FIAT DUCATO EDC15C7 0281010489 IMMO OFF +NO MIL

[tethirim]

Hi mates, I have a client with a Ducato 2002 and have Bosch ecu 0281010489. I have read with programmer the 29f400bt and the eeprom 95080 memory. I tried to do everything through some software, but the MIL error ends up appearing. I have also installed Julie emulator, and although they support these units in their file, it does not work correctly. What options can I take ?. I think the defect may be in the eeprom part. Thank you all

727195
727196

[kiszka]

Hi mates, I have a client with a Ducato 2002 and have Bosch ecu 0281010489. I have read with programmer the 29f400bt and the eeprom 95080 memory. I tried to do everything through some software, but the MIL error ends up appearing. I have also installed Julie emulator, and although they support these units in their file, it does not work correctly. What options can I take ?. I think the defect may be in the eeprom part. Thank you all

727195
727196
press buttons
https://mega.nz/file/NnQRXSbb

[tethirim]

Hi kiszka , not necessary to modify eeprom to off the MIL light!?. Because i have a modified flash file, works fine ,but when i push the accelerator pedal the lights comes on

[kiszka]

Hi kiszka , not necessary to modify eeprom to off the MIL light!?. Because i have a modified flash file, works fine ,but when i push the accelerator pedal the lights comes on

I think you have to look for other hidden faults
in ecu by removing errors from the list in ecu
-------------------------------------------------

you were hoping for a miracle if you did not describe the fault exactly
I'm tired of guessing what exactly someone wants to achieve

[pluto2013]

Hi kiszka , not necessary to modify eeprom to off the MIL light!?. Because i have a modified flash file, works fine ,but when i push the accelerator pedal the lights comes on

did you find a solution for ?

[marimsa]

I think you have to look for other hidden faults
in ecu by removing errors from the list in ecu
-------------------------------------------------

you were hoping for a miracle if you did not describe the fault exactly
I'm tired of guessing what exactly someone wants to achieve

Have the same problem.
Flash an EPP atached.
Did you find any solution for the Check Engine light issue?

[kiszka]

Have the same problem.
Flash an EPP atached.
Did you find any solution for the Check Engine light issue?
eeprom is misread read it as 95p08
and do virgin eeprom and it should be fine

[kppow666]

I'll say it once and for the last time for free. Use search. If you have problems with the check engine after adding gas, eeprom line 180, write complete to 00 00. Problem solved

[kiszka]

I'll say it once and for the last time for free. Use search. If you have problems with the check engine after adding gas, eeprom line 180, write complete to 00 00. Problem solved

I'll tell you one last time too
eeprom is misread read it as 95p08

your advice is good but with this erroneous eeprom reading you can put it in four letters for it to work there must be a correct reading
you understand

[kppow666]

I didn't look at how he read the file, I say solving the problem with gas and check engine. Tested 100 times