MINI R56 CAS3 NEED flash DUMP REPAIR

[PSAXSEVOLUTION]

Hi guys please my cas 3 is dead after fail programming
MINI R56
CAS3 61.34-9147184-01
CPU 0L15Y

I have no ignition lights,,says faulty cas on dtc

Many thanks in advance

[Lambda1]

and where is data? or did you want files to write and sync... later?

[PSAXSEVOLUTION]

Yes,,correct
I have no ignition power on CAS,,,Seams flash is been deleted..
My problem is terminal 15,,,when I insert the key as no power on CAS...

ECU Mini Cooper D R56 1.6 80kW 9HZ 2007 0281014295 7808778
CAS61.35-9147184-01

[doctore]

...........tr this

[PSAXSEVOLUTION]

this is not ok....too small

[doctore]

and what size you need

[PSAXSEVOLUTION]

eeprom.bin 4kb
flash.bin 2048kb

I have xprog box to write it...

can you help me please with this original flash..
I have no ignition power on CAS,,,Seams flash is been deleted..
My problem is terminal 15,,,when I insert the key as no power on CAS and ELV...

ECU Mini Cooper D R56 1.6 80kW 9HZ 2007 0281014295 7808778
CAS61.35-9147184-01
CPU 0L15Y

[Degi256]

hi what do for kill cas

[PSAXSEVOLUTION]

readings made today by vvdi prog

Can anyone correct the eprom and flash...
I have no signal when insert key,,Only airbag light cames up,,,the rest nothing

Need big help please

[doctore]

bay tools to write deferent size when you need it,
if i faind xprog format i will give you later:)

[PSAXSEVOLUTION]

A friend on garage kill it programming with ista-p,,the stupid man programm it without KL15,,,of course at the end does not code it because the kl15 line is not detected...
Mickey mouse garage shop...

No one as flash dump for this cas?

ECU Mini Cooper D R56 year2007 1.6 80kW 9HZ 2007 0281014295 7808778
CAS3 61.34-9147184-01
CPU 0L15Y

[doctore]

tr it not from same cas,
but you dont have nothing to lose

[PSAXSEVOLUTION]

Thanks

You are the only person willing to help me,with so many Gurus on here no one is helping.
I will try it and let you know the result,,since I have nothing to loose like you said..
I will find solution in the end & I will post the result to you...Nothing is impossible to achive

Br
Psa

[doctore]

in future you can by here llitle more on dk and you will get quick help from many members;)

[PSAXSEVOLUTION]

solved......CGDI solved my problem with kl15,,no power at CAS ...
Car is running now but as a problem with EPS/ELV...

CGDI bmw solved the problem with kl15,,connect the tool and read the keys and made downgrade on soft....this way lets you detect the kl15 line on cas....
As soon it starts to downgrade will make a noise on central electric on the foot right side...Relé will make a click and you ready to go....
I wait about 3 minuts to downgrade the software of cas by OBDII and after that lights on dash came up again...


Just info:::CGDI BMW is very good for keys and cas...top on minis...

Info add on 19-12-2019
I find a way of turning the kl15 ON when all dash have no lights or key is not turning ON 2 POSITION(Ligths on dash)
Normally when you insert the key and you have no ligths on ignition,,,means the car is dead or in boot mode....
If you put a diagnostic tool the result is no communication with DME and other modules like CAS,ELV,JBC,ETC

Try the same way on 4 cars,,BMW f30 ,mini r56,BMW f10, BMW e60....the result is the same,,works 100%...

[kaleval]

KL15 error could be innuficent power supply for CAS module. Check the big connector, specialy the big pins at cas side.

pin 21 no connection can cause ELV faulty during car sleep. Thats fit for the behavior like put key in and stuck at ACC level, no ignition. After ELV reset will have ignition but KL15 error in DME and SZL stays in sleep mode, no power steering.

btw posted flash is looks fine.

Regards.



solved......CGDI solved my problem with kl15,,no power at CAS ...
Car is running now but as a problem with EPS/ELV...

CGDI bmw solved the problem with kl15,,connect the tool and read the keys and made downgrade on soft....this way lets you detect the kl15 line on cas....
As soon it starts to downgrade will make a noise on central electric on the foot right side...Relé will make a click and you ready to go....
I wait about 3 minuts to downgrade the software of cas by OBDII and after that lights on dash came up again...


Just info:::CGDI BMW is very good for keys and cas...top on minis...

Info add on 19-12-2019
I find a way of turning the kl15 ON when all dash have no lights or key is not turning ON 2 POSITION(Ligths on dash)
Normally when you insert the key and you have no ligths on ignition,,,means the car is dead or in boot mode....
If you put a diagnostic tool the result is no communication with DME and other modules like CAS,ELV,JBC,ETC

Try the same way on 4 cars,,BMW f30 ,mini r56,BMW f10, BMW e60....the result is the same,,works 100%...

[weld88]

Your posted eeprom shows "C1 00 00" at offset 0xF90 Try changing that to "FF FF FF" and test it.

See : https://www.digital-kaos.co.uk/forums/showthread.php/743194-NEED-Flash-Cas-3-61-35-9227053-01/page2?highlight=0F90

[vivianc]

Hi Psa

Please can explian how you got it sorted as i am sitting with the same problem where the dash lights is not coming on and the car does not want to unlock the steering lock

thanks in advance