

Thanks all for help.

[volorucinski]

Hello, thanks for reply!

[serviclau]

I have little problem.
It's possible change configuration for this ecu airbag?
I need change right side to left side, I try with op-com but not possible because say me ecu is locked.
I post file.

Thanks.