Passat cc 2010 2.0 tdi edc17cp14 help

[Mr BLACK]

Car is not starting and no diagnostic on engine ecu after someone try to flash ecu by obd with some tool ... ecu 0281015029 03l907309
..what can i do to make car working ....ecu is in programing mode ?.....Thanx

[begi1]

Car is not starting and no diagnostic on engine ecu after someone try to flash ecu by obd with some tool ... ecu 0281015029 03l907309
..what can i do to make car working ....ecu is in programing mode ?.....Thanx


flash .fgo with ODIS or VCP

[Mr BLACK]

do you have .fgo file or is in odis ?

[Mr BLACK]

if i try to flash ecu in boot mode ....?

[Mr BLACK]

ecu is in programing mode ...briked....i do not have odis...

[jurebv]

read boot and post here

[Mr BLACK]

boot read .....

[Stig33]

Try upload this flash in boot mode and please send me report....no pass

[Mr BLACK]

i flash dump from you ...now ecu is in running mode ..now i have to test to car ...

[Stig33]

I think with this flash the car will working again... :)

[Mr BLACK]

no ...car is not starting : fault code : control unit

[Stig33]

If you have VCDS, try coding the ECU.

[Mr BLACK]

after i put ecu to car ...ecu is in programing mode

[Mr BLACK]

here is a set o dump from another ecu ....can i program this files and immo off ecu ...or someone can do immo off for this files with no dash warning

[Stig33]

Upload this pack(FLASH+EEP) to second ECU....Send report..

[Mr BLACK]

i go to try on car ...and raport. Thanx

[Stig33]

i go to try on car ...and raport. Thanx


This pack is not IMMO OFF, I transferred the IMMO,VIN,CS, etc... from old ECU to second ECU.

I hope it will working to you.

[Stig33]

here is a set o dump from another ecu ....can i program this files and immo off ecu ...or someone can do immo off for this files with no dash warning

Worked the transferring ?

[Mr BLACK]

transfer ok car not start ...immo active ..i do immo off car start ..i move car ..and after 30 min i go to start car ...and no start ....i remove ecu from car and is burn ...so second ecu is out of use ....( the man who put ecu to car do somethin ....:mad-new:) ..........

[robert1232]

if u have magpro flex or your frends
fix this problem

[Mr BLACK]

i solved ... i cks eeprom (orig eeprom) write in boot mode , write flash (orig flash ) in boot mode after that ecu in Programing Mode car no start , i put ecu to car and flash by obd flash from boot mode read ( not flash read by obd) ...and car start :dancing: