View Full Version : Swirl off edc16c39
James83
8th February, 2020, 08:00 PM
Hi, samoone can do swirl off in edc16c39 thanks and rep will added. please
dehacko
8th February, 2020, 08:11 PM
when you do mechanical swirl off and not disconnect connector. you don't have to do software off
but you may know :)
James83
8th February, 2020, 11:38 PM
when you do mechanical swirl off and not disconnect connector. you don't have to do software off
but you may know :)
I know, but is possible remove from map too. I will remove from map if is possible.
dehacko
9th February, 2020, 07:31 AM
Ok i understand. they need to be removed mechanically for sure, because as they can get damaged and get into the engine.
Two engines have already been damaged by our customers
James83
10th February, 2020, 08:59 AM
Someone can tell me address for do swirl off in edc16c39?
mancioks
10th February, 2020, 01:01 PM
You need it just dissable or full remove? To dissable check last map what winols find in a file 16x14 or smth simillar :)
pike
10th February, 2020, 01:12 PM
Someone can tell me address for do swirl off in edc16c39?
Hi,
use map
$1E7A88;base map for variable swirl control [-];VSA_rBase_MAP;16x14
115jtd
10th February, 2020, 06:07 PM
connected plug?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.