Log In Code required for Audi A8 4E (2003) Brake Electronics

[Andi 85]

Hello members,

I have to change my brake electronic ECU (03) and I tried to code this ECU with VCDS. Unfortunately I need the log in code to do the coding. Can shttps://uploads.tapatalk-cdn.com/20200618/b0960b3e8959fb0cd5d64ea8d89052e5.jpg
ome one help me please to find out the log in. VCDS is not showing the code. Thanks in advance.

[cotymoto]

You need to see the label that is in the trunk under the carpet so you can code that unit.

Enviado desde mi SM-G973F mediante Tapatalk

[real898]

http://wiki.ross-tech.com/wiki/index.php/Audi_A8_(4E)_Parking_Brake

[Andi 85]

Thanks for your support. I know the coding, but I don’t know the log in code? Normally, VCDS is showing you the log in code but not for this Unit...Where can I find the log in code? Thanks.

[real898]

Note: When replacing this Control Module it is necessary to perform the Basic Settings Function Test (MVB 010) and Longitudinal Acceleration Sensor (MVB 020) first. This sets a Readiness Bit for each of the Basic Settings, Coding will not be accepted without having done this first! Make sure to adapt the Brake Pad Thickness after Coding the module.



you have read the instructions you do not need a login code

[Andi 85]

Note: When replacing this Control Module it is necessary to perform the Basic Settings Function Test (MVB 010) and Longitudinal Acceleration Sensor (MVB 020) first. This sets a Readiness Bit for each of the Basic Settings, Coding will not be accepted without having done this first! Make sure to adapt the Brake Pad Thickness after Coding the module.



you have read the instructions you do not need a login code

Thank you for your help!


Gesendet von iPhone mit Tapatalk

[Andi 85]

[QUOTE=Andi 85;3898412]Thank you for your help!